Cub Cadet 600 manual Skid Shoes

Page 15

.

Figure 17

Drive Control

When the drive control is released and in the disengaged “up” position, the cable should have very little slack. It should NOT be tight.

Check the adjustment of the drive control as follows:

1.

With the drive control disengaged,

 

 

push the snow thrower gently

 

 

forward. The unit should roll freely.

 

2.

Engage the drive control and gently

 

 

attempt to push the snow thrower

Disengaged

 

forward. The wheels should not turn.

 

 

The unit should not roll freely.

 

3.With the drive control disengaged, move the shift lever back and forth between the R2 position and the F6 position several times. There should be no resistance in the shift lever.

If any of the above tests failed, the drive cable is in need of adjustment. refer to Figure 18 and proceed as follows:

•Loosen the hex jam nut on the auger control cable “Z” fitting and rotate the coupling end (without turning the cable) of the cable downward to provide more slack or upward to take up slack. See Figure 18 .

Auger Control

Refer to Auger Control Test on Page 12 to adjust the auger control.

Figure 18

Skid Shoes

NOTE: The space between the skid shoes and the ground can be adjusted. See Figure 19. For close snow removal, place skid shoe in the low position. Use middle or high position when area to be cleared is uneven.

NOTE: Some models are equipped with reversible skid shoes and may be turned over to increase their lifespan. See Figure 19.

CAUTION: Loose gravel can be picked up and thrown by the auger, causing injury to the operator and bystanders and/or damage to the snow thrower and surrounding property.

•Adjust skid shoes by loosening the four hex nuts (two on each side) and carriage bolts. Move skid shoes to desired position.

•Make certain the entire bottom surface of skid shoe is against the ground to avoid uneven wear on the skid shoes. Retighten nuts and bolts securely.

•Retighten the hex jam nut and repeat all three tests to verify proper adjustment has been achieved.

Standard

Reversible

Figure 19- Skid Shoes

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Series Snowthrowers Table of Contents Training Important Safe Operation PracticesYour Responsibility Maintenance And StorageUnpacking Setting UP Your Snow ThrowerBefore Assembly Setting up the Snow ThrowerFor Models with 4 Way Chute Control Box Chute Assembly all modelsChute Clean-out Tool Final AdjustmentsSkid Shoe Oil Fill Knowing Your Snow ThrowerThrottle Control PrimerChute Directional Control optional Clean-Out ToolAuger Control Way Chute Control optionalOperating Your Snow Thrower For models with optional interlock mechanism only Stopping The EngineTo Engage Drive To Engage AugersOperating Tips To Throw SnowTire Chains on models so equipped Chute Clean-Out ToolDrift Cutters on models so equipped Drift Cutter KitChute Bracket Adjustment Shift Rod AdjustmentSkid Shoes Augers EngineLubrication Shave Plate and Skid ShoesReplacing Belts Auger BeltDrive Belt Friction Wheel Rubber OFF-SEASON Storage Trouble Shooting Tractor Attachment Warranty Three 3 Year Limited WarrantyAuger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Part RÉF Pièce Description Page Part RÉF Pièce Description For models with 22 auger housings Part RÉF Pièce Description Styles H, K & L 31a-6006 Commerciale Utilisation Dépannage DE Guide 8 Chapitre Saison Hors Remisage 7 Chapitre Caoutchouc en bague la de Changement Frottement de roue la deFigure la Voir .le-écartez et Courroies les de Remplacement Patins et plate LameIllustrée po 30 de Tarière -21 Figure Moteur LubrificationPatins 19 Figure Tarière la de CommandeTransmission la de Commande PatinsRéglages 5 Chapitre Vitesses de levier du TigeGoulotte Goulotte la de dégagement de Outil ’utilisation ConseilsPneu pour Chaînes Coupe de BarresTarière la embrayer Pour Neige la projeter PourMoteur du Arrêt Transmission la embrayer PourGoulotte TarièresLanceur à démarreur de Poignée ’entraînement de Commande Tarière la de CommandeOption en fonctions 2 à goulotte la de Commande Option en fonctions 4 à goulotte la de Commande’obturateur de Commande AmorceurDépart de Volet Neige la de dégagement de Outil «Réglage» chapitre le dans goulotte» Carton du Déballage Montage 2 ChapitreSouffleuse la de Assemblage ’assemblage AvantResponsabilité Votre Remisage ET Entretien Formation PréparationChapitre VENTE-APRÈS Service600 séries Souffleuses

600 specifications

The Cub Cadet 600 series represents a significant innovation in the realm of lawn care and gardening, catering to homeowners and professional landscapers alike. This standout line of riding lawn mowers combines powerful performance with advanced technology, rendering it a top choice for those aiming for beautifully manicured lawns.

At the heart of the Cub Cadet 600 is a robust engine that delivers exceptional power and reliability. Featuring a range of engine options, users can select the horsepower that best suits their mowing needs. The efficient fuel system optimizes performance and minimizes emissions, adhering to modern environmental standards.

One of the major highlights of the Cub Cadet 600 is its cutting system. Equipped with a precision-engineered deck, it allows for a clean, even cut on various types of terrain. The adjustable cutting height features multiple positions, giving users the flexibility to tackle different grass lengths and types seamlessly. The stamped steel construction of the deck ensures durability and longevity, making it resistant to wear and tear over time.

The 600 series also boasts advanced technology such as the Cub Cadet Smart Jet cleaning system, which simplifies maintenance by ensuring the mower deck is free of grass clippings and debris. This system promotes optimum performance and extends the life of the mower.

Ergonomics play a vital role in the design of the Cub Cadet 600. The operator's station is crafted for comfort, featuring an adjustable seat with ample cushioning. The intuitive control layout allows for easy operation, making it accessible for users of all experience levels. Additionally, the steering wheel is designed for enhanced maneuverability, especially in tight spaces.

To enhance productivity, the Cub Cadet 600 includes a tight turning radius, allowing for excellent maneuvering around obstacles. Users can navigate gardens, flower beds, and trees with ease, minimizing the need for additional trimming.

The series also supports a range of accessories such as baggers, mulch kits, and towing attachments, further increasing its versatility. This adaptability makes the Cub Cadet 600 not just a mower, but a comprehensive landscaping tool.

In summary, the Cub Cadet 600 combines power, precision, and user-friendly features, making it an exceptional choice for anyone looking to maintain their lawn with professionalism. With its advanced technologies and rugged construction, the 600 series stands out as a leader in modern lawn care solutions.
Top Page Image Contents