Intel TS-ASP3 user manual Video Off Method, Video Off In Suspend, Suspend Type, Modem Use IRQ

40 BIOS SETUP

1.Suspend Mode

2.HDD Power Down

There are three selections for Power Management. Two of them have fixed mode settings.

1.Min. Power Saving:

Minimum power management mode. Inactivity period is defined below:

Suspend Mode = 1 hr. HDD Power Down = 15 min.

2.Max. Power Saving:

Maximum power management mode. Inactivity period is defined below:

Suspend Mode = 1 min. HDD Power Down = 1 min.

3.User Define:

Allows you to set each mode individually. Select the time-out period for each mode shown above.

•Video Off Method

Defines the Video Off features. -Blank Screen:

Only blanks the screen. Use this for monitors without power management and “green” features.

-V/H SYNC+BLANK:

Blanks the screen and turns off vertical and horizontal scanning.

-DPMS:

The DPMS (Display Power Management System) feature allows the BIOS to control the video display card if it supports the DPMS feature.

•VIDEO Off In Suspend

This determines the manner in which the monitor is blanked. Select “Yes” to blank the monitor when the system enters suspend mode.

•Suspend Type

Select Suspend Type: “Stop Grant” or “PWR ON Suspend”.

•MODEM Use IRQ

You can select one of the following interrupt resources for modem use: “N/A”, “3”, “4”, “5”, “7”, “9”, ”10”, and “11”.