ViewSonic PJL7211 manual Shutting the projector down, Resetting all settings

Page 61

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

Blinking

 

 

Please turn the power off, and allow the projector to cool down at least

 

 

20 minutes. After the projector has sufficiently cooled down, please make

In Red

Turned

Lighting

confirmation of the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy, please set FAN

 

 

 

SPEED of SERVICE item in OPTION menu to HIGH.

 

 

 

It is time to clean the air filter.

Lighting

Simultaneous

Please immediately turn the power off, and clean or

change the air filter referring to the section “Cleaning

In Green

blinking in Red

and replacing the air filter”. After cleaning or changing

 

 

 

the air filter, please be sure to reset the filter timer.

 

 

 

After the remedy, reset the power to ON.

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the unit within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C).

 

 

 

 

 

 

After the treatment, reset the power to ON.

NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

Shutting the projector down

Shutdown switch

Only when the projector can not be turned off by usual procedure, please push the shutdown switch using a pin or similar, and disconnect the power plug from the power outlet. Before turning it on again, wait at least 10 minutes to make the projector cool down enough.

Resetting all settings

When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu can reset all settings (except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE and SECURITY settings and etc.) to the factory default.

ViewSonic

56

PJL7211

Image 61
Contents ViewSonic For Canada FCC StatementCE Conformity for European Countries Following information is only for EU-member statesImportant Safety Instructions ViewSonic Iii Declaration of RoHS ComplianceCopyright Information Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package Projector Part namesHOT Rear panel Control panelSTANDBY/ON button Input button Computer in portReset button Remote controlEnter button Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement VCR/DVD player Connecting your devicesAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyInstalling the batteries Remote controlChanging the frequency of remote control signal About the remote control signalTurning on the power Power on/offTurning off the power STANDBY/ON button Power indicatorOperating Selecting an input signalMY Source  For a computer signal Searching an input signal For a video signal or component video signal  For no signalAdjusting the zoom and focus Adjusting the projector’s elevatorAdjusting the position Using the automatic adjustment feature For a component video signal Position buttonCorrecting the keystone distortions Using the magnify featureKeystone button Magnify ON/OFF buttonTemporarily blanking the screen Temporarily freezing the screenFreeze button Blank buttonReset button Using the menu functionEasy Menu Advanced MenuIndication Meaning Indication in OSD On Screen DisplayAspect Picture ModeKeystone Reset ECO ModeMirror Filter TimeBrightness Picture menuContrast GammaColor Color TempTint SharpnessSAVE-1, SAVE-2, SAVE-3, SAVE-4 MY MemoryOver Scan Image menuPosition Auto Adjust PhaseSize ExecuteProgressive Input menuVideo NR Color SpaceComputer Video FormatFrame Lock Resolution Setup menu Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message MyScreen LockSource Name Last selected template is displayed when the MY ButtonButton to close the displayed screen TemplateDisplay Description Closed CaptionMode ChannelAuto Search Option menuDirect on Lamp Time Auto OFFMY Button FAN Speed ServiceGhost Filter MessageKEY Lock Factory ResetRemote Freq InformationSecurity menu PasswordEnter the Security menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen Turning on the PIN Lock PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeMY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing MY TextReplacing the lamp MaintenanceType number RLC-054 DT01026 Replacing the lampLamp warning High Voltage High TemperatureCleaning and replacing the air filter Cleaning and replacing the air filter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensRelated messages TroubleshootingRegarding the indicator lamps Shutting the projector down Resetting all settingsSignal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor Space setting is not suitable Color settings are not correctly adjustedECO Mode function is working Not properly adjustedSpecification SpecificationsSpecification Computer input portSpecifications Customer Support Limited Three 3 year General Warranty What the warranty coversLimited One 1 year Heavy Usage Warranty Who the warranty protectsLimitation of implied warranties How to get serviceExclusion of damages Effect of state lawViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México

PJL7211 specifications

The ViewSonic PJL7211 is a versatile projector designed to meet the needs of both business and educational environments. With its high brightness and advanced features, it delivers exceptional performance for various presentation scenarios. One of the standout characteristics of the PJL7211 is its impressive brightness level, reaching up to 4,200 ANSI lumens. This significant brightness ensures that content remains clear and vibrant, even in well-lit rooms.

The PJL7211 boasts a native XGA resolution of 1024x768 pixels, allowing for sharp images with accurate detail. It also supports various resolutions up to Full HD, making it suitable for a wide range of content from standard presentations to high-definition videos. The projector incorporates DLP technology, which enhances color accuracy and produces smoother images with lower latency, making it ideal for both still images and dynamic video content.

In terms of connectivity, the ViewSonic PJL7211 offers a comprehensive selection of ports, including HDMI, VGA, and USB. This versatility allows users to easily connect it to laptops, desktops, and other multimedia devices without hassle. The addition of an optional wireless adapter enhances its connectivity options, enabling wireless projection from smartphones and tablets, thus adding convenience for tech-savvy users.

Another notable feature is its integrated 10W speaker, providing sufficient audio output for most small to medium-sized rooms without the need for additional sound equipment. This is especially beneficial for classrooms and small meeting rooms where space and setup time are limited.

The PJL7211 also features a user-friendly interface, making it easy for presenters to adjust settings, switch inputs, and manage presentations efficiently. Its energy-efficient design includes a long lamp life, rated at up to 15,000 hours in Eco mode, which significantly reduces maintenance costs and the frequency of lamp replacements.

With a lightweight design and robust build quality, the ViewSonic PJL7211 is portable enough for on-the-go presentations while being durable for everyday use. The combined features of high brightness, resolution versatility, extensive connectivity, and user-friendly operations make the ViewSonic PJL7211 a compelling choice for professionals looking for a reliable and effective projection solution.