GE ZIR36N LH ZUG75 Trim Kit, Door Hinge Case Hinge, Unified 3/4″ Custom Grille Panel Kit

Step 11

Adjust

Door

Alignment

ZUG75 Trim Kit

Unified 3/4″ Custom Grille Panel Kit

Bushing

Door Hinge

Case Hinge

Raise

Pin Shoulder

5/16" Wrench

Check door alignment. The top of the door should be parallel with the grille panel. If the door appears to be too high or too low on the handle side, adjustments can be made.

•Use a 5/16″ wrench to turn the hinge.

•To raise the door, turn adjustable hinge pin towards the right.

•To lower the door, turn hinge pin towards the left.

NOTE: While performing installations described in this book, safety glasses or goggles should be worn.

For Monogram® local service in your area, call 1.800.444.1845.

NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.

Pub. No. 49-60055-4

Dwg. No. 197D2785P001

GE Consumer & Industrial

Appliances

General Electric Company Louisville, KY 40225 ge.com

08-07 JR