ViewSonic pjl9371 manual Adjusting the projectors elevator, Adjusting the zoom and focus

Page 23

Operating

Adjusting the projector's elevator

When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally.

Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the

front side of the projector within 12 degrees.12°

This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is adjustable while pushing the elevator button on the same side as it.

1. Holding the projector, push the elevator buttons to loose the elevator feet.

2. Position the front side of the projector to the desired height.

3. Release the elevator buttons in order to lock the elevator feet.

4. After making sure that the elevator feet are locked, put the projector down gently.

5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet.

1

5

To loose an elevator foot, push the elevator button on the same side as it.

To finely adjust, twist the foot.

CAUTION ►Do not handle the elevator buttons without holding the projector, since the projector may drop down.

►Do not tilt the projector other than elevating its front within 12 degrees using the adjuster feet. A tilt of the projector exceeding the restriction could cause malfunction or shortening the lifetime of consumables, or the projector itself.

Adjusting the zoom and focus

1. Open the zoom / focus ring cover.

2. Use the zoom ring to adjust the screen size.

3. Use the focus ring to focus the picture.

Zoom / focus ring cover

ZFOCUS

Focus ring Zoom ring

ViewSonic

18

PJL9371

Page 22 Page 24
Image 23
Page 22 Page 24
Contents ViewSonic Following information is only for EU-member states FCC StatementFor Canada CE Conformity for European CountriesImportant Safety Instructions ViewSonic Iii Declaration of RoHS ComplianceCopyright Information Trademark acknowledgment About this manualThank you for purchasing this projector Contents Checking the contents of package HOT Part namesProjector Rear panel Control panelEnter button Remote controlReset button On a horizontal surface Suspended from the ceiling Setting upArrangement Arrangement VCR/DVD player Connecting your devicesLaser and wired remote control MonitorPCAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyAbout the remote control signal Remote controlInstalling the batteries Changing the frequency of remote control signal STANDBY/ON button Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingMY Source Computer IN1 port firstPress the MY Source / DOC. Camera button on Selecting an aspect ratio Searching an input signal For a computer signal  For no signalAdjusting the zoom and focus Adjusting the projectors elevatorPosition button Using the automatic adjustment featureAdjusting the position Magnify ON/OFF buttons Using the magnify featureCorrecting the keystone distortions Keystone buttonBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonAdvanced Menu Using the menu functionReset button Easy MenuIndication Meaning Indication in OSD On Screen DisplayExecute Picture ModeAspect Auto KeystoneFilter Time ECO ModeReset MirrorGamma Picture menuBrightness ContrastSharpness Color TempColor TintSAVE-1, SAVE-2, SAVE-3, SAVE-4 Active IrisPosition Image menuOver Scan Size PhaseAuto Adjust Color Space Input menuProgressive Video NRFrame Lock Video FormatComputer Auto ó Sync on G OFFStandard ResolutionSetup menu Monitor OUT Standby ModeSpeaker VolumeAudio menu Start UP Screen menuBlank MyScreen registration is finished Capturing error has occurred. Please try againDescription MyScreen Message MyScreen LockTemplate Source NameChannel Description Closed CaptionDisplay ModeDirect on Option menuAuto Search AutoLamp Time Auto OFFMY Button Filter Message ServiceFAN Speed GhostRemote Freq Service InformationFactory Reset KEY LockSecurity PasswordSecurity menu Enter the Security menuTurning off the MyScreen Password Turning on the MyScreen PasswordIf you have forgotten your PIN Code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning off the Transition Detector Transition DetectorTurning off the MY Text Password MY Text PasswordTurning on the MY Text Password Writing IndicatorMY Text Type number RLC-053DT01055 Replacing the lamp MaintenanceReplacing the lamp Lamp warning High Voltage High TemperatureCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorTroubleshooting Related messages Regarding the indicator lamps Has become heated It is time to clean the air filterCooling fan is not operating There is a possibility that the interior portionResetting all settings Mute function is working Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableLens is dirty or misty ECO Mode function is workingNot properly adjusted Lamp is approaching the end of its product LifetimeSpecification SpecificationsSpecifications Specifications Control port of the projector RS-232C CommunicationAction Type Setting codeHeader code Packet Data size CRC flagData reply 1Dh + xxxxh Error reply 1Ch + 0000hACK reply 06h NAK reply 15hRS-232C Communication command table Be EF C7 FF Be EF CB FE Be EF CB 2F Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next Be EF FB CA Normal Be EF Customer Support Who the warranty protects What the warranty coversLimited Three 3 year General Warranty Limited One 1 year Heavy Usage WarrantyEffect of state law How to get serviceLimitation of implied warranties Exclusion of damagesViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 89 pages 55.4 Kb

pjl9371 specifications

The ViewSonic PJL9371 is a versatile projector designed to meet the demands of both corporate environments and educational institutions. Known for its high brightness and clarity, this model offers a multitude of features aimed at delivering an exceptional viewing experience.

One of the standout characteristics of the PJL9371 is its impressive brightness level, boasting up to 7,000 ANSI lumens. This level of brightness ensures that presentations and videos are clear and visible even in well-lit rooms. Such high lumen output makes it ideal for larger venues such as conference halls or classrooms where ambient light can be a challenge.

In terms of resolution, the PJL9371 supports Full HD (1920x1080), providing sharp images with vibrant colors. This enhances the viewing experience, especially for presentations that include detailed graphics or videos. The projector also utilizes advanced color technology to deliver a wider color gamut, ensuring accurate and vivid color reproduction.

Another significant feature of the PJL9371 is its long lamp life, rated up to 20,000 hours in Eco mode. This not only reduces maintenance costs but also minimizes downtime, allowing users to benefit from extended periods of usage without the need for frequent lamp replacements. This is particularly advantageous for institutions relying on projectors for daily presentations.

The PJL9371 is designed with multiple connectivity options, including HDMI, VGA, and USB, enabling users to connect various devices easily. Compatibility with different operating systems and multimedia sources provides versatility for users ranging from teachers to business professionals. Additionally, the projector supports wireless presentations, a feature that adds convenience for users looking to present without the hassle of cords.

Furthermore, the PJL9371 incorporates advanced digital image processing technology that enhances the overall image quality. Features such as keystone correction and optical zoom allow for easy adjustments to ensure a perfect projection setup. The projector also includes a built-in speaker, providing adequate sound for smaller settings without the need for external audio equipment.

Overall, the ViewSonic PJL9371 stands out in the projector market due to its high brightness, excellent image quality, and flexible connectivity options. Suitable for both educational and professional use, it combines leading technology with user-friendly features, making it a reliable choice for any presentation needs. Whether for business meetings or classroom settings, the PJL9371 delivers performance and versatility without compromise.
Top Page Image Contents