2.SELF DIAGNOSTIC FUNCTION WITH REMOTE CONTROLLER (WIRED REMOTE CONTROLLER)

2-1 When malfunction occurs during operation

When a malfunction occurs, the indoor and outdoor units stop and the malfunction is displayed on the LCD of the remote controller.

(1) ON the set temperature display part, “CHECK” appears, and the unit

CHECK mode

address and the check code are displayed alternately at one-second intervals. (Check mode)

Example

Check Unit code address

(2)When one remote controller controls several units in the group con- trol, the LCD shows the unit address and check code of the first mal- functioning unit.

(3)To cancel the check mode, press the ON/OFF button. In remote ON/OFF control, press the remote ON/OFF switch. In centralize control, turn OFF the ON/OFF button of centralize controller.

MODE

TIMER ON/OFF

CLOCK/TIMER FAN SPEED

AIR DISCHARGE FILTER

 

 

 

AIR SWEEP CHECK

 

SET TEMP.

TIMER SET

TEST RUN

REMOTE CONTROLLER

 

 

 

PAR-JH24KUS

 

 

 

Check button

NOTE: The latest check code is memorize, even if the check mode is cancelled by the way mentioned above. It takes 60 seconds maximum to display the memorize check code.

2-2 How to use the self diagnostic function for service

A. For normal control with one unit and one remote controller

(1)Pressing the CHECK button on the remote controller twice starts the self diagnostic function.

(2)During the self diagnostic function, “CHECK MODE” appears at two positions on the remote controller display. Then, at least 10 seconds later, the unit address and the check code is alternately displayed at one-second intervals.

(3)Check and repair the unit according to the check code. (Refer to page 45.)

B. For group control using one remote controller

(1)Pressing the CHECK button on the remote controller twice starts the self diagnostic function.

(2)Press the SET TEMP. button or SET TEMP. button on the remote controller to advance or go back to the

unit address. Each time SET TEMP. button is pressed, the unit address advances by one. Each time SET TEMP. button is pressed, the unit address goes back by one.

The check code and the unit address, appear alternately.

(3)The check code “U8” means no malfunction has occurred since installation. The check code “E0” means the following conditions:

The unit address displayed on the remote controller does not apply to any unit.

power is not supplied to the unit.

Signal transmitting/receiving circuit is abnormal.

(4)Check and repair the unit according to the check code. (Refer to page 45.)

OC194-37

Page 37
Image 37
Mitsubishi Electronics PL36FK31, PL42FK21, PL30FK21, PL18FK21 OC194-37, When malfunction occurs during operation, Check mode

PL18FK21, PL30FK21, PL12FK1, PL36FK31, PL24FK21 specifications

Mitsubishi Electronics has long been recognized for its commitment to quality and innovation in the field of air conditioning systems. Among its impressive lineup, the models PL42FK21, PL24FK21, PL36FK31, PL12FK1, and PL30FK21 stand out for their advanced features, efficiency, and user-friendly designs.

The PL42FK21 is designed to deliver superior cooling and heating performance, making it suitable for larger spaces. With its high energy efficiency rating, it minimizes energy consumption while providing optimal comfort. This model is equipped with advanced inverter technology that regulates the compressor speed, ensuring the desired temperature is maintained without unnecessary fluctuations in power usage.

Next, the PL24FK21 offers similar efficiencies while accommodating medium-sized spaces. This model incorporates a streamlined design that blends with any interior, while its quiet operation ensures that it does not disrupt daily activities. Moreover, the model features a programmable timer and remote control, enhancing user convenience and comfort.

The PL36FK31 is another model that brings forth powerful performance, ideal for commercial applications or larger residential installations. It boasts superior airflow distribution, ensuring even cooling or heating throughout the desired area. The addition of a high-performance filter system helps to purify the air, making it a healthy option for families and workplaces alike.

For those seeking a compact solution, the PL12FK1 is a standout choice. This model excels in efficiency while maintaining a small footprint, making it perfect for apartments or smaller rooms. With its energy-saving capabilities and modern design, this unit combines functionality and style seamlessly.

Finally, the PL30FK21 balances performance with affordability. This model comes with a host of features, including an eco-friendly refrigerant that minimizes environmental impact. It also incorporates smart controls that enable users to manage their settings via mobile apps, adding a level of modern convenience that many consumers desire.

Each of these Mitsubishi models is built with durability in mind, ensuring they can withstand the rigors of daily use. Additionally, Mitsubishi Electronics provides exceptional customer support and warranty options, reflecting their commitment to customer satisfaction.

In summary, the PL42FK21, PL24FK21, PL36FK31, PL12FK1, and PL30FK21 from Mitsubishi Electronics exemplify the brand's dedication to innovation, efficiency, and user-friendliness in air conditioning technology. These models cater to a variety of spaces and user needs, making them a reliable choice for both residential and commercial applications.