ViewSonic PJL7211 manual Regarding the indicator lamps

Page 60

Regarding the indicator lamps

When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table.

POWER

LAMP

TEMP

Description

 

indicator

indicator

indicator

 

 

 

 

 

 

 

 

Lighting

Turned

Turned

The projector is in a standby state.

 

In Orange

off

off

Please refer to the section “Power on/off”.

 

Blinking

Turned

Turned

The projector is warming up.

 

In Green

off

off

Please wait.

 

Lighting

Turned

Turned

The projector is in an on state.

 

In Green

off

off

Ordinary operations may be performed.

 

Blinking

Turned

Turned

The projector is cooling down.

 

In Orange

off

off

Please wait.

 

 

 

 

The projector is cooling down. A certain error

Blinking

(discre-

(discre-

has been detected.

 

In Red

tionary)

tionary)

Please wait until POWER indicator finishes blinking,

and then perform the proper measure using the item

 

 

 

 

 

 

descriptions below.

 

 

 

 

The lamp does not light, and there is a possibility

 

 

 

that interior portion has become heated.

 

 

 

 

Please turn the power off, and allow the projector to

Blinking

 

 

cool down at least 20 minutes. After the projector has

 

 

sufficiently cooled down, please make confirmation of

In Red

Lighting

Turned

the following items, and then turn the power on again.

or

In Red

off

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

 

In Red

 

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please change the lamp referring to the section

 

 

 

“Replacing the lamp”.

 

 

 

 

The lamp cover has not been properly fixed.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 45 minutes. After the projector has

In Red

Blinking

Turned

sufficiently cooled down, please make confirmation of

or

In Red

off

the attachment state of the lamp cover. After performing

Lighting

 

 

any needed maintenance, turn the power on again.

In Red

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

 

 

 

The cooling fan is not operating.

 

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

Turned

Blinking

sufficiently cooled down, please make confirmation

or

off

In Red

that no foreign matter has become caught in the fan,

Lighting

 

 

etc., and then turn the power on again.

 

In Red

 

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

(Continued on next page)

 

 

ViewSonic

 

 

55

PJL7211

Image 60
Contents ViewSonic FCC Statement For CanadaCE Conformity for European Countries Following information is only for EU-member statesImportant Safety Instructions Declaration of RoHS Compliance ViewSonic IiiCopyright Information About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Checking the contents of package Part names ProjectorHOT Control panel Rear panelSTANDBY/ON button Input button Computer in portRemote control Reset buttonEnter button Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Connecting your devices VCR/DVD playerConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotRemote control Installing the batteriesAbout the remote control signal Changing the frequency of remote control signalPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorSelecting an input signal OperatingMY Source Searching an input signal  For a computer signal For a video signal or component video signal  For no signalAdjusting the projector’s elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the position For a component video signal Position buttonUsing the magnify feature Correcting the keystone distortionsKeystone button Magnify ON/OFF buttonTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Advanced MenuIndication in OSD On Screen Display Indication MeaningPicture Mode AspectKeystone ECO Mode ResetMirror Filter TimePicture menu BrightnessContrast GammaColor Temp ColorTint SharpnessMY Memory SAVE-1, SAVE-2, SAVE-3, SAVE-4Image menu Over ScanPosition Phase Auto AdjustSize ExecuteInput menu ProgressiveVideo NR Color SpaceVideo Format ComputerFrame Lock Resolution Setup menu Screen menu BlankStart UP Capturing error has occurred. Please try again Description MyScreenMyScreen registration is finished MyScreen Lock MessageLast selected template is displayed when the MY Button Source NameButton to close the displayed screen TemplateDescription Closed Caption DisplayMode ChannelOption menu Auto SearchDirect on Auto OFF Lamp TimeMY Button Service FAN SpeedGhost Filter MessageFactory Reset KEY LockRemote Freq InformationPassword Security menuEnter the Security menu SecurityTurning on the MyScreen Password Turning off the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeTurning on the MY Text Password MY Text PasswordTurning off the MY Text Password MY Text WritingMaintenance Replacing the lampType number RLC-054 DT01026 Replacing the lampHigh Voltage High Temperature Lamp warningCleaning and replacing the air filter Cleaning and replacing the air filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedColor settings are not correctly adjusted Color Space setting is not suitableECO Mode function is working Not properly adjustedSpecifications SpecificationSpecification Computer input portSpecifications Customer Support What the warranty covers Limited Three 3 year General WarrantyLimited One 1 year Heavy Usage Warranty Who the warranty protectsHow to get service Limitation of implied warrantiesExclusion of damages Effect of state lawMexico Limited Warranty Viewsonic ProjectorNúmero Gratis DE Asistencia Técnica Para Todo México

PJL7211 specifications

The ViewSonic PJL7211 is a versatile projector designed to meet the needs of both business and educational environments. With its high brightness and advanced features, it delivers exceptional performance for various presentation scenarios. One of the standout characteristics of the PJL7211 is its impressive brightness level, reaching up to 4,200 ANSI lumens. This significant brightness ensures that content remains clear and vibrant, even in well-lit rooms.

The PJL7211 boasts a native XGA resolution of 1024x768 pixels, allowing for sharp images with accurate detail. It also supports various resolutions up to Full HD, making it suitable for a wide range of content from standard presentations to high-definition videos. The projector incorporates DLP technology, which enhances color accuracy and produces smoother images with lower latency, making it ideal for both still images and dynamic video content.

In terms of connectivity, the ViewSonic PJL7211 offers a comprehensive selection of ports, including HDMI, VGA, and USB. This versatility allows users to easily connect it to laptops, desktops, and other multimedia devices without hassle. The addition of an optional wireless adapter enhances its connectivity options, enabling wireless projection from smartphones and tablets, thus adding convenience for tech-savvy users.

Another notable feature is its integrated 10W speaker, providing sufficient audio output for most small to medium-sized rooms without the need for additional sound equipment. This is especially beneficial for classrooms and small meeting rooms where space and setup time are limited.

The PJL7211 also features a user-friendly interface, making it easy for presenters to adjust settings, switch inputs, and manage presentations efficiently. Its energy-efficient design includes a long lamp life, rated at up to 15,000 hours in Eco mode, which significantly reduces maintenance costs and the frequency of lamp replacements.

With a lightweight design and robust build quality, the ViewSonic PJL7211 is portable enough for on-the-go presentations while being durable for everyday use. The combined features of high brightness, resolution versatility, extensive connectivity, and user-friendly operations make the ViewSonic PJL7211 a compelling choice for professionals looking for a reliable and effective projection solution.