CUSTOM PANEL DIMENSIONS
Custom Panel Dimensions
|
|
|
| 36″ Refrigerators, Freezers | |
|
|
|
Custom Door Panel Dimensions Using Standard Trim | ZIR36N Refrigerator | |
1/4″ thick panels | ZIF36N Freezer | |
or | •1/4″ Panel: Cut panels to size. | |
Panels secured to 1/4″ thick backing | •Custom handle with 1/4″ door panel requires Trim | |
| kits ZKHR1 or ZKHRSS1 for tubular stainless steel | |
| handles. | |
|
| |
1/4" Thick
Custom Panel
Standard Trim with Panels secured to 1/4″ thick backing
•Applying a raised panel design to a 1/4″ thick
| backing (screws or glued): Cut 1/4″ thick panels to | ||||
| size. Fabricate the raised panel to permit at least 2″ | ||||
| fingertip clearance of the standard handle. | ||||
| clearance from the hinge side to avoid striking | ||||
adjacent cabinetry and 5/16″ from the top and | |||||
bottom edges to allow for the trim flange. | |||||
| |||||
| NOTE: ZKHTR1 custom handle kit cannot be used in | ||||
| this configuration. | ||||
|
| Custom Grille Panel | |||
|
| 35 1/8" |
|
| |
|
|
|
| ||
|
|
|
|
| |
| 8" | 1/4" Thick Panel |
| ||
|
|
|
|
| |
IMPORTANT: Maximum total weight for assembled door panel is 67 lbs., maximum grille panel weight is 9 lbs.
Raised Panel on 1/4" Thick Backing
Using Standard Handles
The grille panel frame is factory assembled for 84″ installation height. If installation height varies, order ZGC2 trim kit that provides optional side trim pieces. Cut grille panel to sizes shown below.
Installation Height | Panel Height |
|
|
1/4"
Thick
Backing
Appearance Panel
2" Clearance handle Side
5/16" Clearance |
Raised Panel |
on 1/4" Thick |
Backing With |
Standard |
Handles |
5/16" Clearance |
5/16" Clearance
8
