Craftsman 536.88614 Limited TWO-YEAR Warranty on Craftsman Snow Thrower, Training, Preparation

Page 2

Table

of

Contents

2

Service

and Adjustments

17-21

Warranty

 

2

Storage

 

22

Safety

Rules

2-4

Troubleshooting

23

Contents

of Shipping Carton

4-5

Repair

Parts

24-32

Assembly

 

5-8

Engine

Repair Parts

33-37

Operation

 

8-14

Spanish(EspaSol)

38-63

Maintenance

14-16

Parts Ordering/Service

Back Cover

LIMITED TWO-YEAR WARRANTY ON CRAFTSMAN SNOW THROWER

For two years from the date of purchase, when this Craftsman Snow Thrower is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner'smanual, Craftsman will repair, free of charge, any defect in material or workmanship.

If this Craftsman Snow Thrower is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase..

This warranty does not cover the following:

Items which become wom during normal use, such as spark plugs, drive belts and shear pins.

Repairs necessary because of operator abuse or negligence, including bent crank

shafts and the failure to maintain the equipment according to the instructions con- tained in the owner'smanual.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE CRAFTSMAN SNOW

THROWER TO THE NEAREST CRAFTSMAN SERVICE CENTER/DEPARTMENT IN THE

UNITED STATES. THIS WARRANTY APPLIES ONLY WHILE THIS PRODUCT IS IN USE IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179

/_ Look for this symbol to point out Important safety precauUons. It means--

ATTENTION!I! Become alertll! Your safety is involved,

Z_ CAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug to prevent accidental starting when setting-up, transporting, adjusting or making repairs.

IMPORTANT: Safety standards require operator presence controls to minimize the risk of injury. Your snow thrower is equipped with such controls. Do not attempt to defeat the function of the operator presence control under any circumstances.

California Proposition 65

WARNING: Tho

TRAINING

1.Read the operator's manual carefully. Be thoroughly familiar with the controls and the proper use of the snow throws Know how to stop the snow thrower ar disengage the controls quickly.

2.Never allow children to operate the sr thrower and keep them away while it operating. Never allow adults to oper the snow thrower without proper inst_ tion. Do not carry passengers.

3.Keep the area of operation clear of f persons, particularly small children pets. °

4.Exercise caution to avoid slipping c falling, especially when operating I, reverse.

PREPARATION

. Thoroughly inspect the area whw snow thrower is to be used an_

all doormats, sleds, boards, wit other foreign objects.

Image 2
Contents Crrftsmrw Preparation Limited TWO-YEAR Warranty on Craftsman Snow ThrowerTraining Operation ExpandMaintenance Andstorage Extended period= Clutch Able Height adjust 16 X To Install the Upper Handle and Crank AssemblyTo Remove Snow Thrower from Carton To Assemble Snow Chute Control CablesChecklist HOW to SET UP Your Snow ThrowerKnow Your Snow Thrower StopBackward Howto Useyour Snow Thrower To Stop Your Snow ThrowerTo Control Snow Discharge To USE Wheel Lockout PINBefore Starting the Engine Fill OILFill GAS To Stop Engine Cold StartFrozen Recoil Starter Cold StartWarm Start Snow Throwing TipsPark Plug Customer Responsibilities Service Schedule Records DatesProduct Specifications Horse Power 5HP Displacement RJ19LMLubrication Every 25 Hours Generalrecommendationssnow ThrowerAfter First USE OIL Recommendation LubricationEngine Lubrication To Adjust Scraper BAR To Adjust Skid HeightTo Adjust the Clutch Control Cables Traction Drive Belt To Adjust Belts Auger Drive BeltAuger Drive Belt To Replace BeltsTo Adjust the Friction Wheel To Adjust the Belt GuidesTo Replace Friction Wheel To Replace Auger Shear BoltTo Adjust To AdjustcarburetorTo Adjust or Replace Spark Plug To ReplaceOther Snow Thrower StorageEngine Storage Unit fails to discharge snow Trouble Cause CorrectionScrew #6-32x2.50 Electric Start Assembly Part NameEngine Assembly Artno Partname Part Name Craftsman 22 -5H.P.SNOW Thrower Frame Assembly Drive Assembly Washer, SpGear Case Assembly Auger Housing Assembly @ @Part NO. Part Name Discharge Chute Assembly Part NameBOO Part Name Refi Handle AssemblyNO. Part no Wheel Assembly 579857Chute Control ROD Assembly DecalsCraftsman 4-CYCLE Engine Model Number 20A 640053 Idle Restrictor Screw CAPCraftsman 4-CYCLE Engine Modee Number EF. PART# I Part Name IEF. I PART#REF. PART# Part Name STARTER, Rewind 13 590574 HANDLE, StarterCraftsman 4-CYCLE Engine Model Number 143,985003 Starter no E REF. PART#Page Lll