Husqvarna 1827EXLT Assembly / PRE-OPERATION, Remove Snow Thrower from Carton, Unfold Upper Handle

Page 6

ASSEMBLY / PRE-OPERATION

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Reading the entire manual will familiarize you with the unit, which will assist you in assembly, operation and maintenance of the product.

Your new snow thrower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your snow thrower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

REMOVE SNOW THROWER FROM CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut down all four corners of carton and lay panels flat.

3.Remove the two (2) screws securing the auger housing to the pallet.

4.Remove all packing materials except plastic tie holding speed control rod to lower handle.

5.Remove the two (2) plastic ties securing the upper handle to the pallet.

6.Remove snow thrower from carton and check carton thoroughly for additional loose parts.

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 10)

A toolbox is provided on your snow thrower. The toolbox is located on top of the belt cover. Store the extra shear bolts, nuts and multi-wrench provided in parts bag in the toolbox.

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely. Additional carriage bolts, washers and handle knobs are in bag of parts. Use to secure upper handle to lower handle. Install in lower holes in handles.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

 

RETAINER

 

SPRING

SPEED

SPEED

CONTROL

CONTROL

BRACKET

LEVER

FIG. 2

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Safe Operation Practices for Walk-Behind Snow Throwers Clearing a Clogged Discharge Chute Shut the Engine OFFTable of Contents Parts Packed Separately in Carton Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Install Chute Deflector Remote Control See FigsPrimer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting engineSET Height Adjustment See Figs Transport and Height Adjustment of Snow ThrowerHOW to USE Your Snow Thrower To Transport See FigsTo USE Choke Control See Fig Using the CLEAN-OUT Tool See FigTo USE Fuel SHUT-OFF Valve See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Power Steering Operation See FigTo Adjust Skid Plates See Fig Scraper BAR See FigCheck Engine OIL Level See Fig Before Starting the EngineTo USE Drift Cutters See Fig ADD Gasoline See FigSnow Throwing Tips Before StoppingIf Recoil Starter has Frozen General Recommendations Maintenance➀ SAE 30 Motor Oil ➁ See Engine Maintenance section Before Each USECleaning Snow ThrowerEngine Chute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Tracks See Fig Engine SpeedFuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionLimitations and Exclusions HOW to Obtain Service Consumer Wheeled Warranty Chart Qjlqh 7UDQVPLVVLRQ Service Notes 08/01/2011 SR

1827EXLT specifications

The Husqvarna 1827EXLT is a robust snow thrower designed to tackle harsh winter conditions with ease and efficiency. With its powerful engine and advanced features, it promises performance and reliability, making it an ideal choice for homeowners who need to clear driveways, walkways, and large areas of snow.

Equipped with a 272cc Husqvarna engine, the 1827EXLT provides an impressive output, ensuring that it can handle heavy and wet snow without any issues. The engine is designed for easy starting, even in cold weather conditions, making winter maintenance a hassle-free experience.

One of the standout features of the 1827EXLT is its two-stage snow throwing mechanism. This design utilizes an auger to collect snow, which is then propelled by an impeller through the chute. The result is efficient snow removal, where the snow can be thrown up to 33 feet away. This extended throwing distance ensures that you can clear large areas without needing to move snow back into already cleared sections.

The snow thrower boasts a clearing width of 27 inches, making it capable of handling wider paths and driveways in fewer passes. The adjustable skid shoes provide customization to the height at which the machine operates, allowing you to prevent damage to surfaces while effectively clearing snow.

The 1827EXLT also features a friction disc transmission that enables smooth speed changes, ensuring a comfortable operation. With six forward and two reverse gears, users can easily navigate various terrains and adapt to changing conditions.

Furthermore, the snow thrower is designed with user comfort in mind. It features heated grips, which significantly enhance the operator's comfort during prolonged use in cold conditions. The easy-to-use control panel provides quick access to all the essential functions, including chute rotation and deflection controls, enhancing the user's experience.

Durability is another big selling point of the Husqvarna 1827EXLT. Its heavy-duty steel frame and high-strength plastic components ensure long-lasting performance and resistance against wear.

In conclusion, the Husqvarna 1827EXLT is a powerful and reliable snow thrower that combines advanced features and user-friendly technology. It is perfect for those who need a dependable machine to keep their outdoor spaces clear during winter, ensuring practicality and efficiency in snow removal tasks. Whether dealing with heavy snowfalls or light dustings, the 1827EXLT stands ready to handle the job.
Top Page Image Contents