Intel ETX CD manual Bios Requirements, Pinout Feature Connector J11, Pin Pin on ETX-CD Description

4 ETX® connectors

➤45pos,150 mm length, 0.5mm pitch, both ends opposite sides

Connector

➤

➤

Hirose - FH12-45S-0.5SH

0.50mm (.020") Pitch FFC/FPC Connector, Horizontal Right Angle, SMT, 45 Circuits

4.7.3BIOS Requirements

There is currently no support for this feature!

4.7.4Pinout Feature Connector J11

Pin Pin on ETX®-CD

Description

1	GND1	Ground
2	SDVOC_CLKN	Channel C; Clock negative
3	SDVOC_CLKN	Channel C; Clock positive
4	GND2	Ground
5	SDVOC_GREENN	Channel C; Green negative
6	SDVOC_GREENP	Channel C; Green positive
7	GND3	Ground
8	SDVOB_CLKN	Channel B; Clock negative
9	SDVOB_CLKN	Channel B; Clock positive
10	GND4	Ground
11	SDVOB_GREENN	Channel B; Green negative
12	SDVOB_GREENP	Channel B; Green positive
13	GND5	Ground
14	SDVOC_INTN	Channel C; Interrupt negative
15	SDVOC_INTP	Channel C; Interrupt positive
16	GND6	Ground
17	SDVOB_INTN	Channel B; Interrupt negative
18	SDVOB_INTP	Channel B; Interrupt positive
19	GND7	Ground
20	SDVOC_BLUEN	Channel C; Blue negative
21	SDVOC_BLUEP	Channel C; Blue positive
22	GND8	Ground
23	SDVOC_REDN	Channel C; Red negative
24	SDVOC_REDP	Channel C; Red positive
25	GND9	Ground
26	SDVOB_BLUEN	Channel B; Blue negative
27	SDVOB_BLUEP	Channel B; Blue positive
28	GND10	Ground
29	SDVOB_REDN	Channel B; Red negative
30	SDVOB_REDP	Channel B; Red positive
31	GND11	Ground
32	SDVO_FLDSTALLN	Field Stall negative
33	SDVO_FLDSTALLP	Field Stall positive
34	GND12	Ground
35	SDVO_TVCLKINN	TV Clock Input negative
36	SDVO_TVCLKINP	TV Clock Input positive
37	GND13	Ground
38	SDVO_CTRCLK	I2C based control signal for SDVO devices; clock
39	SDVO_CTRLDATA	I2C based control signal for SDVO devices; data
40	RESET#	Reset signal
41	VCC	5V power
42	VCC	5V power
43	VCC	5V power

Kontron User's Guide ETX CD 38