Meade RCX400TM Permanently Mounted Scopes, Other Menus Options Save As and Load, Update, Off

Page 70

Permanently Mounted Scopes

For permanently mounted telescopes, it is not necessary to have more than one model unless the weight and balance of auxiliary equipment introduces balance or flexure changes that significantly affect pointing. The best practice is to train the Smart Mount and then run a couple of sessions with Update enabled. Thereafter, simply leave Smart Mount On as the installation default.

Other Menus Options

Save As and Load

The Smart Mount system allows you to save several models you have created (see TRAINING on the previous page) using the Save As command. Choose which model will be the "Current Model” using the Load command.

Update

The Update mode allows you to update training for the current model you have enabled. You will sync on several stars as previously described, which will further refine the pointing of your telescope. Save your model after running in update mode, otherwise the update will be lost when the telescope is powered off.

On

Load a model from memory (see SAVE AS AND LOAD above) and then Select Smart On. When Smart Mount is "On," the telescope will use the currently loaded model to refine your telescope's pointing, but will not update the model (see SMART MOUNT UPDATE above). If Smart Mount was "On" when you last powered off your telescope, it will be "On" when you start the next session.

Off

When Smart Mount is "Off," the telescope will not use any model you have created to refine pointing accuracy.

Erase

The Erase command clears the Current Smart Mount table values to allow a new model to be created.

Delete

The Delete command allows you to delete any model from memory. To delete a model, just scroll through the names and select the model to you wish to delete and press ENTER.You will be asked to confirm your choice. Press ENTER again and it will be removed from memory.

70

Page 69 Page 71
Image 70
Page 69 Page 71
Contents MEADE.COM Focusing the Telescope How to Hot Swap the Autostar II HandboxContents Rotate the leg Tighten the adjustment lockAttach the legs of the tripod to the base Hook the Release PinSecure the mount with the T-handle Install the batteriesPosition the mount over the tripod Move the optical tube from its shipping positionPlug in the AutoStar II handbox Attach the visual back and diagonal mirrorInsert the eyepiece and remove dust cover Turn on AutoStarTo exit the focus operation 1. Press Mode Point and Observe Tighten the R.A. and Dec. LocksTelescope Features FanViewfinder close up RCX400 Your Personal Window to the Universe Base Computer Control Panel see jDefinitions Viewfinder Tour the Cosmos with Just the Push of a Button Autostar II FeaturesLibrary # of Objects About changing slew RCX400 Tips How to Assemble Your Telescope Parts ListingHow to Assemble the Tripod Getting StartedTo attach AutoStar II and connect the handbox holder To attach the diagonal mirror and the eyepieceMounting and Focusing the Viewfinder for the First Time Aligning the ViewfinderChoosing an Eyepiece PresetsObserving To focus the telescope eyepieceTo sync on a focus preset To define a presetTo select a previously defined focus preset Observing by Moving the Telescope ManuallyTerrestrial Observing Observing Using Autostar IIs Arrow KeysSlew Speeds To Track an Object Automatically Observe the MoonAstronomical Observing Moving Through Autostar II’s MenusWhich One’s the Alignment Star? Using the Guided Tour Observe a Star using the Automatic Tracking FeatureGo To Saturn RCX400 Info Autostar II Navigation Exercise Basic AutostarTo Calculate Sunset time Example of Locating a menu Navigating AutostarAutostar Select Item ObjectObject Menu To slew the telescope to catalog objectsEvent Menu DefinitionGlossary Menu Utilities MenuSetup Menu Look into the FuturePage Adding and editing sites? Setup Menu Daylight SAVING, Hot Button Menus To Add a Site to the user-defined site list Adding Observing SitesTo Edit a Site Creating User Objects To GO to a user-entered objectLandmarks Observing SatellitesTo Add a landmark to the database To perform a Landmark Survey IdentifyTo Select a landmark from the database To check on the available amount of memory in AutostarBrowse Displayed information ExampleInitialize Autostar How to perform the Easy Align ProcedureAlternate Alt/Az Alignments Easy Two-Star AlignmentTo Download the Latest Version of Autostar II Software One-Star Alt/Az AlignmentTo Set the Home Position Manually Train Menu Option Periodic Error CorrectionUpdate Menu Option Erase Menu OptionPhotography Few tips on photography with the RCX400 telescopesPhotography with a Digital Camera Photography with Meade’s AutoStar SuiteImage of M13 captured with the Deep Sky Imager Optional Accessories Meade Series 4000 EyepiecesSeries 4000 8 24mm Zoom Eyepiece Star Charts Collimation MaintenanceTest your Collimation Follow these steps for collimation of the optical system Defocused star images. Misaligned 1, 2, AlignedInspecting the Optics Meade Customer ServiceGauging the Movement of the Telescope 10 f/8 RCX400 Specifications 12 f/8 RCX400 Specifications14 f/8 RCX400 Specifications Advanced Autostar II System Specifications Autostar II Handbox SpecificationsEquatorial Alignment Setting CirclesCelestial Coordinates Declination Setting Circle Equatorial WedgeLining Up with the Celestial Pole Locating PolarisPrecise Polar Alignment RCX400 mounted on an equatorial wedgeOne-Star Polar Alignment Autostar II Polar AlignmentEasy Polar Alignment Two-Star Polar AlignmentCity State/Prov./Country Latitude Appendix B Latitude ChartLatitude Chart for Major Cities of the World City Country LatitudeTour Modes Command LineWhat you will need Comment LineWriting a Tour TitlePick ONE / Pick END Pick END Auto Slew on / Auto Slew OFF Downloading ToursAppendix D Training the Drive Further StudyTo observe the Apollo 15 landing site using the Moon option Appendix E the Moon MenuOperation Appendix FIntroduction TrainingOther Menus Options Save As and Load UpdatePermanently Mounted Scopes OffObjects in Space Basic AstronomyAutostar II Glossary MoonPlanets Deep-Sky ObjectsPage Meade Limited Warranty

