Tascam CD-302 owner manual Advanced Operations-Sampling

Page 21

4 • Advanced Operations—Sampling

The points marking the start and the end of the sam- ple must be within 10 seconds of each other, and must be in the same track.

NOTE

If the scratch function (4.9, “Scratch”) is on, you can- not use the sampling function.

4.3.1Sampling

1Make sure the IN and OUT keys U are not lit.

2Erase any existing sample data (4.3.9, “Clear- ing the sampled data”).

3Locate to the location to be used as the start point of the sample (this can be done “on the fly” during playback).

4When you press the IN key, the current location is captured as the sample start point. The OUT and SAMPLE keys starts flashing as sampling starts.

The SAMPLE key will also flash if the unit is in playback mode to show that active sampling is taking place.

5Locate the playback position to the location to be used as the sample end point (or continue playback until the end point is reached).

6When you press the OUT key, the current posi- tion is captured as the loop point. If the start and end locations are different, both the IN and OUT keys turn on.

NOTE

If ten seconds elapse, or if the end of the track is reached without you pressing the OUT key, the end point of the sample will automatically be set at this point.

4.3.3Editing the OUT point

You cannot edit the start point of the sample, but it is possible for you to adjust the end point to a position within 10 seconds of the start point.

1With both the IN and OUT keys lit, “double- click” (i.e. press twice in quick succession) the OUT key.

2The display shows the sampling time from the start point.

3Use the dial to adjust the position of the end point.

4Press the OUT key to store the new position of the end point.

4.3.4Playback of sampled data

When both the IN and OUT keys are lit, press the IN key to replay the sampled data.

If you press the OUT key while the sample is being played, you will stop the sample playback.

If you press the IN key while sampled data is played back, playback restarts from the beginning of the sampling data.

4.3.5Playback of sampled data in reverse

1Press and hold down the SAMPLE key.

2Press the IN key. The sample can now be played back in reverse.

3Press the PLAY/PAUSE key to start reversed playback.

There is also a preset function menu which allows all samples to be played back in reverse automatically:

4.3.2Using the A-B loop as a sample source

When you have set up an A-B loop (see 3.4.2, “A-B loop play mode”), you can press and hold the OUT key and press the B key (or the other way round) to set the A point of the loop as the start point of the sample, and the B point of the loop as the end point of the sample (you cannot do this when loop play- back is taking place).

If the A-B loop is over 10 seconds in length the first 10 seconds will be used as the sample.

1Press the PRESET key.

2Select 05 SAMP/P (SAMP_P) using the dial or numeric keys.

3Press the ENTER key.

4Select R (reverse) with the dial (the f—for- ward setting sets forward play).

5Press the ENTER key. The REVERSE indicator will light.

4.3.6Setting the sampled data playback tempo

1Press the PRESET key.

2Select 07 SAMP/t (SAMP_T) using the dial or numeric keys.

TASCAM CD-302 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents CD-302 Do not cut off the mains plug from this equipment Important Safety PrecautionsImportant Safety Instructions Pour le Canada For CanadaTascam CD-302 Table of Contents BPM Specifications and referenceMain features Before you startEnvironmental conditions Backup memory Before you start-Backup memoryAnti-shock memory Instant startPreset functions Before you start-Preset functionsDisplayed characters Before you start-Displayed charactersFront and rear panels Front and rear panels-Main unit front panel Remote control unit front panelMain unit front panel Main unit rear panelFront and rear panels-Remote control unit front panel Remote control unit rear Front and rear panels-Remote control unit rearDisplay Front and rear panels-DisplayPlayback operations Basic operationsPlay modes CueingLoop play Basic operations-Loop playSetting A-B loop points B loop play modePlayback in A-B loop play mode Clearing loop pointsALL loop Single loopTempo speed control Advanced OperationsKey pitch control SamplingAdvanced Operations-Sampling Advanced Operations-Bend function BPMBend function Advanced Operations-Number key modes Cancellation of tempo syncNumber key modes Tempo SyncAdvanced Operations-Scratch Cancellation of beat syncScratch MemoriesAdvanced Operations-Memories Advanced Operations-Voice Reduce function Voice Reduce functionProgrammed playback Output level Advanced Operations-Output levelBrake function Deleting program stepsSetting the EOM time Advanced Operations-Setting the EOM timeTimer Play Auto ReadyAdvanced Operations-Relay Play Direct modeRelay Play Disc Tray Auto CloseFactory Preset Advanced Operations-Fader and Event Start/StopFader and Event Start/Stop Specifications and reference DimensionsSpecifications Specifications and reference-Error messages, etc Error messages, etcSpare parts

CD-302 specifications

The Tascam CD-302 is a professional-grade CD player that has been specifically designed for a variety of audio applications, including broadcasting, live sound, and studio work. Offering an impressive blend of advanced features and user-friendly operation, the CD-302 stands out in the crowded market of CD players.

One of the main features of the Tascam CD-302 is its robust build quality. Constructed with a durable chassis, it is designed to withstand the rigors of professional use while ensuring reliable performance. The front panel features an easy-to-navigate interface that includes a clear LCD display, giving users quick access to track information and playback status.

The CD-302 supports a wide range of audio formats, including standard audio CDs and CD-R/RW discs, making it versatile for various types of media. The player is equipped with an innovative anti-shock system to minimize interruptions during playback, ensuring smooth operation even in challenging environments.

Another significant aspect of the Tascam CD-302 is its dual stereo outputs, which provide flexible connectivity options. Users can output audio through balanced XLR connections or unbalanced RCA outputs, allowing for easy integration into different sound systems and setups. The addition of digital outputs, including coaxial and optical, further enhances its versatility for digital audio routing.

The CD-302 also features an intuitive cueing system, which allows for precise control over playback start points. This includes capabilities for seamless looping, pitch control, and variable speed playback, making it ideal for DJs and live performers who require flexibility in their sets.

Tascam has incorporated advanced technologies into the CD-302, including high-quality digital-to-analog converters (DACs) that ensure excellent audio fidelity. With a signal-to-noise ratio that exceeds industry standards, the player delivers crisp, clear sound across the frequency spectrum.

Moreover, the Tascam CD-302 is designed for easy maintenance and has a modular construction that allows for straightforward servicing when required. This reliability and ease of use make it a preferred choice for audio professionals who need equipment that they can depend on.

In conclusion, the Tascam CD-302 is more than just a standard CD player; it is an essential tool for audio professionals. With its robust features, exceptional build quality, and advanced playback technologies, the CD-302 offers everything needed for high-quality audio reproduction in various settings.
Top Page Image Contents