Husqvarna 96193005700, 1830SB manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 11

OPERATION

TO THROW SNOW (See Fig. 14)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 14

USING THE CLEAN-OUT TOOL (See Fig. 15)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

 

CLEAN-OUT

 

TOOL

 

MOUNTING

 

CLIP

 

FIG. 15

11

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 16

POWER STEERING OPERATION (See Fig. 17)

Steering triggers are used to assist in steering your snow thrower. The triggers are located on the underside of each handle. When a trigger is squeezed, it disen- gages the drive wheel on that side of snow thrower and allows it to turn in that direction.

•To turn left – squeeze left side trigger.

•To turn right – squeeze right side trigger.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 1830SB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Install Chute Deflector Remote Control See Figs Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Check Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerAuger control lever used to engage auger motion throw snow Meets A.N.S.I. Safety RequirementsTo USE Choke Control See Fig HOW to USE Your Snow ThrowerStopping To USE Fuel SHUT-OFF Valve See FigRelease the auger control lever and shut off the engine Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigBefore Starting the Engine If Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Wheels See Fig Remove the klik pin and remove wheel from axleEngine OIL StorageOther Fuel SystemTroubleshooting Service Notes Service Notes Service Notes 532 43 56-27 04.21.10 JA Warranty Statement

96193005700, 1830SB specifications

The Husqvarna 1830SB is a powerful snowblower designed to tackle the challenges of winter weather. Engineered for efficiency, durability, and ease of use, this model is ideal for homeowners with medium to large driveways, pathways, and outdoor spaces that require effective snow removal.

One of the standout features of the Husqvarna 1830SB is its 18-inch clearing width, allowing it to clear large areas more quickly than many other models on the market. Coupled with a 30-inch intake height, this snowblower can handle deep snow with ease, making it a reliable companion during heavy snowfall events.

The Husqvarna 1830SB is equipped with a powerful 342cc engine, providing ample power to drive the auger and impeller system effectively. This engine is designed to start reliably in cold temperatures, ensuring that users can operate the machine even in harsh winter conditions. The snowblower also features electric start functionality, further enhancing convenience for users who may struggle with traditional pull-start engines.

Another key characteristic of the 1830SB is its robust auger and impeller system, which excels at breaking up and propelling snow. The auger quickly retrieves snow from the ground, while the high-speed impeller efficiently casts snow to a distance of up to 35 feet. This feature ensures that both light and heavy snow can be thrown far from the cleared area, preventing snow buildup and allowing for quick status returns to the driveway or pathway.

The snowblower's adjustable drift cutters are an innovative feature that helps to effectively manage heavy, compacted snow, while the integrated LED lights increase visibility during early mornings or late evenings. The 180-degree adjustable chute allows users to direct the snow precisely where they want it, offering optimal control over the snow removal process.

Additionally, the Husqvarna 1830SB includes an easy-to-use control panel, which features simple handling options for speed and direction, making it user-friendly for both experienced operators and those new to snowblowing.

Constructed with a solid steel frame and high-quality materials, the Husqvarna 1830SB promises both reliability and longevity, ensuring it remains a staple in winter maintenance for years to come. Designed to meet the demands of tough winter conditions, the Husqvarna 1830SB stands out as a durable and efficient snow removal solution.
Top Page Image Contents