ViewSonic PJL7211 manual Enter the Security menu, Password, Change

Page 49

SECURITY menu

This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed.

To use SECURITY menu: User registration is required before using the security functions.

Enter the SECURITY menu

1.Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ► button. The ENTER PASSWORD box will be displayed.

2.Use the ▲/▼/◄/► buttons to enter the registered password. The factory default password is 2578. This password can be changed. Move the cursor to the right side of the ENTER PASSWORD box and press the ► button to display the SECURITY menu.

It is strongly recommended the factory default password to be changed as soon as possible.

If an incorrect password is input, the ENTER PASSWORD box will be displayed again. If incorrect password is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect password is input.

3.Items shown in the table below can be performed.

If you have forgotten your password

(1). While the ENTER PASSWORD box is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector.

(2). The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed.

If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will close. If necessary, repeat the process from (1).

Item

Description

 

 

 

 

 

(1) Use the ▲/▼ buttons on the SECURITY

 

 

menu to select SECURITY PASSWORD

 

 

CHANGE and press the ► button to display

 

 

the ENTER NEW PASSWORD box.

 

 

(2) Use the ▲/▼/◄/► buttons to enter the new password.

 

 

(3) Move the cursor to the right side of

 

 

the ENTER NEW PASSWORD box and

 

SECURITY

press the ► button to display the NEW

 

PASSWORD AGAIN box, enter the same

 

PASSWORD

password again.

 

CHANGE

(4) Move the cursor to the right side of the

 

 

NEW PASSWORD AGAIN box and press the

 

 

► button and the NOTE NEW PASSWORD

 

 

box will be displayed for about 30 seconds,

 

 

please make note of the password during

 

 

this time.

 

 

Pressing the ENTER button on the remote control or ► button on the

 

projector will close the NOTE NEW PASSWORD box.

 

 

• Please do not forget your password.

 

(continued on next page)

 

ViewSonic

44

PJL7211

Image 49
Contents ViewSonic For Canada FCC StatementCE Conformity for European Countries Following information is only for EU-member statesImportant Safety Instructions ViewSonic Iii Declaration of RoHS ComplianceCopyright Information Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package Projector Part namesHOT Rear panel Control panelSTANDBY/ON button Input button Computer in portReset button Remote controlEnter button Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement VCR/DVD player Connecting your devicesAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyInstalling the batteries Remote controlChanging the frequency of remote control signal About the remote control signalTurning on the power Power on/offTurning off the power STANDBY/ON button Power indicatorOperating Selecting an input signalMY Source  For a computer signal Searching an input signal For a video signal or component video signal  For no signalAdjusting the zoom and focus Adjusting the projector’s elevatorAdjusting the position Using the automatic adjustment feature For a component video signal Position buttonCorrecting the keystone distortions Using the magnify featureKeystone button Magnify ON/OFF buttonTemporarily blanking the screen Temporarily freezing the screenFreeze button Blank buttonReset button Using the menu functionEasy Menu Advanced MenuIndication Meaning Indication in OSD On Screen DisplayAspect Picture ModeKeystone Reset ECO ModeMirror Filter TimeBrightness Picture menuContrast GammaColor Color TempTint SharpnessSAVE-1, SAVE-2, SAVE-3, SAVE-4 MY MemoryOver Scan Image menuPosition Auto Adjust PhaseSize ExecuteProgressive Input menuVideo NR Color SpaceComputer Video FormatFrame Lock Resolution Setup menu Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message MyScreen LockSource Name Last selected template is displayed when the MY ButtonButton to close the displayed screen TemplateDisplay Description Closed CaptionMode ChannelAuto Search Option menuDirect on Lamp Time Auto OFFMY Button FAN Speed ServiceGhost Filter MessageKEY Lock Factory ResetRemote Freq InformationSecurity menu PasswordEnter the Security menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen Turning on the PIN Lock PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeMY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing MY TextReplacing the lamp MaintenanceType number RLC-054 DT01026 Replacing the lampLamp warning High Voltage High TemperatureCleaning and replacing the air filter Cleaning and replacing the air filter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensRelated messages TroubleshootingRegarding the indicator lamps Shutting the projector down Resetting all settingsSignal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor Space setting is not suitable Color settings are not correctly adjustedECO Mode function is working Not properly adjustedSpecification SpecificationsSpecification Computer input portSpecifications Customer Support Limited Three 3 year General Warranty What the warranty coversLimited One 1 year Heavy Usage Warranty Who the warranty protectsLimitation of implied warranties How to get serviceExclusion of damages Effect of state lawViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México

PJL7211 specifications

The ViewSonic PJL7211 is a versatile projector designed to meet the needs of both business and educational environments. With its high brightness and advanced features, it delivers exceptional performance for various presentation scenarios. One of the standout characteristics of the PJL7211 is its impressive brightness level, reaching up to 4,200 ANSI lumens. This significant brightness ensures that content remains clear and vibrant, even in well-lit rooms.

The PJL7211 boasts a native XGA resolution of 1024x768 pixels, allowing for sharp images with accurate detail. It also supports various resolutions up to Full HD, making it suitable for a wide range of content from standard presentations to high-definition videos. The projector incorporates DLP technology, which enhances color accuracy and produces smoother images with lower latency, making it ideal for both still images and dynamic video content.

In terms of connectivity, the ViewSonic PJL7211 offers a comprehensive selection of ports, including HDMI, VGA, and USB. This versatility allows users to easily connect it to laptops, desktops, and other multimedia devices without hassle. The addition of an optional wireless adapter enhances its connectivity options, enabling wireless projection from smartphones and tablets, thus adding convenience for tech-savvy users.

Another notable feature is its integrated 10W speaker, providing sufficient audio output for most small to medium-sized rooms without the need for additional sound equipment. This is especially beneficial for classrooms and small meeting rooms where space and setup time are limited.

The PJL7211 also features a user-friendly interface, making it easy for presenters to adjust settings, switch inputs, and manage presentations efficiently. Its energy-efficient design includes a long lamp life, rated at up to 15,000 hours in Eco mode, which significantly reduces maintenance costs and the frequency of lamp replacements.

With a lightweight design and robust build quality, the ViewSonic PJL7211 is portable enough for on-the-go presentations while being durable for everyday use. The combined features of high brightness, resolution versatility, extensive connectivity, and user-friendly operations make the ViewSonic PJL7211 a compelling choice for professionals looking for a reliable and effective projection solution.