Meade RCX400TM instruction manual Appendix F, Introduction, Operation, Training

Page 69

Want to learn more about Alignment? See page 22.

Want to learn more about training your drive? See page 67.

APPENDIX F:

Smart Mount

Introduction

Smart Mount improves the pointing accuracy of your RCX400 telescope's "Go to" sys- tem. Despite careful efforts to calibrate and align telescopes, they may fail to precisely center objects. Smart Mount allows your telescope to learn about, and then correct for, any systematic pointing errors, regardless of the cause.

Because training your mount takes some time, we recommend that it be primarily used on permanently mounted instruments or when imaging requires very accurate pointing. Once Smart Mount training has been performed, the scope will benefit from it so long as you carefully park the telescope at the end of each session and do not modify the mounting.

For portable instruments, we recommend training Smart Mount each time you set up your telescope to insure best results.

We recommend that you use an illuminated reticle during the training procedure. An illuminated reticle allows you to precisely center celestial objects in a telescope’s eyepiece. The more precisely you center objects during Smart Mount training, the more pointing precision your telescope will be able to achieve. If you do not have an illuminated reticle, see OPTIONAL ACCESSORIES, pages 48 - 50 for more information.

Operation

The Smart Mount feature is located in the Autostar II Setup menu.

In order to use Smart Mount, create a model that allows Smart Mount to improve your telescope's accuracy. This is normally done by training Smart Mount. Once training has been completed, you will save your model. Autostar II allows you to save several models under different names. This allows you to, for example, save one model for a heavy imaging camera configuration on a permanently aligned scope, and another when you have a lighter load on the mount.

Training

In order to obtain solid, repeatable results, perform the following procedures before you create a model:

•Setup and align your telescope.

•Perform both RA/Az and Dec/Alt drive training calibration.

Once you have calibrated and aligned your telescope, if you wish to start a new model, go to the Smart Mount main menu. Locate and select "Erase" to clear the current model. Next, proceed with the steps below:

Note: If you do not erase the current model, the training session will refine the current model.

•Locate “Train” in the Smart Mount Configuration menu and press enter.

•The telescope will select and slew to several (over 40) stars.

•When requested to do so, carefully center each star and then press ENTER.

If you find that you cannot see a star because there is an obstruction blocking your view:

•Press MODE briefly to skip this star. Another star will be chosen.

To exit the training sequence before it is completed:

•Press and hold MODE for about two seconds and then release it.

When you have completed training:

•Save your model, using a good, descriptive name, using the “Save As” menu. Upon completion of the training, Smart Mount is enabled and remains on until you choose “Off” from the Smart Mount Configuration menu.

