Tascam CD-302 owner manual Front and rear panels-Remote control unit front panel

Page 13

2 • Front and rear panels—Remote control unit (front panel)

D CUE key

If a cue point has been stored, the unit will play when the CUE key is pressed, and enter pause mode when this key is released.

M BPM counter

Shows the tempo (in bpm—beats per minute—from 81 to 161) of the current track, or of the tapped tempo input with the TAP key N (see 4.5, “BPM”).

E PLAY/PAUSE key

Changes between playback and pause mode.

The key lights steadily in playback mode, and flashes in pause mode.

If the ENTER key L is pressed and held down, and the PLAY key is pressed at the same time, a “cross play” function is enabled where the deck whose PLAY key is not pressed will stop playback, and the deck whose PLAY key has been pressed will start playback.

F JOG dial

Use this to advance or retard the playback position at a maximum resolution of 1 frame. The resolution can be set using the procedure described in 3.3.3, “Cue- ing using the JOG dial”.

This dial is also used for setting parameter values, etc. as explained elsewhere in this manual (3, “Basic operations” and 4, “Advanced Operations”).

G Number keys and CLEAR key

Use these number keys for direct entry of numerical values such as direct track search, time search, preset function recall, memory storage, etc.

Use the CLEAR key to reset numeric values.

When the CLEAR key is pressed and held down and the 0 key is pressed, the number keys take on special functions, as explained in 4.6, “Number key modes”.

H BANK key

Use to select between the five memory banks.

I PRESET key

Allows the recall of preset functions (see 4, “Advanced Operations”).

J MEMORY key

Memorizes the current settings.

K RECALL key

Recalls the memories.

L ENTER key

Confirms memory numbers, recall of memories and preset function settings.

N TAP key

Set the tempo in bpm manually by tapping the TAP key.

When you press this TAP key, the BPM counter M mode changes to the TAP mode and the TAP LED (to the left of the BPM counter) lights.

You can then adjust the tempo later using the dial F.

Pressing and holding this key for more than 2 sec- onds resets the value.

Pressing and holding this key and the BPM key together allows the value to be adjusted using the dial.

O BPM key

Selects either the automatic or tap BPM counter mode.

Clear the tempo by pressing and holding down this key for more than 2 seconds.

P TEMPO SYNC key

Turns the tempo sync function on and off. When this function is on, the key lights up. The tempo sync function allows the playback tempo of the two decks to be synchronized (see 4.7, “Tempo Sync”).

Pressing this key will adjust the tempo of the deck to the tempo of the material being played on the other deck.

While the deck is “locking up”, the TEMPO SYNC key flashes, and when the sync is locked, the light lights steadily.

Q BEAT SYNC key

Turns the beat sync function on and off. The beat sync function synchronizes the playback of the decks, so that the beats in the material are synchro- nized with the beats in the material played back by the other deck (see 4.8, “Beat Sync”).

While the deck is “locking up”, the BEAT SYNC key flashes, and when the sync is locked, the light lights steadily.

R LOOP key

Switches looping on and off. When looping is enabled, the key lights and the display indicator also lights.

TASCAM CD-302 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents CD-302 Do not cut off the mains plug from this equipment Important Safety PrecautionsImportant Safety Instructions Pour le Canada For CanadaTascam CD-302 Table of Contents BPM Specifications and referenceBefore you start Main featuresEnvironmental conditions Backup memory Before you start-Backup memoryAnti-shock memory Instant startPreset functions Before you start-Preset functionsDisplayed characters Before you start-Displayed charactersFront and rear panels Front and rear panels-Main unit front panel Remote control unit front panelMain unit front panel Main unit rear panelFront and rear panels-Remote control unit front panel Remote control unit rear Front and rear panels-Remote control unit rearDisplay Front and rear panels-DisplayPlayback operations Basic operationsPlay modes CueingLoop play Basic operations-Loop playSetting A-B loop points B loop play modePlayback in A-B loop play mode Clearing loop pointsALL loop Single loopTempo speed control Advanced OperationsKey pitch control SamplingAdvanced Operations-Sampling BPM Advanced Operations-Bend functionBend function Advanced Operations-Number key modes Cancellation of tempo syncNumber key modes Tempo SyncAdvanced Operations-Scratch Cancellation of beat syncScratch MemoriesAdvanced Operations-Memories Voice Reduce function Advanced Operations-Voice Reduce functionProgrammed playback Output level Advanced Operations-Output levelBrake function Deleting program stepsSetting the EOM time Advanced Operations-Setting the EOM timeTimer Play Auto ReadyAdvanced Operations-Relay Play Direct modeRelay Play Disc Tray Auto CloseAdvanced Operations-Fader and Event Start/Stop Factory PresetFader and Event Start/Stop Dimensions Specifications and referenceSpecifications Error messages, etc Specifications and reference-Error messages, etcSpare parts

CD-302 specifications

The Tascam CD-302 is a professional-grade CD player that has been specifically designed for a variety of audio applications, including broadcasting, live sound, and studio work. Offering an impressive blend of advanced features and user-friendly operation, the CD-302 stands out in the crowded market of CD players.

One of the main features of the Tascam CD-302 is its robust build quality. Constructed with a durable chassis, it is designed to withstand the rigors of professional use while ensuring reliable performance. The front panel features an easy-to-navigate interface that includes a clear LCD display, giving users quick access to track information and playback status.

The CD-302 supports a wide range of audio formats, including standard audio CDs and CD-R/RW discs, making it versatile for various types of media. The player is equipped with an innovative anti-shock system to minimize interruptions during playback, ensuring smooth operation even in challenging environments.

Another significant aspect of the Tascam CD-302 is its dual stereo outputs, which provide flexible connectivity options. Users can output audio through balanced XLR connections or unbalanced RCA outputs, allowing for easy integration into different sound systems and setups. The addition of digital outputs, including coaxial and optical, further enhances its versatility for digital audio routing.

The CD-302 also features an intuitive cueing system, which allows for precise control over playback start points. This includes capabilities for seamless looping, pitch control, and variable speed playback, making it ideal for DJs and live performers who require flexibility in their sets.

Tascam has incorporated advanced technologies into the CD-302, including high-quality digital-to-analog converters (DACs) that ensure excellent audio fidelity. With a signal-to-noise ratio that exceeds industry standards, the player delivers crisp, clear sound across the frequency spectrum.

Moreover, the Tascam CD-302 is designed for easy maintenance and has a modular construction that allows for straightforward servicing when required. This reliability and ease of use make it a preferred choice for audio professionals who need equipment that they can depend on.

In conclusion, the Tascam CD-302 is more than just a standard CD player; it is an essential tool for audio professionals. With its robust features, exceptional build quality, and advanced playback technologies, the CD-302 offers everything needed for high-quality audio reproduction in various settings.
Top Page Image Contents