Cub Cadet 945 SWE, 928 SWE warranty Safety Symbols

Page 6

Safety Symbols

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.

Symbol

Description

READ THE OPERATOR’S MANUAL(S)

Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate

WARNING— ROTATING BLADES

Keep hands out of inlet and discharge openings while machine is running. There are rotating blades inside

WARNING— ROTATING BLADES

Keep hands out of inlet and discharge openings while machine is running. There are rotating blades inside

WARNING— ROTATING AUGER

Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with the rotating parts can amputate hands and feet.

WARNING—THROWN OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

WARNING—GASOLINE IS FLAMMABLE

Allow the engine to cool at least two minutes before refueling.

WARNING— CARBON MONOXIDE

Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

WARNING— ELECTRICAL SHOCK

Do not use the engine’s electric starter in the rain

warning! Your Responsibility—Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

SAVE THESE INSTRUCTIONS!

6

Section 2 — Important Safe Operation Practices

Image 6
Contents Operator’s Manual Thank You Table of ContentsTo The Owner Record Product InformationImportant Safe Operation Practices California Proposition TrainingPreparation Operation Safe Handling of GasolineMaintenance & Storage Do not modify engineSpark Arrestor Safety Symbols SymbolAssembly & Set-Up Contents of CartonAssembly Chute Assembly Chute Directional ControlAdjustments Set-UpTesting Drive Control & Shift Lever Adjusting Drive and Auger ControlsGas & Oil Fill-Up Choke Control Controls and FeaturesShift Lever Ignition KeyPrimer Bulb Electric Starter SwitchChute Assembly Oil FillChute Directional Control Chute Clean-Out ToolTwo-Way Chute Control Wheel Steering ControlsStopping The Engine OperationStarting The Engine Electric StarterTo Engage Augers Replacing Shear PinsTo Engage Drive Operating TipsMaintenance & Adjustments MaintenanceLubrication Gear Case Auger Control Tire PressureAuger Belt Replacement ServiceBelt Replacement Belt Removal PreparationPulley Slot Drive Belt Replacement Changing Friction WheelService Off-Season Storage Short-Term StorageLong-Term Storage Troubleshooting Problem Cause RemedyReplacement Parts ComponentPage Page CUB Cadet LLC MANUFACTURER’S Limited Warranty for