OC194-4

3PART NAMES AND FUNCTIONS

Remote controller operation buttons

TIMER OFF TIMER
CHECK SET TEMP.
DRY COOL
FAN
CLOCK AUTO AUTO
START STOP
MODE TIMER ON/OFFCLOCK/TIMER FAN SPEED AIR DISCHARGEFILTER
CHECK
TEST RUN
AIR SWEEP
SET TEMP. TIMER SET
F
FAN
SPEED
SWING
REMOTE CONTROLLER
PAR-JC240KUS
AUTO
RETURN
FILTER button
This resets the filter service indica-
tion display.
TIMER ON/OFF button
This switches between continuous
operation and the timer operation.
SET TEMPERATURE
button
This sets the room temperature.
The temperature setting can be per-
formed in 2-F units.
Setting range :
Cooling 65-F to 87-F
CLOCK/TIMER button
This sets or switches the current
time,start time and stop time.
FAN SPEED button
This sets the fan speed.
AIR DISCHARGE
button
This adjusts the vertical angle of the
ventilation.
ON/OFF button
This switches between the opera-
tion and stop modes each time it is
press. The lamp on this button
lights during operation.
OPERATION MODE
button
Press this button to switch the cool-
ing, electronic dry (Dehumidify),fan
modes.

Remote controller

Once the controls are set, the same operation mode can be repeated by simply pressing the

ON / OFF button.

CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.
AIR SWEEP button
This switches the horizontal fan motion
(Swing louver) ON and OFF.
(This button does not operate in this
models.)