Snapper 155223 important safety instructions Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following instructions may result in serious injury to the operator or other persons. The owner of the snow thrower must understand these instructions and, furthermore, must allow only persons who understand these instructions to operate snow thrower. Each person operating the snow thrower must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity, or judgment. If you have any questions pertaining to your snow thrower which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER,

McDonough, Georgia 30253. Phone: 800/935-2967.

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert

to the presence of children. Children are often attracted to the machine and the snow removal

activity. Never assume that the children will remain where you last saw them.

1.DO NOT allow children in the area when snow thrower is being operated.

2.DO NOT allow pre-teenage children to operate snow thrower.

3.ALLOW only responsible adults and teenagers with mature judgment to operate the machine and then only after being thoroughly instructed

and under the close supervision of an experienced adult operator.

4.Keep the area clear of all persons, particularly small children and pets.

5.Know how to STOP the snow thrower and disengage the controls quickly.

PREPARATION

(Continued From Previous Column)

7.Survey the area to be cleared beforehand and plan where snow is to be blown. Be prepared to

release auger/impeller clutch or to change discharge chute direction quickly to discharge

away from windows, cars, buildings and doorways to avoid property damage or personal injury from hurled objects.

8.Use only approved extension cords and receptacles in good condition and with sufficient capacity to carry the current to the machine if equipped with electric starting motors.

9.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Store only in an approved fuel container. Never remove fuel cap or add fuel with the engine running. Add fuel outdoors only with the engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke. DO NOT run engine indoors.

PREPARATION

1.Warn everyone in advance to stay clear of area. Keep especially watchful for children and pets darting into area while operating.

2.Read, understand, and follow instructions and warnings in this manual and on the machine. Know the controls and the proper use of the snow thrower before starting.

3.Data indicates that operators, age 60 and above, are involved in a large percentage of snow thrower-related injuries. These operators should evaluate their ability to operate the snow thrower safely enough to protect themselves and others from serious injury.

4.Disengage all clutches and shift into neutral before starting the engine (motor).

5.Wear adequate winter clothing including boots which will give you maximum footing on slippery surfaces. Exercise CAUTION to avoid slipping or falling.

6.Before the first snow fall, check the area to be cleared and remove all objects such as doormats, sticks, toys, wires, rocks, etc., which could be hurled or jam the snow thrower

OPERATIONAL PRECAUTIONS

1.Before starting, make visual check to make sure auger/impeller housing is clear and all guards and shields are in place and tight.

2.DO NOT operate machine without proper guards shields, deflectors, or other safety protective devices in place and functioning properly.

3.Should the auger/impeller become clogged, release the auger/impeller clutch control and, as an additional precaution, STOP the engine

before attempting to unclog the auger/impeller or discharge chute.

4.DO NOT attempt to unclog the auger/impeller or discharge chute by reaching in with your hands. Use a long stick or similar implement to unclog.

5.DO NOT attempt to unclog the auger/impeller or discharge chute with the engine running. STOP engine and remove key.

6.STOP engine (motor) and remove key before leaving the operator position for any reason.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents TWO Stage Intermediate Frame Snow Thrower Series Model Designation Series Designation Engine HP Auger WidthImportant Safety Instructions Maintenance and Storage Contents Operating Instructions PRE-START Check ListEngine STARTING, Operation StoppingRecoil Start Models Propelling Snow ThrowerEngaging Wheel Drive AdjustmentEngaging Auger Stopping ENGINE, Auger & Wheel DriveSTARTING, Operation & Stopping Electric Start Models Operating Instructions Check Wheel Drive Belt Service After First 5 Hours Check Auger Drive BeltIntroduction General LubricationMaintenance Storage ProcedureADJUSTMENT/REPLACEMENT Adjustment Auger Belt Idler Pulley AdjustmentAuger Belt Replacement Do notW2t¢,o,,,vo Ground Speed Adjustment Skid Shoe AdjustmentSingle Handle Control Adjustment HP Models OnlyChute Crank Adjustment Rubber Drive Tire ReplacementService Performed Each USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyTWO Stage Intermediate Frame Snow Thrower Series TWO Stage Intermediate Frame Snow Thrower Series Important Safety Instructions Maintenance and Storage Contents T4Q STARTING, Operation Stopping Oo,o,o WI STARTING, Operation & Stopping Electric Start Models Operating Instructions Maintenance Maintenance III V12 W2t¢,o,,,vo Ground Speed Adjustment Blowerclutch Chute Crank Adjustment Troubleshooting Year Limited Warranty TWO Stage Intermediate Frame Snow Thrower Series

155223 specifications

The Snapper 155223 is a highly regarded machine in the realm of outdoor power equipment, particularly recognized for its robust performance and innovative features. Designed for homeowners seeking an efficient lawn mowing solution, the Snapper 155223 combines power, durability, and user-friendly functionality.

One of the standout features of the Snapper 155223 is its 22-inch steel mowing deck. This deck provides a wide cutting area, allowing users to cover larger sections of lawn in less time. The durable steel construction ensures longevity, resisting the wear and tear that often comes from regular use. Additionally, the mowing deck is designed for a clean and precise cut, promoting healthy grass growth.

The Snapper 155223 is powered by a reliable Briggs & Stratton engine, specifically engineered to deliver consistent power and performance. This 190cc engine not only offers ample horsepower but also integrates fuel-efficient technology, making it an economical choice for lawn care. The engine's easy-start feature simplifies the startup process, allowing users to get to work quickly.

Tech-savvy advancements are evident in the Snapper 155223 as well. It features a variable speed self-propelled drive system that allows users to adjust the pace of the mower according to their comfort and the terrain's conditions. This adaptability is particularly beneficial when maneuvering around obstacles or tackling uneven ground.

The Snapper 155223 also emphasizes user comfort and convenience. Its ergonomic handle design minimizes fatigue during extended use, while the adjustable cutting height provides flexibility for different grass types and seasonal growth conditions. Users can select from multiple height settings to achieve the perfect cut.

Furthermore, maintenance is made easy with the Snapper 155223. The mower includes a rear discharge option and is compatible with mulching capabilities, allowing users the flexibility to choose how they want to manage grass clippings. The integrated washout port simplifies cleaning the mowing deck, enhancing the overall maintenance experience.

In summary, the Snapper 155223 stands out as a versatile and durable lawn mower, packed with features that cater to the needs of the modern homeowner. Its powerful engine, robust cutting deck, and user-friendly technologies make it an excellent choice for anyone looking to maintain a beautiful lawn efficiently and effectively.
Top Page Image Contents