White Outdoor 1150W, 850W manual Maintaining Your Snow Thrower, Drive Wheels, Skid Shoe Adjustment

Page 11

Drive Wheels

The wheels may be adjusted for two different methods of operation. The adjustment is made by placing the click pins in one of two different holes on the right side of the unit. See Figure 10.

Inside Hole

In Axle

Click Pin In

Outside Hole

Figure 10

One Wheel Driving: Insert the click pin only through the outside hole of the axle (NOT the rim) on the right side of the snow thrower. This position gives power

drive to the left wheel only, making the unit easier to maneuver.

Both Wheels Driving: Insert the click pin through the hole in the hub of the rim and the INSIDE hole on the snow thrower’s right axle. This position is good for heavy snow as there is power drive in both wheels.

IMPORTANT: NEVER operate the snow thrower with the click pin inserted through both the RIM and the OUTSIDE HOLE in the axle. Doing so can result in serious damage to the drive system.

Skid Shoe Adjustment

The space between the shave plate and the ground can be adjusted by raising or lowering the skid shoes. Refer to Skid Shoe Adjustment in the Assembly Section.

Auger Control Adjustment

Refer to the information found under Final Adjustments in the Assembly Section to adjust the auger control.

SECTION 6: MAINTAINING YOUR SNOW THROWER

WARNING: Before lubricating, repairing, or inspecting, disengage all clutch levers and stop engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting.

Lubrication

Engine

Refer to the separate engine manual packed with your unit for all engine lubrication instructions.

IMPORTANT: When following instructions in separate engine manual for draining oil, be sure to protect frame to avoid oil dripping onto transmission parts.

Gear Shaft

Lubricate the gear shaft with 6-n-1 grease at least once a season or after every 25 hours of operation (available at automotive stores, or order part number 737-0170).

Refer to Figure 8.

IMPORTANT: Keep all grease and oil off of the rubber friction wheel and aluminum drive plate.

Drive and Shifting Mechanism

Lubricate at least once a season or after every 25 hours of operation. Remove the rear cover, lubricate any chains, sprockets, gears, bearings, shafts, and shifting mechanism at least once a season. Use engine oil or a

spray lubricant. Avoid getting oil on the friction wheel rubber and aluminum drive plate. Refer to Figure 8.

There is a grease fitting on the top of the axle shaft which drives the rear track drive wheels on both sides of the unit. Grease these fittings every 25 hours or once a season.

Electric Chute-Rotation Motor

The gear on the electric chute-rotation motor and the base of the discharge chute itself should be lubed with multi-purpose automotive grease once a season. See Figure 11.

Lube Gear &

Chute Base

Figure 11

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Table of Contents Operation Important Safe Operation PracticesTraining PreparationYour Responsibility Maintenance And StorageLoose Parts AssemblyAssembling Your Snow Thrower UnpackingTraction Control and Shift Lever Adjustment Final AdjustmentsAuger Control Adjustment Skid Shoe AdjustmentSkid Shoe Know Your Snow ThrowerChute Tilt Control Auger Drive ControlOperating Your Snow Thrower To Engage Augers Recoil StarterTo Stop Engine To Engage Wheel DriveShift Rod Adjustment Chute Assembly AdjustmentTraction Control Adjustment Drive Wheels Skid Shoe AdjustmentAuger Control Adjustment Maintaining Your Snow ThrowerAugers Belt Removal And ReplacementServicing Your Snow Thrower EngineDrive Belt Replacing Friction Wheel RubberOff-season Storage Problem Cause Remedy Trouble ShootingPage Part Description Models 850W & 1150WModels 850W / 1150W 736-0159 Washer Models 850W / 1150W Carriage Bolt, 5/16-18 x Models 850W / 1150W Models 850W / 1150W Models 850W / 1150W 784-5590 Page Page MANUFACTURER’S Limited Warranty for

850W, 1150W specifications

The White Outdoor 1150W and 850W models represent a line of powerful and reliable outdoor equipment tailored for both professional and residential use. Renowned for their exceptional performance, these machines are equipped with advanced technologies that make them suitable for various outdoor tasks, including snow removal, leaf blowing, and lawn care.

One of the standout features of the White Outdoor 1150W is its robust 1150-watt motor. This motor provides ample power to tackle heavy-duty tasks without compromising efficiency. The design of the motor allows for optimal airflow, ensuring that the machine operates smoothly even under demanding conditions. Similarly, the 850W model, while slightly less powerful, is still equipped with an efficient 850-watt motor that delivers strong performance for everyday outdoor chores.

Both models boast user-friendly designs, emphasizing comfort and ease of use. The ergonomic handles are designed to reduce fatigue during extended use, making them ideal for those who may spend long hours working outdoors. The lightweight structure of both units enhances maneuverability, allowing users to navigate tight spaces and carry the machines effortlessly.

Another significant characteristic of the White Outdoor series is their versatile functionality. The 1150W model often features multiple speed settings, enabling users to adjust the power output according to the task at hand. This adaptability makes it perfect for various applications, from gentle blowing for delicate flowers to powerful blasts for clearing heavy debris. The 850W model, while simpler, still offers dependable performance for standard clean-up jobs.

Safety is a paramount consideration in these designs. Both models include features such as thermal overload protection, which prevents the motors from overheating during prolonged use. Additionally, the machines are built with durable materials that withstand harsh weather conditions, ensuring longevity and reliability.

In terms of technology, both the 1150W and 850W benefit from energy-efficient engineering that not only saves power but also minimizes environmental impact. This is linked to an emphasis on creating machines that balance performance with sustainability.

In conclusion, the White Outdoor 1150W and 850W models are excellent choices for anyone looking to enhance their outdoor maintenance capabilities. With powerful motors, user-friendly designs, versatile functionality, and a focus on safety and sustainability, these machines stand out as reliable tools for accomplishing a wide range of outdoor tasks.
Top Page Image Contents