ViewSonic pjl9371 manual Enter the Security menu, Password, Change

Page 52

SECURITY menu

SECURITY menu

This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed.

To use SECURITY menu: User registration is required before using the security functions.

Enter the SECURITY menu

1.Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER PASSWORD and press the ► cursor (or the ENTER) button. The ENTER PASSWORD box will be displayed.

2.Use the ▲/▼/◄/► cursor buttons to enter the registered password. The factory default password is 4401. This password can be changed. Move the cursor to the right side of the ENTER PASSWORD box and press the ► cursor (or the ENTER) button to display the SECURITY menu.

It is strongly recommended the factory default password to be changed as soon as possible.

If an incorrect password is input, the ENTER PASSWORD box will be displayed again. If incorrect password is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect password is input.

3.Items shown in the table below can be performed.

If you have forgotten your password

(1)While the ENTER PASSWORD box is displayed, press and hold the RESET (or press the ◄ cursor and the INPUT buttons at the same time) button for about 3 seconds.

(2)The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed.

If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will close. If necessary, repeat the process from (1).

Item

Description

 

 

 

 

 

(1) Use the ▲/▼ cursor buttons on the

 

 

SECURITY menu to select SECURITY

 

 

PASSWORD CHANGE and press the ►

 

 

cursor (or the ENTER) button to display the

 

 

ENTER NEW PASSWORD box.

 

 

(2) Use the ▲/▼/◄/► cursor buttons to enter the new password.

 

 

(3) Move the cursor to the right side of the

 

 

ENTER NEW PASSWORD box and press the

 

SECURITY

► cursor (or the ENTER) button to display

 

the NEW PASSWORD AGAIN box, enter the

 

PASSWORD

 

same password again.

 

CHANGE

 

(4) Move the cursor to the right side of the NEW

 

 

PASSWORD AGAIN box and press the ►

 

 

cursor (or the ENTER) button and the NOTE

 

 

NEW PASSWORD box will be displayed for

 

 

about 30 seconds, please make note of the

 

 

password during this time.

 

 

Pressing the ► cursor (or the ENTER) button will close the NOTE NEW

 

PASSWORD box.

 

 

• Please do not forget your password.

 

(continued on next page)

 

