HARDWARE INSTALLATION | 9 |
2.3.3 Onboard Audio Setting (JP2 ON-BOARD AUDIO)
To use an external CNR card, the onboard audio CODEC can be enabled or disabled via this jumper. Please disable the onboard audio CODEC if you want to use a PCI Sound Card or an CNR Audio Card. When you install a CNR card, remember that the onboard audio CODEC uses the primary channel. Therefore, if you want the onboard CODEC to work, you must set the CNR to be secondary.
|
| JP2 | |
| 1 | Audio | |
| 2 | ||
| 3 |
| |
Tran | 1 | Enable | |
sc | 2 | ||
| |||
en | 3 |
| |
d |
|
| |
| 1 | Disable | |
| 2 | ||
| 3 |
|