Fisher-Price H4792 manual Fit the seat back to the seat bottom

Page 6

Assembly

Seat Back

Seat Bottom

8

• Fit the seat back to the seat bottom.

#8 x 1.9 cm Screw

Rod

9

•Insert the rod into the side opening between the seat back and seat bottom.

•Insert a #8 x 1.9 cm screw into the opening in the rod and tighten.

Raised Slots

Seat Back Wire

10

• Fit the seat back wire through the raised slots on the seat back.

11

•Fit the ends of the seat back wire into the outside holes in the seat tubes.

6

Image 6

Contents Instructions IMPORTANT! Keep Instructions for Future ReferenceParts All Shown Actual SizeAssembly Correct Locate the oval end seat tube Fit the seat back to the seat bottom Assembly Tool Rounded Side Elastic Loops Holes Tabs Fit the toybar hubs to the seat tubes Assembly is now complete Battery Installation Battery Safety Information5V x LR20 To tighten the waist straps Setup and UseSecuring your Infant To loosen the waist strapsSwinging MusicCare Using the Toy BarTo replace the pad, refer to Assembly steps To remove the padStorage Consumer InformationH4792pr-0726