Bass Management, Damp Locations, Trafos | Boston Acoustics VRi585T2

Bass Management

If you are using your T2 loud- speaker with a surround-sound processor and subwoofer, set the bass management control to “small” for the VRi585T2 and the DSi465T2.

Consult your surround-sound receiver or processor manual for instructions on changing bass man- agement settings.

Damp Locations

If the T2 loudspeaker is installed in a damp location (kitchen, bath- room), it should be positioned so that moisture will not collect inside.

The Boston Designer speaker is NOT for use in locations where it will be submerged.

Optional Brackets for New Construction

For new construction installations, we offer new construction brackets. The NCB brackets act as a perfect guide when cutting the drywall.

Model Bracket

VRi585T2 NCBR8

DSi465T2 NCBR6

Transformers

We have provided space on the crossover boards of the VRi585T2 and DSi465T2 for mounting two 25/70-volt distribution transformers.

To Remove Grille

If you need to remove the grille, gently lift it out at the edges. Use a sharp, pointed instrument such as an awl or the optional Boston Acoustics grille pick.

Gestión de graves

Si utiliza el altavoz T2 con una procesadora de sonido ambiental y un altavoz de graves, configure la gestión del control de graves en “small” (pequeño) para los equipos VRi585T2 y DSi465T2.

Consulte las instrucciones sobre cómo cambiar los parámetros de la gestión de graves en el manual del receptor o la procesadora de sonido ambiental.

Ubicaciones húmedas

Si se instala el altavoz T2 en un lugar húmedo (como la cocina o el cuarto de baño), debe colocarse de forma que dicha humedad no caiga en el interior.

El altavoz Boston Designer NO debe usarse en lugares donde que- den sumergidos.

Soportes opcionales para construcciones nuevas

Para instalaciones en construc- ciones nuevas, ofrecemos nuevos soportes de construcción. Los soportes NCB actúan como una guía perfecta cuando se corta el panel de yeso.

Modelo Abrazadera

VRi585T2 NCBR8

DSi465T2 NCBR6

Transformadores

Hemos dejado espacio entre los paneles de unión de los equipos VRi585T2 y DSi465T2 para la insta- lación de dos transformadores de distribución de 25/70 V.

Para retirar la rejilla

Si necesita quitar la rejilla, tire de ella suavemente por los bordes. Utilice un instrumento afilado acabado en punta, como un pun- zón o el pico de rejilla opcional de Boston Acoustics.

Gestion des basses

Si vous allez utiliser votre enceinte T2 avec un processeur de son Surround et un subwoofer, réglez le contrôle de gestion des basses à « small » (faible) pour les enceintes VRi585T2 et DSi465T2.

Consultez le mode d’emploi de votre récepteur ou processeur Surround pour des instructions à propos de la modification des réglages de gestion de basses.

Emplacements humides

Lorsque l’enceinte T2 est installée dans un endroit humide (cuisine, salle de bain), vous devriez la posi- tionner de façon que l’humidité ne puisse s’accumuler dans l’enceinte.

L’enceinte Boston Designer N’EST PAS conçu pour être submergé !

Supports optionnels pour nouvelle construction

Pour des installations dans de nouvelles constructions, nous dis- posons de supports pour nouvelles constructions. Les supports NCB font office de guide parfait pour effectuer la découpe.

Modèle Support

VRi585T2 NCBR8

DSi465T2 NCBR6

Transformateurs

Nous avons prévu un espace sur les circuits de transition des VRi585T2 et DSi465T2 pour le montage de deux transformateurs de distribution de 25/70 V.

Pour retirer la grille

Si vous avez besoin de retirer la grille, soulevez-la doucement sur les bords. Utilisez un instrument pointu, tel qu’un aune ou le poinçon de grille optionnel de Boston Acoustics.

Steuerung der

Basswiedergabe

Verwenden Sie Ihren T2-Speaker mit einem Surround-Soundprozessor und Subwoofer, stellen Sie die Steuerung der Basswiedergabe auf „small“ (niedrig) für den VRi585T2 und den DSi465T2.

Lesen Sie die Anleitungen zur Änderung der Basswiedergabe in dem Handbuch Ihres Surround- Sound-Receivers oder -Prozessors.

Feuchte Installationsorte

Wird der T2-Speaker an einer Stelle installiert, wo Feuchtigkeit herrscht (Küche, Badezimmer), ihn so positionieren, dass die Feuchtig- keit sich nicht darin ansammeln kann.

Den Boston Designer-Speaker nicht an Stellen installieren, wo er überflutet werden kann.

Optionale Bügel für

Neukonstruktionen

Für Neukonstruktionen können neue Einbaubügel verwendet wer- den. Die NCB-Bügel dienen als Führungselemente beim Ausschnei- den der Gipsplatten.

Modell Bügel

VRi585T2 NCBR8

DSi465T2 NCBR6

Trafos

Wir haben auf den Platten der Frequenzweichen des VRi585T2 und des DSi465T2 Platz für zwei 25/70 Volt Trafos geschaffen.

Abnehmen des Gitters

Soll das Gitter entfernt werden, es leicht an den Kanten ausheben. Einen scharfen spitzen Gegenstand wie eine Dorn oder den bei Boston Acoustics auf Anfrage erhältlichen Gitterhaken verwenden.

– 11 –

VRi585T2, DSi465T2 specifications

The Boston Acoustics DSi465T2 and VRi585T2 are exceptional speakers that exemplify the brand's commitment to delivering high-performance audio solutions for both home and professional environments. Each model features advanced technologies and characteristics designed to provide an immersive listening experience, whether you're enjoying your favorite music, watching movies, or entertaining guests.

The DSi465T2 is a 6.5-inch in-wall speaker that emphasizes versatility and aesthetic appeal. It integrates seamlessly into any room without sacrificing sound quality. This model utilizes a proprietary Boston Acoustics technology to create a rich and detailed soundstage, ensuring audio clarity across a wide range of frequencies. The 1-inch soft dome tweeter offers smooth high frequencies, while the polypropylene woofer delivers punchy bass. The DSi465T2’s acoustic filter allows users to adjust the speaker’s performance according to the room's acoustics, making it adaptable to various environments.

On the other hand, the VRi585T2 is a premium in-ceiling speaker that showcases Boston Acoustics’ ingenuity in speaker design. With an 8-inch polypropylene woofer, this model is engineered for larger spaces and offers an exceptionally powerful bass response. The 1-inch silk dome tweeter provides refined treble articulation, enhancing the overall audio experience. One of its standout features is the integrated swivel tweeter, allowing for precise sound directionality. This ensures that listeners receive optimal audio quality from various locations within the room.

Both models incorporate Boston Acoustics' innovative mounting system, making installation straightforward and secure. Additionally, they feature paintable grilles, allowing homeowners to customize their look to match their décor.

The DSi465T2 and VRi585T2 are crafted with high-quality materials to ensure durability and longevity. They are designed to operate in various environments, making them suitable for both new builds and retrofitting into existing spaces.

In conclusion, the Boston Acoustics DSi465T2 and VRi585T2 speakers represent a perfect blend of innovative technology, superior sound quality, and aesthetic versatility. Whether used in a home theater setup or as part of a whole-house audio system, these speakers offer an excellent solution for audiophiles seeking to enhance their audio experience. With their top-tier features and performance capabilities, they are worthy investments for anyone serious about sound.