ViewSonic

47

PJL9371

Image 52
Contents ViewSonic FCC Statement For CanadaCE Conformity for European Countries Following information is only for EU-member statesImportant Safety Instructions Declaration of RoHS Compliance ViewSonic IiiCopyright Information Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package Projector Part namesHOT Control panel Rear panelReset button Remote controlEnter button Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Connecting your devices Laser and wired remote controlMonitorPC VCR/DVD playerConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotInstalling the batteries Remote controlAbout the remote control signal Changing the frequency of remote control signal Power on/off Turning on the powerTurning off the power STANDBY/ON buttonAdjusting the volume Selecting an input signalOperating Temporarily muting the soundPress the MY Source / DOC. Camera button on Computer IN1 port firstMY Source Searching an input signal  For a computer signal For no signal Selecting an aspect ratioAdjusting the projectors elevator Adjusting the zoom and focusAdjusting the position Using the automatic adjustment featurePosition button Using the magnify feature Correcting the keystone distortionsKeystone button Magnify ON/OFF buttonsTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Advanced MenuIndication in OSD On Screen Display Indication MeaningPicture Mode AspectAuto Keystone ExecuteECO Mode ResetMirror Filter TimePicture menu BrightnessContrast GammaColor Temp ColorTint SharpnessActive Iris SAVE-1, SAVE-2, SAVE-3, SAVE-4Over Scan Image menuPosition Auto Adjust PhaseSize Input menu ProgressiveVideo NR Color SpaceVideo Format ComputerAuto ó Sync on G OFF Frame LockResolution StandardSetup menu Standby Mode Monitor OUTAudio menu VolumeSpeaker Blank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is finished MyScreen Lock MessageSource Name TemplateDescription Closed Caption DisplayMode ChannelOption menu Auto SearchAuto Direct onAuto OFF Lamp TimeMY Button Service FAN SpeedGhost Filter MessageService Information Factory ResetKEY Lock Remote FreqPassword Security menuEnter the Security menu SecurityTurning on the MyScreen Password Turning off the MyScreen PasswordPIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeTransition Detector Turning off the Transition DetectorTurning on the MY Text Password MY Text PasswordTurning off the MY Text Password MY Text IndicatorWriting Replacing the lamp MaintenanceType number RLC-053DT01055 Replacing the lamp High Voltage High Temperature Lamp warningCleaning and replacing the air filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messages Regarding the indicator lamps It is time to clean the air filter Cooling fan is not operatingThere is a possibility that the interior portion Has become heatedResetting all settings Volume is adjusted to an extremely low level Color settings are not correctly adjustedColor Space setting is not suitable Mute function is workingECO Mode function is working Not properly adjustedLamp is approaching the end of its product Lifetime Lens is dirty or mistySpecifications SpecificationsSpecification Specifications RS-232C Communication Control port of the projectorType Setting code Header code Packet Data sizeCRC flag ActionError reply 1Ch + 0000h ACK reply 06hNAK reply 15h Data reply 1Dh + xxxxhRS-232C Communication command table Be EF C7 FF Be EF CB FE Be EF CB 2F Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next Be EF FB CA Normal Be EF Customer Support What the warranty covers Limited Three 3 year General WarrantyLimited One 1 year Heavy Usage Warranty Who the warranty protectsHow to get service Limitation of implied warrantiesExclusion of damages Effect of state lawMexico Limited Warranty Viewsonic ProjectorNúmero Gratis DE Asistencia Técnica Para Todo México
Related manuals
Manual 89 pages 55.4 Kb

pjl9371 specifications

The ViewSonic PJL9371 is a versatile projector designed to meet the demands of both corporate environments and educational institutions. Known for its high brightness and clarity, this model offers a multitude of features aimed at delivering an exceptional viewing experience.

One of the standout characteristics of the PJL9371 is its impressive brightness level, boasting up to 7,000 ANSI lumens. This level of brightness ensures that presentations and videos are clear and visible even in well-lit rooms. Such high lumen output makes it ideal for larger venues such as conference halls or classrooms where ambient light can be a challenge.

In terms of resolution, the PJL9371 supports Full HD (1920x1080), providing sharp images with vibrant colors. This enhances the viewing experience, especially for presentations that include detailed graphics or videos. The projector also utilizes advanced color technology to deliver a wider color gamut, ensuring accurate and vivid color reproduction.

Another significant feature of the PJL9371 is its long lamp life, rated up to 20,000 hours in Eco mode. This not only reduces maintenance costs but also minimizes downtime, allowing users to benefit from extended periods of usage without the need for frequent lamp replacements. This is particularly advantageous for institutions relying on projectors for daily presentations.

The PJL9371 is designed with multiple connectivity options, including HDMI, VGA, and USB, enabling users to connect various devices easily. Compatibility with different operating systems and multimedia sources provides versatility for users ranging from teachers to business professionals. Additionally, the projector supports wireless presentations, a feature that adds convenience for users looking to present without the hassle of cords.

Furthermore, the PJL9371 incorporates advanced digital image processing technology that enhances the overall image quality. Features such as keystone correction and optical zoom allow for easy adjustments to ensure a perfect projection setup. The projector also includes a built-in speaker, providing adequate sound for smaller settings without the need for external audio equipment.

Overall, the ViewSonic PJL9371 stands out in the projector market due to its high brightness, excellent image quality, and flexible connectivity options. Suitable for both educational and professional use, it combines leading technology with user-friendly features, making it a reliable choice for any presentation needs. Whether for business meetings or classroom settings, the PJL9371 delivers performance and versatility without compromise.