GE ZIR36N RH, ZIR36N LH Installation, Door Hinge Case Hinge, 36″ Refrigerators, Freezers

Installation

36″ Refrigerators, Freezers

Step 11	Check door alignment. The top of the door should
Adjust Door	be parallel with the grille panel. If the door appears
Alignment	to be too high or too low on the handle side,
	adjustments can be made by turning the hinge.
	• To raise the door, turn adjustable hinge pin
	towards the right.
	• To lower the door, turn hinge pin towards the left.
	Turn the hinge pin with a 5/16″ wrench or, on some
	models, use the 3/16″ Allen wrench taped to the
	hinge.

Step 12	• Remove internal packing materials.
Arrange Interior	• Remove tape from all shelves.
and Set	• Set control at “5”.
Temperature
Controls	IMPORTANT: Allow 24 hours for temperatures to
	stabilize before making adjustments.
Step 13	• Start the switch to I (on). The green light will come
Start	on and the icemaker will begin operation
Icemaker	automatically.
	• Be sure nothing interferes with the sweep of the
	feeler arm.
	• Discard the first few batches of ice cubes.
	• To turn the icemaker off, set the switch to O (off).
	Allow 45 minutes for the icemaker to resume
	operation.

Door Should be Parallel

With Grille Panel

Bushing

Door Hinge

Case Hinge

Raise

Pin Shoulder

5/16" Wrench

Power Switch

Feeler Arm

Green Power Light

Step 14	• A standard toekick is supplied. Install with 2 screws
Install	provided, adjust to desired height and tighten
Toekick	screws.
	IMPORTANT: The vented toekick must remain
	unobstructed for proper air circulation and operation.

18