Installation Instructions

NOTE: All part numbers below refer to the parts shown on the Assembly Diagram (page 10) of this manual.

WARNING: BEFORE drilling pilot holes for any of the following mounting in- structions, take care that the location to be drilled in is free from all wires, cables, utility lines, and any other obstructions.

To Mount The Solar Panel Flat On A Surface:

1.Locate the Solar Panel so that it faces the sun the greater part of the day.

2.Model #04815 and #91013 have four mounting holes located on the back of the Solar Panel. Models #90860 and #90717 have eight mounting holes on the back of the Solar panel. To secure the Solar Panel, drill four 1/4” holes, appropriately spaced, through the mounting surface, and use four screws, lock-washers, and nuts (not provided). (See Figures A and B.)

1/4” MOUNTING	(REAR VIEW) 1/4” MOUNTING
HOLE	HOLE

	(SIDE VIEW)
LOCK WASHER	Hardware Not Included

MOUNTING SURFACE

NUT

SCREW

FIGURE A

To Mount The Solar Panel At An Angle:

FIGURE B

1.NOTE: For increased pickup of solar energy, and to minimize the collection of debris on the Solar Panel, it is recommended that the Solar Panel be installed on the mount- ing surface at an angle. (See Figure C, next page.)

2.In order to mount the Solar Panel at an angle, you will need to purchase or fabricate two angle brackets from wood or metal (not provided) as shown in Figure C (on page 6). For best results, it is recommended that the angle brackets be approximately 1” wide by 1/2” thick and of appropriate height.

SKUs 04815, 91013, 90860, & 90717

Page 5

4815, 90717, 91013, 90860 specifications

Harbor Freight Tools is known for its vast selection of tools and accessories, offering various products suitable for both DIY enthusiasts and professional contractors. Among their many offerings, the tools identified by model numbers 91013, 90717, 4815, and 90860 stand out for their performance and affordability, catering to a wide range of needs in various applications.

The Harbor Freight Tools 91013 is a 3-Ton Heavy Duty Floor Jack designed for efficiency and safety. Its low-profile design makes it ideal for sports cars and lowered vehicles, allowing mechanics easy access to perform maintenance tasks. With a capacity of up to three tons, it ensures the ability to lift heavy vehicles, and its dual pump system enables quick lifting, saving valuable time. The built-in safety features, including a rubber pad and a safety valve, provide sturdy support and enhance user protection during operations.

The 90717 model is a 12-Volt Car Vacuum designed for quick clean-ups in vehicles. This compact and lightweight model features a powerful motor that efficiently removes dirt and debris from car interiors. With its 16-foot power cord, the vacuum allows users to reach every corner of their vehicle with ease. It comes with a variety of attachments, enabling users to tackle different cleaning tasks, such as reaching tight spaces or cleaning upholstery.

Model 4815 is a 5-Inch Random Orbit Palm Sander, perfect for achieving a smooth finish on various surfaces. This palm sander combines power and ergonomics, featuring a low vibration design that allows for longer usage without fatigue. It operates on a hook-and-loop sanding pad system, simplifying the sanding paper replacements, thus improving productivity. With a variable speed setting, users can adjust the sanding speed to suit different materials and projects.

Lastly, the Harbor Freight 90860 is a Digital Multimeter, an essential tool for any electrical job. Measuring voltage, current, and resistance, this versatile device simplifies complex troubleshooting tasks. Its large digital display ensures easy reading of measurements, and it includes an auto-ranging capability for straightforward operation. With features such as a data hold function and a built-in flashlight, this multimeter is perfect for both professional electricians and home DIYers.

In summary, models 91013, 90717, 4815, and 90860 from Harbor Freight Tools exemplify the brand's commitment to quality, safety, and user-friendly design. Whether for automotive care, cleaning, woodworking, or electrical work, these tools serve to enhance efficiency and deliver reliable performance in a variety of applications.