White Outdoor 31AH7Q3G190 Shave Plate and Skid Shoes, Belt Removal And Replacement, Auger Belts

Page 13

Shave Plate and Skid Shoes

The shave plate and skid shoes on the bottom of the snow thrower are subject to wear. They should be checked periodically and replaced when necessary. To remove the skid shoes, proceed as follows:

Remove the six carriage bolts, bell washers, and hex nuts which attach them to the snow thrower.

Reassemble new skid shoes with the six carriage bolts, bell washers (cupped side goes against skid shoes) and hex nuts. Make certain the skid shoes

are adjusted to be level.

To remove shave plate, remove the carriage bolts, bell washers, and hex nuts which attach it to the snow thrower housing. Reassemble new shave plate, making sure heads of the carriage bolts are to the inside of the housing. Tighten securely.

Belt Removal And Replacement

Auger Belts

Remove the plastic belt cover by removing the two self-tapping screws. See Figure 13.

Drain the gasoline from the snow thrower.

Tip the snow thrower up and forward so that it rests on its auger housing.

Self-Tapping

Screw

Belt Cover

Figure 13

Remove the six self-tapping screws from the frame cover underneath the snow thrower.

Roll the front and rear auger belts off the engine pulley. See Figure 14.

Unhook the idler spring from the hex bolt on the auger housing. See Figure 14.

Back out the stop bolt until the support bracket rests on the auger pulley.

NOTE: Loosening the six nuts that connect the frame to the auger housing may aid in belt removal.

 

 

Drive

 

 

Pulley

Auger

 

Drive

Pulley

 

Belt

Idler

 

Idler

Pulley

 

Pulley

 

 

Auger

 

 

Belts

 

 

Frame

Support

 

 

Bracket

 

Frame

 

 

Auger

 

Support

Pulley

 

Bracket

Rear

 

Spring

 

 

Auger

 

 

Belt

 

 

Front

Idler

Auger

Housing

Auger Belt

Spring

 

 

 

Figure 14

Lift the auger belt from the auger pulley, and slip belt between the support bracket and the auger pulley. Repeat this step for the front auger belt.

Replace the auger drive belts by following instructions in reverse order.

Drive Belt

Follow the first four steps of the instructions for servicing the auger belts.

Pull the idler pulley up, and lift the belt off the engine pulley and friction wheel disc. See Figure 15.

Back out the stop bolt until the support bracket rests on the auger pulley.

Slip the belt between the friction wheel and drive disc. Remove and replace the belt. Reassemble following the instructions in reverse order.

NOTE: The support bracket must rest on the stop bolt after the new belt has been assembled.

13

Image 13
Contents OPERATOR’S Manual Table of Contents Training Important Safe Operation PracticesPreparation OperationMaintenance And Storage Assembling Your Snow Thrower AssemblyUnpacking Loose PartsAuger Control Adjustment Final AdjustmentsSkid Shoe Adjustment Traction Control and Shift Lever AdjustmentChute Tilt Control Know Your Snow ThrowerAuger Drive Control Skid ShoeSafety Ignition Key Electric Chute-Rotation SwitchHeated Handles Switch Track Steering ControlsOperating Your Snow Thrower Auger Control Adjustment Skid Shoe AdjustmentChute Assembly Adjustment Traction Control AdjustmentMaintaining Your Snow Thrower Shift Rod AdjustmentLubrication Engine Servicing Your Snow ThrowerAugers Shave Plate and Skid Shoes Belt Removal And ReplacementAuger Belts Drive BeltOff-season Storage Servicing Friction Wheel RubberPage Problem Cause Remedy TroubleshootingPart Description Model 31AH7Q3G190For Reference Only 17 -0620A Shift Rod Upper 18 -0621 Shift Rod Lower 749-0951 2321 Oyster Gray Powder Black Red Metallic Model 31AH7Q3G190 Models 31AH7Q3G190 22 20 Model 31AH7Q3G190 Models 31AH7Q3G190 Models 31AH7Q3G190 MANUFACTURER’S Limited Warranty for

31AH7Q3G190 specifications

The White Outdoor 31AH7Q3G190 is a versatile and robust snow blower designed to tackle the toughest winter conditions. Built to cater to homeowners looking for an efficient solution to their snow removal needs, this model combines power, durability, and user-friendly features.

One of the standout features of the 31AH7Q3G190 is its 24-inch clearing width, allowing users to clear a wide path quickly and effectively. This wide auger ensures that even heavier snow accumulations can be handled with ease, making it ideal for areas with significant snowfall. The snow blower boasts a powerful 208cc engine, providing the necessary torque and reliability needed to handle various snow conditions, from light flurries to heavy, wet snow.

The snow blower is equipped with a 6-speed transmission, offering operators the flexibility to adjust their speed as needed. This feature allows for efficient maneuvering, whether on flat driveways or sloped surfaces. Additionally, the unit features an adjustable chute that can rotate 180 degrees, giving users precise control over snow direction. This is particularly valuable when clearing driveways or sidewalks, enabling users to avoid unwanted snow piles.

For enhanced usability, the 31AH7Q3G190 is designed with electric start technology, ensuring that starting the machine is hassle-free. This is a particularly attractive feature for those who may struggle with traditional pull-start mechanisms in cold weather. The snow blower’s heavy-duty construction also includes reinforced handles that provide comfort and stability during operation, while the large, rugged tires offer superior traction, allowing users to traverse snowy terrains without slipping.

Safety is also a priority with this snow blower. It includes features such as an operator presence control, which ensures that the machine only operates when the user is in control. This minimizes the risk of accidents during operation, adding an extra layer of security.

In summary, the White Outdoor 31AH7Q3G190 snow blower combines power, efficiency, and user-centered design. Its durable build, powerful engine, and functional features make it an excellent choice for homeowners needing a reliable snow removal solution. Whether dealing with light dustings or heavy snowfalls, this snow blower delivers performance and convenience, ensuring that winter weather doesn't become a burden. Its combination of innovation and practicality stands as a testament to quality engineering, making it a valuable addition to any winter toolkit.