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents MEADE.COM How to Hot Swap the Autostar II Handbox Focusing the TelescopeContents Attach the legs of the tripod to the base Tighten the adjustment lockRotate the leg Hook the Release PinPosition the mount over the tripod Install the batteriesSecure the mount with the T-handle Move the optical tube from its shipping positionInsert the eyepiece and remove dust cover Attach the visual back and diagonal mirrorPlug in the AutoStar II handbox Turn on AutoStarTighten the R.A. and Dec. Locks To exit the focus operation 1. Press Mode Point and ObserveFan Telescope FeaturesViewfinder close up Base Computer Control Panel see j RCX400 Your Personal Window to the UniverseDefinitions Viewfinder Autostar II Features Tour the Cosmos with Just the Push of a ButtonLibrary # of Objects About changing slew RCX400 Tips How to Assemble the Tripod Parts ListingHow to Assemble Your Telescope Getting StartedTo attach the diagonal mirror and the eyepiece To attach AutoStar II and connect the handbox holderAligning the Viewfinder Mounting and Focusing the Viewfinder for the First TimeObserving PresetsChoosing an Eyepiece To focus the telescope eyepieceTo select a previously defined focus preset To define a presetTo sync on a focus preset Observing by Moving the Telescope ManuallyObserving Using Autostar IIs Arrow Keys Terrestrial ObservingSlew Speeds Astronomical Observing Observe the MoonTo Track an Object Automatically Moving Through Autostar II’s MenusWhich One’s the Alignment Star? Observe a Star using the Automatic Tracking Feature Using the Guided TourGo To Saturn RCX400 Info Basic Autostar Autostar II Navigation ExerciseTo Calculate Sunset time Navigating Autostar Example of Locating a menuSelect Item Object AutostarTo slew the telescope to catalog objects Object MenuDefinition Event MenuUtilities Menu Glossary MenuLook into the Future Setup MenuPage Adding and editing sites? Setup Menu Daylight SAVING, Hot Button Menus Adding Observing Sites To Add a Site to the user-defined site listTo Edit a Site To GO to a user-entered object Creating User ObjectsObserving Satellites LandmarksTo Add a landmark to the database To Select a landmark from the database IdentifyTo perform a Landmark Survey To check on the available amount of memory in AutostarDisplayed information Example BrowseAlternate Alt/Az Alignments How to perform the Easy Align ProcedureInitialize Autostar Easy Two-Star AlignmentOne-Star Alt/Az Alignment To Download the Latest Version of Autostar II SoftwareTo Set the Home Position Manually Update Menu Option Periodic Error CorrectionTrain Menu Option Erase Menu OptionFew tips on photography with the RCX400 telescopes PhotographyPhotography with Meade’s AutoStar Suite Photography with a Digital CameraImage of M13 captured with the Deep Sky Imager Meade Series 4000 Eyepieces Optional AccessoriesSeries 4000 8 24mm Zoom Eyepiece Star Charts Maintenance CollimationTest your Collimation Defocused star images. Misaligned 1, 2, Aligned Follow these steps for collimation of the optical systemMeade Customer Service Inspecting the OpticsGauging the Movement of the Telescope 12 f/8 RCX400 Specifications 10 f/8 RCX400 Specifications14 f/8 RCX400 Specifications Autostar II Handbox Specifications Advanced Autostar II System SpecificationsSetting Circles Equatorial AlignmentCelestial Coordinates Equatorial Wedge Declination Setting CircleLocating Polaris Lining Up with the Celestial PoleRCX400 mounted on an equatorial wedge Precise Polar AlignmentEasy Polar Alignment Autostar II Polar AlignmentOne-Star Polar Alignment Two-Star Polar AlignmentLatitude Chart for Major Cities of the World Appendix B Latitude ChartCity State/Prov./Country Latitude City Country LatitudeWhat you will need Command LineTour Modes Comment LineTitle Writing a TourPick ONE / Pick END Downloading Tours Pick END Auto Slew on / Auto Slew OFFFurther Study Appendix D Training the DriveAppendix E the Moon Menu To observe the Apollo 15 landing site using the Moon optionIntroduction Appendix FOperation TrainingPermanently Mounted Scopes UpdateOther Menus Options Save As and Load OffAutostar II Glossary Basic AstronomyObjects in Space MoonDeep-Sky Objects PlanetsPage Meade Limited Warranty

RCX400TM specifications

The Meade RCX400TM is a sophisticated telescope designed for serious astronomers and astrophotographers seeking exceptional performance and innovative features. Combining advanced optics with user-friendly technology, the RCX400TM stands out as a powerful tool for both amateur and experienced stargazers.

At the heart of the RCX400TM is its revolutionary Ritchey-Chrétien optical design. This design minimizes optical aberrations, resulting in sharp, high-contrast images across the field of view. The telescope features a large aperture, typically around 10 inches, which allows for the observation of faint celestial objects, including distant galaxies, star clusters, and nebulae. The high-quality optics ensure that users can capture stunning details and nuances of their targets.

One of the standout characteristics of the RCX400TM is its advanced AutoAlign technology. This feature simplifies the setup process by automatically aligning the telescope to the night sky, enabling users to start observing in a matter of minutes. This is particularly beneficial for beginners or those who prefer a hassle-free experience when setting up for observations.

Additionally, the telescope is equipped with the Meade Smart Drive system, which enhances tracking accuracy and allows for long exposure astrophotography without the worry of trailing or blurring. This system compensates for periodic errors and undergoes continuous monitoring, ensuring that the telescope maintains precise alignment while tracking celestial objects.

The RCX400TM also incorporates an intuitive user interface with a large, easy-to-read LCD display. This interface allows users to access a comprehensive database of celestial objects, making it simple to locate and observe a wide range of astronomical phenomena. With its compatibility with various Meade accessories, such as cameras and filters, the RCX400TM provides flexibility for users looking to expand their astrophotography capabilities.

Durability is another significant aspect of the RCX400TM. Its robust construction ensures that it can withstand various outdoor conditions, making it suitable for both backyard observations and expeditions to remote dark sites.

In summary, the Meade RCX400TM is designed for those who demand high-performance optics, advanced technology, and ease of use. With features like the Ritchey-Chrétien optical design, AutoAlign technology, and the Smart Drive system, it offers a remarkable viewing experience that brings the wonders of the universe closer to all who gaze through its eyepiece. Whether for casual observation or serious astrophotography, the RCX400TM is poised to satisfy the needs of astronomy enthusiasts worldwide.
Top Page Image Contents