ViewSonic pjl9371 manual Turning off the Transition Detector

Page 55

SECURITY menu

Item

Description

If this function is set to the ON when the vertical angle of the projector or the MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal.

To display the signal again, set this function to the OFF.

After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off.

Keystone adjustment feature has been prohibited as long as the Transition Detector function is on.

1 Turning on the TRANSITION DETECTOR 1-1 Use the ▲/▼ cursor buttons on the SECURITY menu to select the TRANSITION DETECTOR

and press the ► cursor (or the ENTER) button to display the TRANSITION DETECTOR on/off menu.

TRANSITION

DETECTOR

1-2 Use the ▲/▼ cursor buttons on the TRANSITION DETECTOR on/off menu to select the ON. Select the ON and the current angle and the MIRROR setting will

be recorded. The ENTER NEW PASSWORD box (small) will be displayed.

1-3 Use the ▲/▼/◄/► cursor buttons to enter a password. Move the cursor to the right side of the ENTER NEW PASSWORD box (small) and press the ► cursor (or the ENTER) button to display the NEW PASSWORD AGAIN box, enter the same password again.

ENTER NEW PASSWORD

box (small)

1-4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the ► cursor (or the ENTER) button to display the NOTE NEW PASSWORD box for about 30 seconds, please make note of the password during this time.

Pressing the ► cursor (or the ENTER) button will return to the TRANSITION DETECTOR on/off menu.

Please do not forget your TRANSITION DETECTOR password.

This function will activate only when the projector is started after turning off the AC power.

This feature may not function properly if the projector is not in a stable position when the ON is selected.

2 Turning off the TRANSITION DETECTOR

2-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu. 2-2 Select the OFF to display the ENTER

PASSWORD box (large). Enter the registered password and the screen will return to the TRANSITION DETECTOR on/off menu.

If an incorrect password is input, the menu will

ENTER PASSWORD box

close. If necessary, repeat the process from 2-1.

(large)

3 If you have forgotten your password

3-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu. 3-2 Select the OFF to display the ENTER PASSWORD box (large). The 10

digit Inquiring Code will be displayed inside the box.

3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed.

(continued on next page)

ViewSonic

50

PJL9371

Image 55
Contents ViewSonic Following information is only for EU-member states FCC StatementFor Canada CE Conformity for European CountriesImportant Safety Instructions ViewSonic Iii Declaration of RoHS ComplianceCopyright Information Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package Projector Part namesHOT Rear panel Control panelReset button Remote controlEnter button Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement VCR/DVD player Connecting your devicesLaser and wired remote control MonitorPCAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyInstalling the batteries Remote controlAbout the remote control signal Changing the frequency of remote control signal STANDBY/ON button Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingPress the MY Source / DOC. Camera button on Computer IN1 port firstMY Source Selecting an aspect ratio Searching an input signal For a computer signal  For no signalAdjusting the zoom and focus Adjusting the projectors elevatorAdjusting the position Using the automatic adjustment featurePosition button Magnify ON/OFF buttons Using the magnify featureCorrecting the keystone distortions Keystone buttonBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonAdvanced Menu Using the menu functionReset button Easy MenuIndication Meaning Indication in OSD On Screen DisplayExecute Picture ModeAspect Auto KeystoneFilter Time ECO ModeReset MirrorGamma Picture menuBrightness ContrastSharpness Color TempColor TintSAVE-1, SAVE-2, SAVE-3, SAVE-4 Active IrisOver Scan Image menuPosition Auto Adjust PhaseSize Color Space Input menuProgressive Video NRFrame Lock Video FormatComputer Auto ó Sync on G OFFStandard ResolutionSetup menu Monitor OUT Standby ModeAudio menu VolumeSpeaker Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message MyScreen LockTemplate Source NameChannel Description Closed CaptionDisplay ModeDirect on Option menuAuto Search AutoLamp Time Auto OFFMY Button Filter Message ServiceFAN Speed GhostRemote Freq Service InformationFactory Reset KEY LockSecurity PasswordSecurity menu Enter the Security menuTurning off the MyScreen Password Turning on the MyScreen PasswordIf you have forgotten your PIN Code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning off the Transition Detector Transition DetectorTurning on the MY Text Password MY Text PasswordTurning off the MY Text Password MY Text IndicatorWriting Replacing the lamp MaintenanceType number RLC-053DT01055 Replacing the lamp Lamp warning High Voltage High TemperatureCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorTroubleshooting Related messages Regarding the indicator lamps Has become heated It is time to clean the air filterCooling fan is not operating There is a possibility that the interior portionResetting all settings Mute function is working Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableLens is dirty or misty ECO Mode function is workingNot properly adjusted Lamp is approaching the end of its product LifetimeSpecifications SpecificationsSpecification Specifications Control port of the projector RS-232C CommunicationAction Type Setting codeHeader code Packet Data size CRC flagData reply 1Dh + xxxxh Error reply 1Ch + 0000hACK reply 06h NAK reply 15hRS-232C Communication command table Be EF C7 FF Be EF CB FE Be EF CB 2F Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next Be EF FB CA Normal Be EF Customer Support Who the warranty protects What the warranty coversLimited Three 3 year General Warranty Limited One 1 year Heavy Usage WarrantyEffect of state law How to get serviceLimitation of implied warranties Exclusion of damagesViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 89 pages 55.4 Kb

pjl9371 specifications

The ViewSonic PJL9371 is a versatile projector designed to meet the demands of both corporate environments and educational institutions. Known for its high brightness and clarity, this model offers a multitude of features aimed at delivering an exceptional viewing experience.

One of the standout characteristics of the PJL9371 is its impressive brightness level, boasting up to 7,000 ANSI lumens. This level of brightness ensures that presentations and videos are clear and visible even in well-lit rooms. Such high lumen output makes it ideal for larger venues such as conference halls or classrooms where ambient light can be a challenge.

In terms of resolution, the PJL9371 supports Full HD (1920x1080), providing sharp images with vibrant colors. This enhances the viewing experience, especially for presentations that include detailed graphics or videos. The projector also utilizes advanced color technology to deliver a wider color gamut, ensuring accurate and vivid color reproduction.

Another significant feature of the PJL9371 is its long lamp life, rated up to 20,000 hours in Eco mode. This not only reduces maintenance costs but also minimizes downtime, allowing users to benefit from extended periods of usage without the need for frequent lamp replacements. This is particularly advantageous for institutions relying on projectors for daily presentations.

The PJL9371 is designed with multiple connectivity options, including HDMI, VGA, and USB, enabling users to connect various devices easily. Compatibility with different operating systems and multimedia sources provides versatility for users ranging from teachers to business professionals. Additionally, the projector supports wireless presentations, a feature that adds convenience for users looking to present without the hassle of cords.

Furthermore, the PJL9371 incorporates advanced digital image processing technology that enhances the overall image quality. Features such as keystone correction and optical zoom allow for easy adjustments to ensure a perfect projection setup. The projector also includes a built-in speaker, providing adequate sound for smaller settings without the need for external audio equipment.

Overall, the ViewSonic PJL9371 stands out in the projector market due to its high brightness, excellent image quality, and flexible connectivity options. Suitable for both educational and professional use, it combines leading technology with user-friendly features, making it a reliable choice for any presentation needs. Whether for business meetings or classroom settings, the PJL9371 delivers performance and versatility without compromise.