Meade RCX400TM Identify, To Select a landmark from the database, To perform a Landmark Survey

Page 40

those in the Landmark database. Be sure to change this option back to "Astronomical" when you wish to view celestial objects again.

3.Press MODE once. "Select Item: Setup" displays.

4.Press the Scroll Down key once and "Select Item: Object" displays. Press

ENTER. "Object: Solar System" displays.

5.Press the Scroll Up key twice and "Object: Landmarks" displays. Press ENTER.

"Landmark: Select" displays.

6.Press the Scroll Down key once. "Landmark: Add" displays. Press ENTER.

7."Landmark Name" displays. Using Arrow keys, enter a name for the landmark you wish to add to the database. When finished, press ENTER.

8."Center Landmark. Press Enter" displays. Using only the Arrow keys (do not man- ually move the telescope), move the telescope to the desired landmark and cen- ter the object in the eyepiece. Press ENTER. The object is now stored in memo- ry.

9."Landmark: Add" displays. If you wish to add more landmarks, repeat steps 5 through 8.

To Select a landmark from the database:

1.Make sure the telescope is located and aligned exactly as when the desired land- mark was entered into memory.

2.Display the "Landmark: Select" menu option. Press ENTER.

3.Use the Scroll keys to scroll through the list of objects you have previously entered. When the desired object displays, press ENTER to select the object.

Use the Scroll keys to scroll through location information about the object, if desired. Press GO TO to slew the telescope to the landmark.

4.Press MODE to exit.

To perform a Landmark Survey:

This procedure allows you to perform a tour of the objects entered in the "Object: Landmark" menu option—note that the Landmark Survey will function only if you have previously entered objects in the Landmark menu.

1.Navigate to "Utilities: Landmark Survey" menu and press ENTER.

2."Landmark Survey: Slewing..." displays. The telescope moves to the first object on the Survey list and displays the name of the object.

3.Press MODE to stop the Survey. Press ENTER to restart the survey at the first object of the survey.

To check on the available amount of memory in Autostar II:

Autostar II has a limited amount of memory. Once you begin to store Landmarks, user objects and other bits of information in Autostar II, you will begin to use up memory. This procedure allows you to check on how much memory is still available.

1.Navigate to the "Setup: Statistics" menu option and press ENTER.

2."Statistics: 37.2K Char. Free" displays. This is the amount of memory that is still available to the user.

Identify

This procedure allows you to use Autostar II to identify objects you have found in the night sky using the Arrow keys. If the object is not in Autostar II's database, Autostar

IIdisplays information about an object in its database that is closest to the one you queried about.

Important Note: For this function to operate properly, you must first ini- tialize and align Autostar II. If you physically move the telescope after ini- tialization, this function will fail to operate properly.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents
MEADE.COM Focusing the Telescope How to Hot Swap the Autostar II HandboxContents Tighten the adjustment lock Attach the legs of the tripod to the baseRotate the leg Hook the Release PinInstall the batteries Position the mount over the tripodSecure the mount with the T-handle Move the optical tube from its shipping positionAttach the visual back and diagonal mirror Insert the eyepiece and remove dust coverPlug in the AutoStar II handbox Turn on AutoStarTo exit the focus operation 1. Press Mode Point and Observe Tighten the R.A. and Dec. LocksTelescope Features FanViewfinder close up RCX400 Your Personal Window to the Universe Base Computer Control Panel see jDefinitions Viewfinder Tour the Cosmos with Just the Push of a Button Autostar II FeaturesLibrary # of Objects About changing slew RCX400 Tips Parts Listing How to Assemble the TripodHow to Assemble Your Telescope Getting StartedTo attach AutoStar II and connect the handbox holder To attach the diagonal mirror and the eyepieceMounting and Focusing the Viewfinder for the First Time Aligning the ViewfinderPresets ObservingChoosing an Eyepiece To focus the telescope eyepieceTo define a preset To select a previously defined focus presetTo sync on a focus preset Observing by Moving the Telescope ManuallyTerrestrial Observing Observing Using Autostar IIs Arrow KeysSlew Speeds Observe the Moon Astronomical ObservingTo Track an Object Automatically Moving Through Autostar II’s MenusWhich One’s the Alignment Star? Using the Guided Tour Observe a Star using the Automatic Tracking FeatureGo To Saturn RCX400 Info Autostar II Navigation Exercise Basic AutostarTo Calculate Sunset time Example of Locating a menu Navigating AutostarAutostar Select Item ObjectObject Menu To slew the telescope to catalog objectsEvent Menu DefinitionGlossary Menu Utilities MenuSetup Menu Look into the FuturePage Adding and editing sites? Setup Menu Daylight SAVING, Hot Button Menus To Add a Site to the user-defined site list Adding Observing SitesTo Edit a Site Creating User Objects To GO to a user-entered objectLandmarks Observing SatellitesTo Add a landmark to the database Identify To Select a landmark from the databaseTo perform a Landmark Survey To check on the available amount of memory in AutostarBrowse Displayed information ExampleHow to perform the Easy Align Procedure Alternate Alt/Az AlignmentsInitialize Autostar Easy Two-Star AlignmentTo Download the Latest Version of Autostar II Software One-Star Alt/Az AlignmentTo Set the Home Position Manually Periodic Error Correction Update Menu OptionTrain Menu Option Erase Menu OptionPhotography Few tips on photography with the RCX400 telescopesPhotography with a Digital Camera Photography with Meade’s AutoStar SuiteImage of M13 captured with the Deep Sky Imager Optional Accessories Meade Series 4000 EyepiecesSeries 4000 8 24mm Zoom Eyepiece Star Charts Collimation MaintenanceTest your Collimation Follow these steps for collimation of the optical system Defocused star images. Misaligned 1, 2, AlignedInspecting the Optics Meade Customer ServiceGauging the Movement of the Telescope 10 f/8 RCX400 Specifications 12 f/8 RCX400 Specifications14 f/8 RCX400 Specifications Advanced Autostar II System Specifications Autostar II Handbox SpecificationsEquatorial Alignment Setting CirclesCelestial Coordinates Declination Setting Circle Equatorial WedgeLining Up with the Celestial Pole Locating PolarisPrecise Polar Alignment RCX400 mounted on an equatorial wedgeAutostar II Polar Alignment Easy Polar AlignmentOne-Star Polar Alignment Two-Star Polar AlignmentAppendix B Latitude Chart Latitude Chart for Major Cities of the WorldCity State/Prov./Country Latitude City Country LatitudeCommand Line What you will needTour Modes Comment LineWriting a Tour TitlePick ONE / Pick END Pick END Auto Slew on / Auto Slew OFF Downloading ToursAppendix D Training the Drive Further StudyTo observe the Apollo 15 landing site using the Moon option Appendix E the Moon MenuAppendix F IntroductionOperation TrainingUpdate Permanently Mounted ScopesOther Menus Options Save As and Load OffBasic Astronomy Autostar II GlossaryObjects in Space MoonPlanets Deep-Sky ObjectsPage Meade Limited Warranty
Top Page Image Contents