Tascam CD-302 owner manual Before you start-Backup memory, Anti-shock memory, Instant start

Page 8

1 • Before you start—Backup memory

1.2.1Beware of condensation

If the player (or a compact disc) is moved from a cold to a warm place, or used after a sudden tempera- ture change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the player for one or two hours with the power turned on, then turn the power off and on again.

1.2.2Never use a stabilizer

The TASCAM CD-302 has a stabilizer disc built into its drive mechanisms. Using commercially available CD stabilizers with this player will damage the mechanisms and cause them to malfunction.

NOTE

Never use a disc that has had a stabilizer mounted to it. The residual adhesive may cause the disc to stick to the mechanism of the TASCAM CD-302. If it sticks to the mechanism, you will need a technician to get it out.

•Wipe in a straight motion from the inside to the outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduc- tion quality.

•Never use such chemicals as record sprays, anti- static sprays or fluid, benzine or thinner to clean compact discs. Such chemicals will do irreparable damage to the disc’s plastic surface.

•Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to “skip”.

•Don’t expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperature can warp the disc.

•Only use circular compact discs. Avoid using non- circular promotional, etc. discs.

1.2.3Handling of discs

The unit has been designed specifically for reproduc-

tion of discs bearing the mark. No other discs can be reproduced.

Observe the following:

•Always place the compact discs in the trays with their label facing upward (compact discs can only be played on one side).

•To remove a disc from its storage case, press down on the center of the case, and lift the disc out, hold- ing it carefully by the edges.

•Finger marks and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike conventional records, the compact disc has no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles.

•To keep the laser pickups clean, don’t touch them. For the same reason, don’t leave the disc trays open unnecessarily.

1.3Backup memory

Each time you turn off the power, the status of the following features are stored into back up memory.

•Playback mode (Continue, Single, Program)

•Time mode (Elapsed, remain)

•Preset functions

•Contents of Program

•BANKs A through E

•TEMPO key ((%, 16%, 32%)

•INDEX (on/off)

•LOOP (on/off)

1.4Anti-shock memory

The CD-302 provides 10 seconds’ worth of anti- shock memory for each deck.

1.5Instant start

The CD-302 will start playing from pause mode immediately when the PLAY key is pressed, due to the antishock memory function.

8 TASCAM CD-302

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CD-302 Important Safety Precautions Do not cut off the mains plug from this equipmentImportant Safety Instructions For Canada Pour le CanadaTascam CD-302 Table of Contents Specifications and reference BPMEnvironmental conditions Main featuresBefore you start Before you start-Backup memory Backup memoryAnti-shock memory Instant startBefore you start-Preset functions Preset functionsBefore you start-Displayed characters Displayed charactersFront and rear panels Remote control unit front panel Front and rear panels-Main unit front panelMain unit front panel Main unit rear panelFront and rear panels-Remote control unit front panel Front and rear panels-Remote control unit rear Remote control unit rearFront and rear panels-Display DisplayBasic operations Playback operationsPlay modes CueingBasic operations-Loop play Loop playB loop play mode Setting A-B loop pointsPlayback in A-B loop play mode Clearing loop pointsSingle loop ALL loopAdvanced Operations Tempo speed controlKey pitch control SamplingAdvanced Operations-Sampling Bend function Advanced Operations-Bend functionBPM Cancellation of tempo sync Advanced Operations-Number key modesNumber key modes Tempo SyncCancellation of beat sync Advanced Operations-ScratchScratch MemoriesAdvanced Operations-Memories Programmed playback Advanced Operations-Voice Reduce functionVoice Reduce function Advanced Operations-Output level Output levelBrake function Deleting program stepsAdvanced Operations-Setting the EOM time Setting the EOM timeTimer Play Auto ReadyDirect mode Advanced Operations-Relay PlayRelay Play Disc Tray Auto CloseFader and Event Start/Stop Factory PresetAdvanced Operations-Fader and Event Start/Stop Specifications Specifications and referenceDimensions Spare parts Specifications and reference-Error messages, etcError messages, etc

CD-302 specifications

The Tascam CD-302 is a professional-grade CD player that has been specifically designed for a variety of audio applications, including broadcasting, live sound, and studio work. Offering an impressive blend of advanced features and user-friendly operation, the CD-302 stands out in the crowded market of CD players.

One of the main features of the Tascam CD-302 is its robust build quality. Constructed with a durable chassis, it is designed to withstand the rigors of professional use while ensuring reliable performance. The front panel features an easy-to-navigate interface that includes a clear LCD display, giving users quick access to track information and playback status.

The CD-302 supports a wide range of audio formats, including standard audio CDs and CD-R/RW discs, making it versatile for various types of media. The player is equipped with an innovative anti-shock system to minimize interruptions during playback, ensuring smooth operation even in challenging environments.

Another significant aspect of the Tascam CD-302 is its dual stereo outputs, which provide flexible connectivity options. Users can output audio through balanced XLR connections or unbalanced RCA outputs, allowing for easy integration into different sound systems and setups. The addition of digital outputs, including coaxial and optical, further enhances its versatility for digital audio routing.

The CD-302 also features an intuitive cueing system, which allows for precise control over playback start points. This includes capabilities for seamless looping, pitch control, and variable speed playback, making it ideal for DJs and live performers who require flexibility in their sets.

Tascam has incorporated advanced technologies into the CD-302, including high-quality digital-to-analog converters (DACs) that ensure excellent audio fidelity. With a signal-to-noise ratio that exceeds industry standards, the player delivers crisp, clear sound across the frequency spectrum.

Moreover, the Tascam CD-302 is designed for easy maintenance and has a modular construction that allows for straightforward servicing when required. This reliability and ease of use make it a preferred choice for audio professionals who need equipment that they can depend on.

In conclusion, the Tascam CD-302 is more than just a standard CD player; it is an essential tool for audio professionals. With its robust features, exceptional build quality, and advanced playback technologies, the CD-302 offers everything needed for high-quality audio reproduction in various settings.
Top Page Image Contents