Fisher-Price H4792 manual Swinging, Music

Page 13

Setup and Use

Music Button

Power Switch

3

Swinging

Make sure your child is properly secured in the seat.

Slide the swing power switch on to any of six speed settings.

Watch the toys move when the seat swings!

Be sure to slide the switch to the off position when the swing is not in use.

Hint: As with most battery-powered swings, a heavier child will reduce the amount of swinging motion on all settings. In most cases, the low setting works best for a smaller child while the high setting works best for a larger child.

Music

Push the music button once for music with low volume.

Push the music button again for music with high volume.

Push the music button a third time to turn music off.

Note: Low battery power may cause product movement to slow and sound volume to become faint or turn off all together.

If this should happen, please remove and discard all four batteries and replace with four, new “D” alkaline batteries.

4

Seat Wire

 

UPRIGHT

SEMI-RECLINE

RECLINE

Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. To adjust the seat angle:

• Lift or lower the seat wire into the grooves on the seat back.

13

Image 13
Contents IMPORTANT! Keep Instructions for Future Reference InstructionsAll Shown Actual Size PartsAssembly Correct Locate the oval end seat tube Fit the seat back to the seat bottom Assembly Tool Rounded Side Elastic Loops Holes Tabs Fit the toybar hubs to the seat tubes Assembly is now complete Battery Safety Information Battery Installation5V x LR20 Securing your Infant Setup and UseTo tighten the waist straps To loosen the waist strapsMusic SwingingTo replace the pad, refer to Assembly steps Using the Toy BarCare To remove the padConsumer Information StorageH4792pr-0726