Troy-Bilt STORM Series Table of Contents, Finding and Recording Model Number, Customer Support

Page 2

This Operator’s Manual is an important part of your new snow thrower. It will help you assemble, prepare, and maintain the unit for best performance. Please read and understand what it says.

Table of Contents

Safety Labels

3

Maintaining Your Snow Thrower

....................... 14

Safe Operation Practices

4

Off-Season Storage

18

Setting Up Your Snow Thrower

6

Troubleshooting

19

Operating Your Snow Thrower

8

Illustrated Parts List

20

Making Adjustments

12

Warranty

Back Cover

Specifications are subject to change without notification or obligation. Images may not reflect your exact model and are for reference purposes only.

Finding and Recording Model Number

BEFORE ASSEMBLING YOUR NEW EQUIPMENT,

 

 

please locate the model plate on the equipment

 

 

and copy the information to the sample model plate

 

 

provided to the right. You can locate the model plate

 

 

by standing at the operating position and looking

 

 

down at the rear of the deck. This information will

 

TROY-BILT LLC

be necessary to use the manufacturer’s web site, or

 

when obtaining assistance from the Customer Sup-

www.troybilt.com

P. O. BOX 361131

CLEVELAND, OH 44136

port Department or an authorized service dealer.

 

330-558-7220

 

1-800-520-5520

Customer Support

Please do NOT return the unit to the retailer from which it was purchased,

without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, you can seek help from the experts. Choose from the options below:

•Visit www.troybilt.com

•Call a Customer Support Representative at 1-800-520-5520.

•The engine manufacturer is responsible for all engine-related issues with regard to performance, power-rating, specifications, warranty, and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with your unit, for more information.



Page 1 Page 3
Image 2
Page 1 Page 3
Contents 10/2006 Two-Stage Snow Thrower Storm SeriesMTD LLC, P.O. BOX 361131 CLEVELAND, Ohio Customer Support Table of ContentsFinding and Recording Model Number 53% %842! #!54/ %. /0%2!4 Chute clean-out tool is fastened to the topYour Responsibility %, 352&!#%3Practices Your Responsibility Restrict the useDo not modify engine Your ResponsibilityRemove the unit from the crate or carton Setting Up Your Snow ThrowerPosition the chute assembly over the base, see Figure Setting Up Your Snow Tire PressureOperating Your Snow Thrower Know Your Snow ThrowerAuger Control Clean-Out ToolChute Assembly Drive Control / Auger Clutch LockElectric Starter Chute Clean-Out ToolGas & Oil Fill-Up Recoil StarterAuger Control Test To Engage DriveTo Engage Augers Auger Control Making AdjustmentsChute Assembly Shift CableSkid Shoes Chute Bracket AdjustmentTo adjust the skid shoes Lubrication Maintaining Your Snow ThrowerEngine Shave Plate Skid ShoesAuger Belt Replacement Unhook the support bracket spring from the frameRemove and replace belt in the reverse order Drive Belt ReplacementAugers Friction Wheel Removal Remove the rubber ring from between the platesPreparing Snow Thrower Off-Season StoragePreparing Engine Short-Term StorageTrouble- shooting For further details Contact an authorized Service centerThis section addresses minor service issues Style N To order replacement Parts, call Or visit                684-04106A Handle Assembly, Lock, LH631-04134A Handle Assembly, Lock, RH 684-04105A 710-0224 Screw, #10-16 710-04586 Screw, 1/4-20 710-123367 70 17 9 712-0413 684-04153684-04154 736-0287Page Page MANUFACTURER’S Limited Warranty for U.S.A Canada
Top Page Image Contents