Troy-Bilt 1130, 1028 manual Table of Contents

Page 2

TABLE OF CONTENTS

Content

Page

Content

Page

Important Safe Operation Practices

3

Servicing Your Snow Thrower

14

Assembling Your Snow Thrower

5

Trouble Shooting

17

Know Your Snow Thrower

6

Illustrated Parts

18

Operating Your Snow Thrower

8

Commercial Warranty

31

Making Adjustments

11

Residential Warranty

32

Maintaining Your Snow Thrower

12

 

 

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new snow thrower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Before you start assembling your new equipment, please locate the model plate on the equipment and copy the information from it in the space provided below. A sample model plate is also given below. You can locate the model plate by standing at the operating position and looking down at the rear of the snow thrower. This information will be necessary to use the manufacturer’s web site and/or help from the Customer Support Department or an authorized service dealer.

Copy the model number here:

Copy the serial number here:

TROY-BILT LLC P. O. BOX 361131

www.troybilt.com CLEVELAND, OH 44136 330-558-7220

1-800-520-5520

CUSTOMER SUPPORT

Please do NOT return the unit to the retailer from where it was purchased, without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, you can seek help from the experts. Choose from the options below:

Visit troybilt.com for many useful suggestions. Click on Customer Support button and you will get the four options reproduced here. Click on the appropriate button and help is immediately available.

The answer you are

 

The answer you are

looking for could be just

 

looking for could be just

a mouse click away!

 

a mouse click away!

 

 

 

 

If you prefer to reach a Customer Support Representative, please call 1-800-520-5520.

Engine

The engine manufacturer is responsible for all engine-related issues with regards to

performance, power-rating, specifications, warranty and service. Please refer to the engine

Manual

 

manufacturer’s Owner’s/Operator’s Manual, packed separately with your unit, for more

 

information.

2

Image 2
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingMaintenance and Storage Assembling Your Snow Thrower Drive Control / Auger Control Lock Clean-Out ToolKnow Your Snow Thrower Auger Drive Control Heated Handles Switch ModelSafety Ignition Key Chute Tilt ControlOperating Your Snow Thrower To Engage Augers To Stop EngineTo Engage Track Drive Recoil StarterSnow Thrower Model Drift Cutter Kit All models OEM-390-679 Drift Cutters If EquippedOperating Tips 150F. Avoid these areasDrive Control and Shift Lever Chute AssemblyAuger Control Skid Shoes Shift Rod AdjustmentMaintaining Your Snow Thrower CarburetorAuger Shaft Drive / Auger Control LockGear Case Auger BearingsAugers Belt Removal And ReplacementServicing Your Snow Thrower Shave Plate and Skid ShoesDrive Belt Engine Off-Season StorageTroubleshooting Problem Cause RemedyParts List for Models 1028 Models 1028 Part DescriptionModel Cable Tie 31 23 51 -04871 Spacer, 1.25OD x.75ID x 3/16 Lg Supplied On engine Models 1028 22 20 238 Models 1028 Models 1028 Models 1028 Page MANUFACTURER’S Limited Commercial Warranty For MANUFACTURER’S Limited Warranty for