AQUATECH Swimming Pool Cleaner manual Dear Customer

Dear Customer

Congratulations! You have purchased one of the best pool cleaners that technology can offer, the Jet Cleaner. The Jet Cleaner is a fully automatic robotic pool cleaner with the powerful Jet Drive Propulsion System. Through its unique design, the Jet Cleaner will systematically clean the entire pool, wash away debris with its Hydro-Scrubbing power washing jets and collect debris in the Filter Bag down to 2 microns in size. All you have to do is put the Jet Cleaner into your pool, turn its power on and let it do its job of filtering and vacuuming all the dirt and debris out of your pool.

Table of Contents
•POWER SUPPLY	2
•Jet Cleaner	2
•OPERATING INSTRUCTIONS	3
•ADJUSTING THE TIMING CYCLE	3
•CLEANING CYCLE	3
•REMOVING UNIT FROM THE POOL	4
•MAINTENANCE INSTRUCTIONS	4
•TROUBLESHOOTING	5
•CLEANING PATTERNS	6
•WARRANTY STATEMENT	7

WARNING

Improper connection of the polarized 3-prong grounding type outlet can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the cleaner—if it will not fit the outlet. Have a proper outlet installed by a qualified electrician. For your protection, a Ground Fault Current Interrupter (GFCI) should be installed.

Power Supply (Transformer)	Second Lock Pin
Jet Valve Housing
Fuse Holder	Handle
Power Switch
Lock Pin
	Hydro-Scrubbers
Axle Housing
Timer	Wheel
Floating Cord
Socket	Jet Cleaner Pool Cleaner
FIG.2

CAUTION

RISK OF ELECTRIC

SHOCK-DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

2