Intel EE110MM manual

Page 43

NOTE

If the MAC address changes with the update interval, another hub, switch, or router is probably connected to the port.

Update interval: Selects the time period between updates. For example, an Update interval of 5 sec. means the Console Manager checks the Management Module every five seconds for the list of devices that are generating the most traffic.

<Scroll Down>/<Scroll Up> Moves up or down the list of top traffic generating devices.

Hub: Displays the hub number in the stack where the device is attached. The hub at the top of the stack is number one.

Port: Displays the port number in the hub where the device is attached.

Last MAC addr: Displays the hardware address of the most recent device that sent data on that port.

Octets: The number of octets (bytes) contained in frames received that had no errors. This includes octets in unicast, broadcast, and multicast frames. It also includes octets after the start frame delimiter up to FCS, but not including FCS octets.

Frames: The number of frames detected without errors. Includes unicast, broadcast, and multicast frames. Does not include frames received with frames too long, runt, FCS, or alignment errors.

42

Image 43
Contents Management Module Intel Express 10/100 Stackable HubUser Guide This guide covers the following product First editionJuly 669884-001Turn on the power after installing Quick StartChapter ContentsUsing the LCD Using the Console ManagerInside back cover Technical InformationIndex Contacting Intel Customer SupportManagement Overview of HubHub numbering Managing multiple hubs10Mbps 10Mbps Collision domain assignmentsMIB identification 100Mbps 100MbpsStats ConfigSet IP address Manual BootP Sleep LCD menu treeEsc - use to go back a level 2 Using the LCDReset button. See page NavigatingPort Changing the LCD contrastViewing statistics DomainSetting the sleep mode Changing the IP configurationViewing About information Setting the serial port baudDisabling a port Viewing trap messagesAccessing with the serial port Using the Console ManagerEnter telnet E Accessing with TelnetTo use Telnet Toggling between insert and overstrike mode To return to the Top screen at any time, press cT Top screen mainUses System Configuration screenTop screen 1. System Configuration Locationin the stack has no effect on hub numbering Top screen Local IP Configuration screenIP address: The unique user-assignednetwork address for the Management Module Remote IP Configuration screen •Press <CANCEL> to return to the previous menu 1.System Configuration SNMP configuration SNMP Configuration screen<Define trap receiving stations> Trap Receiving Stations screen1.System configuration <SNMP configuration> Supported traps include Top screen 2. Port configuration Port Configuration screenOK: The port is functioning normally Top screen 3. Collision domain statistics Collision Domain Statistics screen10Mbps collision domain Frames too long: The number of frames detected that exceed the maximum permitted frame size of 1518 octets 4.Port statistics Statistic: traffic Port Statistics screen trafficStatistic: Use ASor zto select the type of port statistics you want to view. Errors is the other type of statistic option you can view. See page 4.Port statistics Statistic: errors Port Statistics screen errorsStatistic: Use ASor zto select the type of port statistics to view. Traffic is the other type of statistic option you can view see page Late events: The number of collisions detected after the allowable detection period. Usually indicates a network topology problem, such as daisy-chainingtwo Express hubs running at 100 Mbps with UTP cable instead of Intel Cascade Cables in a stack, daisy-chainingtoo many hubs running at 10 Mbps, or using cables longer than 100 meters Top screen 5. Network health checks Network Health Checks screenWrong Speed Device screen Page Check for wrong polarity cabling to devices Wrong Polarity Cabling screenPage 5.Network health checks <Top traffic generators> Top Traffic Generators screenUpdate interval: Selects the time period between updates. For example, an Update interval of 5 sec. means the Console Manager checks the Management Module every five seconds for the list of devices that are generating the most traffic Utilization and Collision History screen Interpreting this screen Top screen 6. Login, security, and reset options Login, Security & Reset Options screenReset Front panel reset buttonTop screen 7. About About screenProduct name: Displays the type of device the Management Module is supporting Top screen 8. Logout Logout screenTechnical Information DefaultsLocating MIB files Console Manager Returning a Defective Product RMA Limited Hardware WarrantyLIMITATION OF LIABILITY AND REMEDIES Manufacturer Declaration Federal Communications Commission FCC StatementAVERTISSEMENT AVVERTENZA WARNUNGADVERTENCIAS I Index Page Page Page Page How to access TroubleshootingSoftware updates Installation notes