DOUBT, Test with a Voltmeter | Harbor Freight Tools 90717, 90860

3.To secure the two angle brackets to the mounting surface, drill two 1/4” holes though the base of each angle bracket. Then, drill four 1/4” holes, appropriately spaced, through the mounting surface. Use four screws, lock-washers, and nuts (not provided). (See

Figure C.)

SCREW

(NOT PROVIDED)

NUT

(NOT PROVIDED)

ANGLE BRACKET (NOT PROVIDED)

LOCK WASHER (NOT PROVIDED)

MOUNTING SURFACE

(SIDE VIEW)

FIGURE C

To Connect The Solar Panel To The Charge Controller:

Note: An appropriate charge controller must be used to prevent overcharging, damage to the battery, and other problems-see warning 8 on page 4 for details.

1.CAUTION: Do not cross electrical polarity, as product damage and/or personal injury may occur. The Solar Panel junction box contains a terminal strip with two active positions. The terminal with the RED lead attached is “POSITIVE”. The terminal with the BLACK or BLUE lead attached is “NEGATIVE”. WHEN IN

DOUBT, TEST WITH A VOLTMETER.

2.Typical connection instructions. ALWAYS refer to the manual for the charge controller that you will use for correct procedures.

a.To connect the two leads from one Solar Panel to the charge controller (not provided) to get 12 Volt output, see Figure D on page 7.

b.To connect the two leads from multiple Solar Panels to the charge controller to get 12 Volt output, see Figure E on page 8.

c.To connect the two leads from two Solar Panels to the charge controller to get 24 Volt output, see Figure F on page 8.

3.Once the two leads are completely connected to the charge connector, refer to the “Specifications” section of this manual to determine the charging time required for the specific model of Solar Panel you are using.

SKUs 04815, 91013, 90860, & 90717

Page 6

4815, 90717, 91013, 90860 specifications

Harbor Freight Tools is known for its vast selection of tools and accessories, offering various products suitable for both DIY enthusiasts and professional contractors. Among their many offerings, the tools identified by model numbers 91013, 90717, 4815, and 90860 stand out for their performance and affordability, catering to a wide range of needs in various applications.

The Harbor Freight Tools 91013 is a 3-Ton Heavy Duty Floor Jack designed for efficiency and safety. Its low-profile design makes it ideal for sports cars and lowered vehicles, allowing mechanics easy access to perform maintenance tasks. With a capacity of up to three tons, it ensures the ability to lift heavy vehicles, and its dual pump system enables quick lifting, saving valuable time. The built-in safety features, including a rubber pad and a safety valve, provide sturdy support and enhance user protection during operations.

The 90717 model is a 12-Volt Car Vacuum designed for quick clean-ups in vehicles. This compact and lightweight model features a powerful motor that efficiently removes dirt and debris from car interiors. With its 16-foot power cord, the vacuum allows users to reach every corner of their vehicle with ease. It comes with a variety of attachments, enabling users to tackle different cleaning tasks, such as reaching tight spaces or cleaning upholstery.

Model 4815 is a 5-Inch Random Orbit Palm Sander, perfect for achieving a smooth finish on various surfaces. This palm sander combines power and ergonomics, featuring a low vibration design that allows for longer usage without fatigue. It operates on a hook-and-loop sanding pad system, simplifying the sanding paper replacements, thus improving productivity. With a variable speed setting, users can adjust the sanding speed to suit different materials and projects.

Lastly, the Harbor Freight 90860 is a Digital Multimeter, an essential tool for any electrical job. Measuring voltage, current, and resistance, this versatile device simplifies complex troubleshooting tasks. Its large digital display ensures easy reading of measurements, and it includes an auto-ranging capability for straightforward operation. With features such as a data hold function and a built-in flashlight, this multimeter is perfect for both professional electricians and home DIYers.

In summary, models 91013, 90717, 4815, and 90860 from Harbor Freight Tools exemplify the brand's commitment to quality, safety, and user-friendly design. Whether for automotive care, cleaning, woodworking, or electrical work, these tools serve to enhance efficiency and deliver reliable performance in a variety of applications.