Buhler FK314 manual Basic Assembly Instructions, Step

Page 6

 

 

 

85” Snowblower

 

 

BASIC ASSEMBLY INSTRUCTIONS

STEP 1.

Assemble the snow chute, referring to instructions under the appropriate

 

heading for “manual chute” or “hydraulic chute”.

STEP 2.

Check the gearbox and fill to the lower level with a winter grade

 

transmission oil.

 

STEP 3.

The snowblower is shipped with lower three point hitch pins for a category

 

2 hitch.

 

 

STEP 4.

Using tape or bright colored marking pen, mark on the outer shields of the

 

PTO, the position where the shaft is completely pushed together and the

 

position where you have a 4” overlap. Watch these marks when moving

 

the blower through all possible operating angles to see that the PTO shaft

 

stays within this range.

 

STEP 5.

With the engine on the tractor shut off, attach the PTO shaft. The tractor

 

end has a standard 6-spline end with a spring loaded locking collar. The

 

snowblower end has a clamp style yoke with a 3/8” keyway. Slide the

 

yoke onto the gearbox shaft with the 3/8” shaft supplied. Lock the yoke in

 

place with a ½” x 3” hex bolt and lock nut fitted through the groove in the

 

gearbox shaft. After tightening the bolt, insert and tighten the 3/8” socket

 

set screw supplied.

CAUTION: Always check to see that

 

both ends of the PTO shaft are securely attached every time the

 

snowblower is used. This should always be done with the tractor shut off.

STEP 6.

Check that the PTO shaft does not bottom or separate with the

 

snowblower in the extreme high and low positions. A longer optional PTO

 

shaft is available if the standard shaft is too short. Check for free

 

movement of all parts in various raised positions: particularly the PTO

 

shaft.

 

 

STEP 7.

NOTE:

Excessive u-joint wear and shear pin failure may result if the

 

PTO angle exceeds 20° . The drawing below gives an approximate way to

 

check this angle. With the PTO half extended, the tractor output should

 

not be over 28 inches high. Use 30 inches if the PTO is nearly fully

 

extended and 26 inches if it is nearly compressed.

- 4 -

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Table of Contents Description Government Legislation Warranty ClaimsWarranty Labor Important FactsThis Symbol Means Stay ALERT! Watch for IT Snowblower Basic Assembly Instructions StepOperating Instructions Allied Snowblower Snowblower When Ordering Parts Item # DescriptionPage Manual Chute Control Manual Chute Control Hydraulic Snow Chute Hydraulic Chute Control Allied Snowblower PTO Snowblower PTO Standard Snowblower PTO Optional Long Gear BOX Assembly Gearbox Assembly Parts List BU50505 75 X 5 Cylinder Assembly Options Available Buhler Manufacturing a partnership
Related manuals
Manual 22 pages 3.3 Kb

FK314 specifications

The Buhler FK314 is a cutting-edge grain processing machine designed to enhance the efficiency and productivity of flour mills and grain handling facilities. Known for its robust construction and innovative design, the FK314 seamlessly integrates advanced technologies that cater to the demands of modern milling operations.

One of the standout features of the Buhler FK314 is its state-of-the-art grinding mechanism. It employs a unique combination of precision-engineered rollers that deliver consistent particle size reduction, ensuring high-quality flour output. The design allows for adjustable grinding gaps, enabling operators to customize the texture and fineness of the flour according to specific product requirements.

Another significant aspect of the FK314 is its energy-efficient operational capabilities. The machine is built with energy-saving technologies that reduce power consumption without compromising performance. This efficiency not only lowers operational costs for milling facilities but also aligns with global sustainability initiatives aimed at minimizing energy footprints in agricultural processing.

Incorporating advanced automation and control systems, the Buhler FK314 allows for precise monitoring and management of the milling process. Its user-friendly interface and digital touchpoints facilitate real-time adjustments, ensuring optimal performance throughout the milling cycle. Operators can easily track product quality and machine efficiency, making data-driven decisions to streamline operations.

The FK314 also prioritizes user safety and ease of maintenance. With features such as easy access to components for cleaning and servicing, operators can maintain the machine with minimal downtime. The use of high-quality materials and components enhances the machine's durability, ensuring a long operational life and low maintenance requirements.

Moreover, the Buhler FK314 is designed with modularity in mind, making it easily adaptable to various milling setups. Whether integrated into new facility designs or retrofitted into existing spaces, its versatility allows mill operators to enhance their processing capabilities seamlessly.

In summary, the Buhler FK314 stands out as a premier choice for milling operations seeking to optimize efficiency and quality. With its innovative grinding technology, energy efficiency, advanced automation, and user-oriented design, the FK314 makes significant contributions to modern grain processing and flour production, ensuring that it remains a pivotal asset in the agricultural industry.
Top Page Image Contents