Cub Cadet 600 manual Chute Assembly all models, For Models with 4 Way Chute Control Box

Page 6

Chute Assembly (all models)

1.Apply a light lubricant (i.e. 3-in-1 oil) to the base of the chute assembly.

2.Place the chute assembly on the lip of the chute adapter. See Figure 3

3.One end of each chute keeper is already attached to the chute flange. Pivot the free end of the chute keeper to align it with the chute flange and push it till it snaps into position. See Figure 4. Repeat with remaining chute keepers.

Chute

Assembly

21

Figure 3

Chute

Assembly

3

Chute Keeper

Figure 4

For Models with 4 Way Chute Control Box

1.Pull the hairpin clip out of the clevis pin on the chute support tube. Save this hardware.

	Hairpin Clip	4 Way
	Hairpin Clip	Chute
		Chute
		Control
		Box
		Clevis
		Pin
		Chute Support
		Tube

Figure 5

Cables

Short

Tube

Chute Support

Tube

Figure 6

2.Position the chute assembly so the chute opening is facing the front of the unit.

3.Place the chute control box on the short tube of the chute assembly and the chute support tube of the chute assembly as shown in Figure 6, cables should be towards the operator.

4.Insert the clevis pin, earlier removed, through the holes on the chute control box and chute support tube. Secure with the hairpin clip. See Figure 5.

For Models with 2Way Chute Control

1.Slip the cables, running from the chute to the handle panel into the cable guide located on top of the engine. See Figure 7 .

Cable Guide

Figure 7

Models with a Chute Directional Control

1.Remove the flat washer and hairpin clip from the end of the chute directional control. Insert the end of the chute directional control into the lower bracket and secure with the flat washer and hairpin clip just removed. See Figure 8.

NOTE: If necessary, the lower bracket can be adjusted. Refer to Chute Bracket Adjustment. in the Adjustment Section.

6

Image 6

Contents Series Snowthrowers Table of Contents Important Safe Operation Practices TrainingMaintenance And Storage Your ResponsibilitySetting up the Snow Thrower Setting UP Your Snow ThrowerBefore Assembly UnpackingChute Assembly all models For Models with 4 Way Chute Control BoxChute Clean-out Tool Final AdjustmentsSkid Shoe Primer Knowing Your Snow ThrowerThrottle Control Oil FillWay Chute Control optional Clean-Out ToolAuger Control Chute Directional Control optionalOperating Your Snow Thrower To Engage Augers Stopping The EngineTo Engage Drive For models with optional interlock mechanism onlyTo Throw Snow Operating TipsDrift Cutter Kit Chute Clean-Out ToolDrift Cutters on models so equipped Tire Chains on models so equippedShift Rod Adjustment Chute Bracket AdjustmentSkid Shoes Shave Plate and Skid Shoes EngineLubrication AugersReplacing Belts Auger BeltDrive Belt Friction Wheel Rubber OFF-SEASON Storage Trouble Shooting Three 3 Year Limited Warranty Tractor Attachment WarrantyAuger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Part RÉF Pièce Description Page Part RÉF Pièce Description For models with 22 auger housings Part RÉF Pièce Description Styles H, K & L 31a-6006 Commerciale Utilisation Dépannage DE Guide 8 Chapitre Saison Hors Remisage 7 Chapitre Frottement de roue la de Caoutchouc en bague la de ChangementFigure la Voir .le-écartez et Courroies les de Remplacement Patins et plate LameIllustrée po 30 de Tarière -21 Figure Lubrification MoteurPatins Tarière la de CommandeTransmission la de Commande Patins 19 FigureRéglages 5 Chapitre Vitesses de levier du TigeGoulotte Coupe de Barres ’utilisation ConseilsPneu pour Chaînes Goulotte la de dégagement de OutilNeige la projeter Pour Tarière la embrayer PourTransmission la embrayer Pour Moteur du ArrêtGoulotte TarièresLanceur à démarreur de Poignée Option en fonctions 4 à goulotte la de Commande Tarière la de CommandeOption en fonctions 2 à goulotte la de Commande ’entraînement de Commande’obturateur de Commande AmorceurDépart de Volet Neige la de dégagement de Outil «Réglage» chapitre le dans goulotte» ’assemblage Avant Montage 2 ChapitreSouffleuse la de Assemblage Carton du DéballageResponsabilité Votre Remisage ET Entretien Préparation FormationVENTE-APRÈS Service Chapitre600 séries Souffleuses