GE ZIR36N LH, ZIF36N RH, ZIR36N RH, ZIF36N LH ZKTR36LH/ZKTR36RH Trim Kit, 3/4″ Custom Panels, Step

ZKTR36LH/ZKTR36RH Trim Kit

3/4″ Custom Panels

Step 5	• Install new door handle using original screws.
Install
handles

Step 6	• For shipping purposes, the top case trim is secured
Adjust	at the 84″ installation height.	Screws
grille	• Loosen 2 screws on both sides of the case trim
panel height	and raise or lower trim to meet soffit height, from
	83-1/2″to 84-1/2″.

• Tighten all 4 screws.	Top Case Trim
IMPORTANT: Maintain 1-1/2″min. gap between top of
door and bottom of grille panel.	Raise To
	Installation
	Height

Step 7	• Secure the grille panel support to the back side of
Secure 3/4″	the 3/4″ custom panel with #6 screws.
panel to	• Be sure the lip of the support is over the top of the
grille panel	wood panel.
support
	Panel Support
	Overlaps Top

24