ViewSonic PJL7211 manual Troubleshooting, Related messages

Page 59

Troubleshooting

If an abnormal operation should occur, stop using the projector immediately.

WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact to your dealer or service company.

Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair.

If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Related messages

When some message appears, check and cope with it according to the following table. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

Description

 

 

 

There is no input signal.

 

Please confirm the signal input connection, and the status

 

of the signal source.

 

The horizontal or vertical frequency of the input

 

signal is not within the specified range.

 

Please confirm the specs for your projector or the signal source specs.

 

An improper signal is input.

 

Please confirm the specs for your projector or the signal source specs.

 

The internal temperature is rising.

 

Please turn the power off, and allow the projector to cool

 

down at least 20 minutes. After having confirmed the

 

following items, please turn the power ON again.

 

• Is there blockage of the air passage aperture?

 

• Is the air filter dirty?

 

• Does the peripheral temperature exceed 35°C?

 

If the same indication is displayed after the remedy, please set

 

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

 

A note of precaution when cleaning the air filter.

 

Please immediately turn the power off, and clean or change

 

the air filter referring to the “Cleaning and replacing the

 

air filter” section of this manual. After you have cleaned or

 

changed the air filter, please be sure to reset the filter timer.

 

 

 

The button operation is not available with following

 

condition.

 

One of the invalid buttons on the remote control was

 

pressed.

ViewSonic

54

PJL7211

Image 59
Contents ViewSonic Following information is only for EU-member states FCC StatementFor Canada CE Conformity for European CountriesImportant Safety Instructions ViewSonic Iii Declaration of RoHS ComplianceCopyright Information Trademark acknowledgment About this manualThank you for purchasing this projector Contents Checking the contents of package HOT Part namesProjector Computer in port Control panelRear panel STANDBY/ON button Input buttonEnter button Remote controlReset button On a horizontal surface Suspended from the ceiling Setting upArrangement Arrangement VCR/DVD player Connecting your devicesAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyInstalling the batteries Remote controlChanging the frequency of remote control signal About the remote control signalSTANDBY/ON button Power indicator Power on/offTurning on the power Turning off the powerMY Source Selecting an input signalOperating  For no signal Searching an input signal For a computer signal  For a video signal or component video signalAdjusting the zoom and focus Adjusting the projector’s elevatorPosition button Using the automatic adjustment featureAdjusting the position  For a component video signalMagnify ON/OFF button Using the magnify featureCorrecting the keystone distortions Keystone buttonBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonAdvanced Menu Using the menu functionReset button Easy MenuIndication Meaning Indication in OSD On Screen DisplayKeystone Picture ModeAspect Filter Time ECO ModeReset MirrorGamma Picture menuBrightness ContrastSharpness Color TempColor TintSAVE-1, SAVE-2, SAVE-3, SAVE-4 MY MemoryPosition Image menuOver Scan Execute PhaseAuto Adjust SizeColor Space Input menuProgressive Video NRFrame Lock Video FormatComputer Resolution Setup menu Start UP Screen menuBlank MyScreen registration is finished Capturing error has occurred. Please try againDescription MyScreen Message MyScreen LockTemplate Last selected template is displayed when the MY ButtonSource Name Button to close the displayed screenChannel Description Closed CaptionDisplay ModeDirect on Option menuAuto Search Lamp Time Auto OFFMY Button Filter Message ServiceFAN Speed GhostInformation Factory ResetKEY Lock Remote FreqSecurity PasswordSecurity menu Enter the Security menuMyScreen Turning on the MyScreen PasswordTurning off the MyScreen Password If you have forgotten your PIN Code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning off the MY Text Password Turning on the MY Text PasswordMY Text Password Writing MY TextReplacing the lamp MaintenanceReplacing the lamp Type number RLC-054 DT01026Lamp warning High Voltage High TemperatureCleaning and replacing the air filter Cleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingRegarding the indicator lamps Shutting the projector down Resetting all settingsInput changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workNot properly adjusted Color settings are not correctly adjustedColor Space setting is not suitable ECO Mode function is workingComputer input port SpecificationsSpecification SpecificationSpecifications Customer Support Who the warranty protects What the warranty coversLimited Three 3 year General Warranty Limited One 1 year Heavy Usage WarrantyEffect of state law How to get serviceLimitation of implied warranties Exclusion of damagesViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México

PJL7211 specifications

The ViewSonic PJL7211 is a versatile projector designed to meet the needs of both business and educational environments. With its high brightness and advanced features, it delivers exceptional performance for various presentation scenarios. One of the standout characteristics of the PJL7211 is its impressive brightness level, reaching up to 4,200 ANSI lumens. This significant brightness ensures that content remains clear and vibrant, even in well-lit rooms.

The PJL7211 boasts a native XGA resolution of 1024x768 pixels, allowing for sharp images with accurate detail. It also supports various resolutions up to Full HD, making it suitable for a wide range of content from standard presentations to high-definition videos. The projector incorporates DLP technology, which enhances color accuracy and produces smoother images with lower latency, making it ideal for both still images and dynamic video content.

In terms of connectivity, the ViewSonic PJL7211 offers a comprehensive selection of ports, including HDMI, VGA, and USB. This versatility allows users to easily connect it to laptops, desktops, and other multimedia devices without hassle. The addition of an optional wireless adapter enhances its connectivity options, enabling wireless projection from smartphones and tablets, thus adding convenience for tech-savvy users.

Another notable feature is its integrated 10W speaker, providing sufficient audio output for most small to medium-sized rooms without the need for additional sound equipment. This is especially beneficial for classrooms and small meeting rooms where space and setup time are limited.

The PJL7211 also features a user-friendly interface, making it easy for presenters to adjust settings, switch inputs, and manage presentations efficiently. Its energy-efficient design includes a long lamp life, rated at up to 15,000 hours in Eco mode, which significantly reduces maintenance costs and the frequency of lamp replacements.

With a lightweight design and robust build quality, the ViewSonic PJL7211 is portable enough for on-the-go presentations while being durable for everyday use. The combined features of high brightness, resolution versatility, extensive connectivity, and user-friendly operations make the ViewSonic PJL7211 a compelling choice for professionals looking for a reliable and effective projection solution.