GE ZIR36N LH, ZIF36N RH, ZIR36N RH ZKHR1 Trim Kit For 1/4″ Panels, Support for Custom Handles

	ZKHR1 Trim Kit (For 1/4″ Panels)
	Support for Custom Handles
Tools and materials required:	Right hand door swing models are illustrated in these
• #2 Phillips screwdriver	instructions. Follow these instructions for left hand
• Drill and appropriate bits	models.
• Custom door panel
• Custom Handle
• Safety glasses

Parts List:

A. Handle side door extrusion (for left hand models)

B. Handle side door extrusion (for right hand models)

This kit provides the necessary framework to install a custom handle, of your choice, onto a 1/4″ thick custom panel. (Handles not included.) The extrusions in this kit allow the custom handle to be secured to the door structure, rather than the door panel.

•Select the extrusion for your model, discard other extrusion.

Step 1	• Open door to 90°. Remove the screws from the full
Remove	length aluminum handle.
handle	• Retain screws. Discard handle.

20