ViewSonic VS575C, VS375C manual Storage Instructions

Page 18

12

VS375C/VS575C

Note: Backup all unsaved files before you perform the following functional test.

3.To test the backup function, you may unplug the power cord of the UPS. During this test, observe that your equipment operates properly and without interruption. If you leave your UPS on continuously, it is a good idea to perform a backup function test at least once a month.

4.If you unplug the power cord, all models will beep once every 4 seconds and the Battery Mode LED will light. You can press the Test/Silence Button to silence the alarm. Plug the power cord back in after a few seconds.

3.7Storage Instructions

For extended storage in moderate climates, the battery should be charged for 12 hours every 3 months. Repeat it every 2 months in high temperature locations. Plug in the power cord to charge the battery.

Image 18
Contents User’s Guide For your records Who the warranty protects Exclusion of damages Life Support Page Important Safety Instructions Save These Instructions VS375C/VS575C Federal Communications Commission FCC Warning Table of Contents User Replaceable Battery Design OverviewFrequency Auto Sensing Over Voltage and Under Voltage Protection Schedule Shutdown & StartupData-Line Surge Protection External Views Power On/Off/Test/Silence Button Communication Port Remote Port Placement Unpacking and InspectionDetermining How Much Equipment You Can Connect to Your UPS Powering Up Your UPS VS375C/VS575CConnecting Your Equipment to the UPS Operation and Function TestStorage Instructions Electrical Specifications Output Inverter modeMechanical Specifications Environmental SpecificationsTroubleshooting Chart Problem Possible CauseUser Replaceable Battery Battery Replacement Procedure for VS375C/ VS575C Fuse Replacement Procedure