RCX400TM specifications

The Meade RCX400TM is a sophisticated telescope designed for serious astronomers and astrophotographers seeking exceptional performance and innovative features. Combining advanced optics with user-friendly technology, the RCX400TM stands out as a powerful tool for both amateur and experienced stargazers.

At the heart of the RCX400TM is its revolutionary Ritchey-Chrétien optical design. This design minimizes optical aberrations, resulting in sharp, high-contrast images across the field of view. The telescope features a large aperture, typically around 10 inches, which allows for the observation of faint celestial objects, including distant galaxies, star clusters, and nebulae. The high-quality optics ensure that users can capture stunning details and nuances of their targets.

One of the standout characteristics of the RCX400TM is its advanced AutoAlign technology. This feature simplifies the setup process by automatically aligning the telescope to the night sky, enabling users to start observing in a matter of minutes. This is particularly beneficial for beginners or those who prefer a hassle-free experience when setting up for observations.

Additionally, the telescope is equipped with the Meade Smart Drive system, which enhances tracking accuracy and allows for long exposure astrophotography without the worry of trailing or blurring. This system compensates for periodic errors and undergoes continuous monitoring, ensuring that the telescope maintains precise alignment while tracking celestial objects.

The RCX400TM also incorporates an intuitive user interface with a large, easy-to-read LCD display. This interface allows users to access a comprehensive database of celestial objects, making it simple to locate and observe a wide range of astronomical phenomena. With its compatibility with various Meade accessories, such as cameras and filters, the RCX400TM provides flexibility for users looking to expand their astrophotography capabilities.

Durability is another significant aspect of the RCX400TM. Its robust construction ensures that it can withstand various outdoor conditions, making it suitable for both backyard observations and expeditions to remote dark sites.

In summary, the Meade RCX400TM is designed for those who demand high-performance optics, advanced technology, and ease of use. With features like the Ritchey-Chrétien optical design, AutoAlign technology, and the Smart Drive system, it offers a remarkable viewing experience that brings the wonders of the universe closer to all who gaze through its eyepiece. Whether for casual observation or serious astrophotography, the RCX400TM is poised to satisfy the needs of astronomy enthusiasts worldwide.
Top Page Image Contents