Intel EE110MM manual First edition, July, 669884-001, This guide covers the following product

Page 2

This guide covers the following product:

Intel Express 10/100 Stackable Hub - Management Module. Product code EE110MM.

The Management Module supports the following products:

Intel Express 10/100 Stackable Hub - 12-port TX hub. Product code EE110TX12. Intel Express 10/100 Stackable Hub - 24-port TX hub. Product code EE110TX24.

Copyright © 1997, Intel Corporation. All rights reserved.

Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497

Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to update the information contained herein.

*Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners’ benefit, without intent to infringe.

First edition

July 1997

669884-001

Image 2

Contents User Guide Intel Express 10/100 Stackable HubManagement Module 669884-001 First editionJuly This guide covers the following productQuick Start Turn on the power after installingUsing the Console Manager ContentsUsing the LCD ChapterContacting Intel Customer Support Technical InformationIndex Inside back coverOverview of Hub ManagementManaging multiple hubs Hub numbering100Mbps 100Mbps Collision domain assignmentsMIB identification 10Mbps 10MbpsLCD menu tree ConfigSet IP address Manual BootP Sleep StatsNavigating 2 Using the LCDReset button. See page Esc - use to go back a levelDomain Changing the LCD contrastViewing statistics PortChanging the IP configuration Setting the sleep modeViewing trap messages Setting the serial port baudDisabling a port Viewing About informationEnter Using the Console ManagerAccessing with the serial port To use Telnet Accessing with Telnettelnet E Toggling between insert and overstrike mode Top screen main To return to the Top screen at any time, press cTLocation System Configuration screenTop screen 1. System Configuration UsesHub 1 of Hub 2 of Hub 3 of Hub 4 of Local IP Configuration screen Top screenIP address: The unique user-assignednetwork address for the Management Module Remote IP Configuration screen •Press <CANCEL> to return to the previous menu SNMP Configuration screen 1.System Configuration SNMP configuration1.System configuration <SNMP configuration> Trap Receiving Stations screen<Define trap receiving stations> Supported traps include Port Configuration screen Top screen 2. Port configurationOK: The port is functioning normally Collision Domain Statistics screen Top screen 3. Collision domain statistics100Mbps collision domain Frames too long: The number of frames detected that exceed the maximum permitted frame size of 1518 octets Port Statistics screen traffic 4.Port statistics Statistic: trafficStatistic: Use ASor zto select the type of port statistics you want to view. Errors is the other type of statistic option you can view. See page Port Statistics screen errors 4.Port statistics Statistic: errorsStatistic: Use ASor zto select the type of port statistics to view. Traffic is the other type of statistic option you can view see page Late events: The number of collisions detected after the allowable detection period. Usually indicates a network topology problem, such as daisy-chainingtwo Express hubs running at 100 Mbps with UTP cable instead of Intel Cascade Cables in a stack, daisy-chainingtoo many hubs running at 10 Mbps, or using cables longer than 100 meters Network Health Checks screen Top screen 5. Network health checksWrong Speed Device screen Page Wrong Polarity Cabling screen Check for wrong polarity cabling to devicesPage Top Traffic Generators screen 5.Network health checks <Top traffic generators>Update interval: Selects the time period between updates. For example, an Update interval of 5 sec. means the Console Manager checks the Management Module every five seconds for the list of devices that are generating the most traffic Utilization and Collision History screen Interpreting this screen Login, Security & Reset Options screen Top screen 6. Login, security, and reset optionsFront panel reset button ResetAbout screen Top screen 7. AboutProduct name: Displays the type of device the Management Module is supporting Logout screen Top screen 8. LogoutLocating MIB files DefaultsTechnical Information Console Manager LIMITATION OF LIABILITY AND REMEDIES Limited Hardware WarrantyReturning a Defective Product RMA AVERTISSEMENT Federal Communications Commission FCC StatementManufacturer Declaration ADVERTENCIAS WARNUNGAVVERTENZA I Index Page Page Page Page Installation notes TroubleshootingSoftware updates How to access