Snapper 155223 important safety instructions Operating Instructions

Page 29

Section 2 - OPERATING INSTRUCTIONS

WARNING

Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.

2.2.9.ENGAGING AUGER

1.Pull auger control lever against handle to engage auger. Refer to Figure 2.6.

2.2.10.ENGAGING WHEEL DRIVE

1.Move wheel drive control lever against handle to engage wheel drive. Ground speed can be adjusted while the machine is moving by changing position of the ground speed control. Machine has four forward speeds and one reverse. Refer to Figure 2.6.

WARNING

Release auger clutch control and make sure

auger/impeller has STOPPED before rotating discharge chute, or adjusting deflector. DO NOT place hands near auger/impeller while engine is running.

2.2.11.DISCHARGE CHUTE and DEFLECTOR

ADJUSTMENT

1.Release auger control and wheel drive control levers to allow auger and ground speed to come to a complete stop.

2.Loosen deflector knob and position deflector to desired angle. Retighten knob.

3.Rotate chute crank to position discharge chute in desired direction. Refer to Figure 2.6.

2.2.12.STOPPING - ENGINE, AUGER & WHEEL

DRIVE

Stop the auger and wheel drive by releasing the auger and wheel drive control levers. Stop the engine by moving the engine speed control the stop position or removing the key from the switch. Always remove key from key switch before leaving machine unattended. Refer to Figure 2.7.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Model Designation Series Designation Engine HP Auger Width TWO Stage Intermediate Frame Snow Thrower SeriesImportant Safety Instructions Maintenance and Storage Contents PRE-START Check List Operating InstructionsRecoil Start Models STARTING, Operation StoppingEngine Propelling Snow ThrowerEngaging Auger AdjustmentEngaging Wheel Drive Stopping ENGINE, Auger & Wheel DriveSTARTING, Operation & Stopping Electric Start Models Operating Instructions Introduction Service After First 5 Hours Check Auger Drive BeltCheck Wheel Drive Belt General LubricationStorage Procedure MaintenanceAdjustment Auger Belt Idler Pulley Adjustment ADJUSTMENT/REPLACEMENTDo not Auger Belt ReplacementW2t¢,o,,,vo Skid Shoe Adjustment Ground Speed AdjustmentHP Models Only Single Handle Control AdjustmentRubber Drive Tire Replacement Chute Crank AdjustmentUSE HRS Season Service Performed EachDisclaimer of Warranty Year Limited WarrantyTWO Stage Intermediate Frame Snow Thrower Series TWO Stage Intermediate Frame Snow Thrower Series Important Safety Instructions Maintenance and Storage Contents T4Q STARTING, Operation Stopping Oo,o,o WI STARTING, Operation & Stopping Electric Start Models Operating Instructions Maintenance Maintenance III V12 W2t¢,o,,,vo Ground Speed Adjustment Blowerclutch Chute Crank Adjustment Troubleshooting Year Limited Warranty TWO Stage Intermediate Frame Snow Thrower Series

155223 specifications

The Snapper 155223 is a highly regarded machine in the realm of outdoor power equipment, particularly recognized for its robust performance and innovative features. Designed for homeowners seeking an efficient lawn mowing solution, the Snapper 155223 combines power, durability, and user-friendly functionality.

One of the standout features of the Snapper 155223 is its 22-inch steel mowing deck. This deck provides a wide cutting area, allowing users to cover larger sections of lawn in less time. The durable steel construction ensures longevity, resisting the wear and tear that often comes from regular use. Additionally, the mowing deck is designed for a clean and precise cut, promoting healthy grass growth.

The Snapper 155223 is powered by a reliable Briggs & Stratton engine, specifically engineered to deliver consistent power and performance. This 190cc engine not only offers ample horsepower but also integrates fuel-efficient technology, making it an economical choice for lawn care. The engine's easy-start feature simplifies the startup process, allowing users to get to work quickly.

Tech-savvy advancements are evident in the Snapper 155223 as well. It features a variable speed self-propelled drive system that allows users to adjust the pace of the mower according to their comfort and the terrain's conditions. This adaptability is particularly beneficial when maneuvering around obstacles or tackling uneven ground.

The Snapper 155223 also emphasizes user comfort and convenience. Its ergonomic handle design minimizes fatigue during extended use, while the adjustable cutting height provides flexibility for different grass types and seasonal growth conditions. Users can select from multiple height settings to achieve the perfect cut.

Furthermore, maintenance is made easy with the Snapper 155223. The mower includes a rear discharge option and is compatible with mulching capabilities, allowing users the flexibility to choose how they want to manage grass clippings. The integrated washout port simplifies cleaning the mowing deck, enhancing the overall maintenance experience.

In summary, the Snapper 155223 stands out as a versatile and durable lawn mower, packed with features that cater to the needs of the modern homeowner. Its powerful engine, robust cutting deck, and user-friendly technologies make it an excellent choice for anyone looking to maintain a beautiful lawn efficiently and effectively.
Top Page Image Contents