WARNING
USE SAFETY GLASSES OR OTHER FACE PROTECTION AGAINST POSSIBLE BATTERY EXPLOSION. DO NOT SMOKE AND AVOID OTHER SOURCES OF IGNITION.
10.Attach the positive battery cable (each end should have a rubber boot) to the positive terminal of the solenoid and to the positive terminal of the battery. Make sure these protective boots are covering the positive terminal post on the battery and on the solenoid. Attach one end of the remaining battery cable to the negative terminal of the battery.
11.Connect the negative battery terminal to the battery hold down post. When finished, make sure all wires are away from moving parts and lower engine shroud.
12.Plug cable from spreader into socket mounted on truck.
WARNING
Never operate machine with engine shroud in the upright position. Never climb into hopper while the engine is operating or capable of being operated.
SERIOUS INJURY or DEATH MIGHT OCCUR.
NOTE: Read and fully understand the owners manual supplied by the engine manufacturer before operating this equipment. Not doing so, endangers your safety and the warranty of the engine.
9