Cub Cadet 600 manual Your Responsibility, Maintenance And Storage

Page 4

7.Muffler and engine become hot and can cause a burn. Do not touch.

8.Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic.

9.Exercise caution when changing direction and while operating on slopes.

10.Plan your snow throwing pattern to avoid discharge towards windows, walls, cars etc. To avoid property damage or personal injury caused by a ricochet.

11.Never direct discharge at children, bystanders and pets or allow anyone in front of the machine.

12.Do not overload machine capacity by attempting to clear snow at too fast of a rate.

13.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

14.Disengage power to the auger/impeller when transporting or not in use.

15.Never operate machine at high transport speeds on slippery surfaces. Look down and behind and use care when in reverse.

16.If the machine should start to vibrate abnormally, stop the engine, disconnect the spark plug and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operating.

17.Disengage the control handle and stop engine before you leave the operating position (behind the handles). Wait until the auger comes to a complete stop before unclogging the discharge chute, making any adjustments, or inspections.

18.Never put your hand in the discharge or collector openings. Always use a clearing tool to unclog the discharge opening.

19.Use only attachments and accessories approved by the manufacturer.

20.If situations occur which are not covered in this manual, use care and good judgment. Call customer assistance for the name of your nearest servicing dealer.

Maintenance And Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Disengage the control handle and stop engine. Wait until the auger/impeller come to a complete stop. Disconnect the spark plug wire and ground against the engine to prevent unintended starting before cleaning, repairing, or inspecting.

3.Check bolts, and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

4.Do not change the engine governor setting or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

5.Snow thrower shave plates and skid shoes are subject to wear and damage. For your safety protection, frequently check all components and replace with original equipment manufacturer’s (O.E.M.) parts only. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

6.Check controls periodically to verify they engage and disengage properly and adjust, if necessary. Refer to the adjustment section in this operator’s manual for instructions.

7.Maintain or replace safety and instruction labels, as necessary.

8.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

9.Prior to storing, run machine a few minutes to clear snow from machine and prevent freeze up of auger/impeller.

10.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

11.Always refer to the operator’s manual for proper instructions on off-season storage.

Your Responsibility:

•Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Series Snowthrowers Table of Contents Important Safe Operation Practices TrainingMaintenance And Storage Your ResponsibilitySetting UP Your Snow Thrower Before AssemblySetting up the Snow Thrower UnpackingChute Assembly all models For Models with 4 Way Chute Control BoxFinal Adjustments Chute Clean-out ToolSkid Shoe Knowing Your Snow Thrower Throttle ControlPrimer Oil FillClean-Out Tool Auger ControlWay Chute Control optional Chute Directional Control optionalOperating Your Snow Thrower Stopping The Engine To Engage DriveTo Engage Augers For models with optional interlock mechanism onlyTo Throw Snow Operating TipsChute Clean-Out Tool Drift Cutters on models so equippedDrift Cutter Kit Tire Chains on models so equippedShift Rod Adjustment Chute Bracket AdjustmentSkid Shoes Engine LubricationShave Plate and Skid Shoes AugersAuger Belt Replacing BeltsDrive Belt Friction Wheel Rubber OFF-SEASON Storage Trouble Shooting Three 3 Year Limited Warranty Tractor Attachment WarrantyAuger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Part RÉF Pièce Description Page Part RÉF Pièce Description For models with 22 auger housings Part RÉF Pièce Description Styles H, K & L 31a-6006 Commerciale Utilisation Dépannage DE Guide 8 Chapitre Saison Hors Remisage 7 Chapitre Frottement de roue la de Caoutchouc en bague la de ChangementFigure la Voir .le-écartez et Patins et plate Lame Courroies les de RemplacementIllustrée po 30 de Tarière -21 Figure Lubrification MoteurTarière la de Commande Transmission la de CommandePatins Patins 19 FigureVitesses de levier du Tige Réglages 5 ChapitreGoulotte ’utilisation Conseils Pneu pour ChaînesCoupe de Barres Goulotte la de dégagement de OutilNeige la projeter Pour Tarière la embrayer PourTransmission la embrayer Pour Moteur du ArrêtTarières GoulotteLanceur à démarreur de Poignée Tarière la de Commande Option en fonctions 2 à goulotte la de CommandeOption en fonctions 4 à goulotte la de Commande ’entraînement de CommandeAmorceur ’obturateur de CommandeDépart de Volet Neige la de dégagement de Outil «Réglage» chapitre le dans goulotte» Montage 2 Chapitre Souffleuse la de Assemblage’assemblage Avant Carton du DéballageResponsabilité Votre Remisage ET Entretien Préparation FormationVENTE-APRÈS Service Chapitre600 séries Souffleuses

600 specifications

The Cub Cadet 600 series represents a significant innovation in the realm of lawn care and gardening, catering to homeowners and professional landscapers alike. This standout line of riding lawn mowers combines powerful performance with advanced technology, rendering it a top choice for those aiming for beautifully manicured lawns.

At the heart of the Cub Cadet 600 is a robust engine that delivers exceptional power and reliability. Featuring a range of engine options, users can select the horsepower that best suits their mowing needs. The efficient fuel system optimizes performance and minimizes emissions, adhering to modern environmental standards.

One of the major highlights of the Cub Cadet 600 is its cutting system. Equipped with a precision-engineered deck, it allows for a clean, even cut on various types of terrain. The adjustable cutting height features multiple positions, giving users the flexibility to tackle different grass lengths and types seamlessly. The stamped steel construction of the deck ensures durability and longevity, making it resistant to wear and tear over time.

The 600 series also boasts advanced technology such as the Cub Cadet Smart Jet cleaning system, which simplifies maintenance by ensuring the mower deck is free of grass clippings and debris. This system promotes optimum performance and extends the life of the mower.

Ergonomics play a vital role in the design of the Cub Cadet 600. The operator's station is crafted for comfort, featuring an adjustable seat with ample cushioning. The intuitive control layout allows for easy operation, making it accessible for users of all experience levels. Additionally, the steering wheel is designed for enhanced maneuverability, especially in tight spaces.

To enhance productivity, the Cub Cadet 600 includes a tight turning radius, allowing for excellent maneuvering around obstacles. Users can navigate gardens, flower beds, and trees with ease, minimizing the need for additional trimming.

The series also supports a range of accessories such as baggers, mulch kits, and towing attachments, further increasing its versatility. This adaptability makes the Cub Cadet 600 not just a mower, but a comprehensive landscaping tool.

In summary, the Cub Cadet 600 combines power, precision, and user-friendly features, making it an exceptional choice for anyone looking to maintain their lawn with professionalism. With its advanced technologies and rugged construction, the 600 series stands out as a leader in modern lawn care solutions.
Top Page Image Contents