Bolens C Style Table of Contents, Finding and Recording Model Number, Customer Support, Warranty

Page 2
Table of Contents

This Operator’s Manual is an important part of your new snow thrower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Table of Contents

Safety Labels

3

Maintaining Your Snow Thrower

...................... 12

Safe Operation Practices

4

Off-SeasonStorage

16

Setting Up Your Snow Thrower

6

Trouble- Shooting

17

Operating Your Snow Thrower

8

Warranty

Back Cover

MakingAdjustments

10

 

 

Finding and Recording Model Number

BEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT,

please locate the model plate on the equipment and copy the information to the sample model plate provided to the right. You can locate the model plate by standing at the operating position and looking down at the rear of the deck . This information will be necessary to use the manufacturer’s web site and/or obtain assistance from the Customer Support Department or an authorized service dealer.

MTD LLC

P. O. BOX 361131

CLEVELAND,OH 44136

330-220-4683

www.mtdproducts.com 800-800-7310

Customer Support

Please do NOT return the unit to the retailer from which it was purchased,

without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, you can seek help from the experts. Choose from the options below:

1.Visit mtdproducts.com for many useful suggestions. Click on Customer Support button and you will get the options reproduced in the screen shot below. Click on the appropriate button and help is immediately available.

2.Phone a Customer Support Representative at 1(800) 800-7310.

3.The engine manufacturer is responsible for all engine-related issues with regard to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with your unit, for more information.

2

Image 2
Contents MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO OPERATOR’S MANUALTwo-Stage Snow Thrower - C, D Style Customer Support Table of ContentsFinding and Recording Model Number Warrantyin this manual and on the machine Safety LabelsRestrict the use Your ResponsibilityTrainingPreparation Safe OperationPractices HEED ITS WARNING Your Responsibility Restrict the useOperation Maintenance & StorageSafe Operation Practices Do not modify engineSetting Up Your Snow Thrower 3. Position the chute assembly over the baseTire Pressure Extinguish cigarettes, cigars, pipes and other sources of ignition Operating Your Snow ThrowerKnow Your Snow Thrower ForwardAuger Control If your home’s Gas & Oil Fill-UpStopping The Engine Electric StarterTo Engage Augers Chute Clean-Out ToolTo Engage Drive Recoil StarterMaking Adjustments To adjust the skid shoes Gear Shaft Maintaining Your Snow ThrowerEngine Wheelsproceed as follows Auger Belt Replacementreplacement auger belt place a piece of plastic under the gas cap3. a. Grasp the idler pulley and pivot it toward the right Friction Wheel Removal Reassemble the side plates with a new rubber ringPreparing Snow Thrower Off-Season StoragePreparing Engine Cause Trouble ShootingProblem RemedyStyles C & D or visit Illustrated Parts ListTo order replacement parts, contact Styles C & D Washer, Flat, .350 sq. x 631-04133Screw, Self-tapping, 5/16-18 Panel, Handle, no cutout C-StyleStyles C & D or visit Illustrated Parts ListTo order replacement parts, contact Page Page MANUFACTURER’S LIMITED WARRANTY FOR