Bushnell Model 78-9570 manual Plastic Insert

Please find below an image depicting how to attach the red dot finderscope and an image

depicting a fully-attached unit.

How-To-Attach: Place Finderscope Cylindrical Groove over Cylindrical Finderscope Mount

Post until it clicks into place.

Plastic Insert

Adjustment

Wheels

Aligning and Using Red Dot Finderscope

Remove plastic insert on bottom side of finderscope to allow battery to make connection with

battery contact for power. Turn power switch on.

Look through main telescope tube at low power and establish a well-defined stationary target. Looking through red dot finderscope, alternate tightening each adjustment wheel (at rear and left side of finderscope) until the red dot of finderscope is precisely aligned and centered on the same object being viewed in main telescope tube.