ViewSonic PJD5211 Utilizing the password function, Setting a password, If you forget the password

Page 25
Password Error
Please try again.

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on page 21.

You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print this user manual (if necessary) and write the password you used in this manual, and keep it in a safe place for later use.

Setting a password

Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started.

1.Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings menu. Press MODE/ENTER on the projector or Enter on the remote control. The Security Settings page is displayed.

2.Highlight Power On Lock and select On by pressing / .

3.

As pictured to the right, the four arrow keys ( ,

INPUT NEW PASSWORD

 

, , ) respectively represent 4 digits (1, 2,

 

 

 

3, 4). According to the password you desire to

 

 

set, press the arrow keys to enter six digits for the

 

 

password.

 

4.

Confirm the new password by re-entering the

MENU Back

 

new password.

 

 

Once the password is set, the OSD menu returns to the Security Settings page.

The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __ __

Keep this user manual in a safe place.

5.To leave the OSD menu, press MENU/EXIT on the projector or Exit on the remote control.

If you forget the password

If the password function is activated, you will be asked to enter the six-digit password every time you turn on the projector. If you enter the wrong password, the password error message as pictured to the right is displayed lasting for three seconds, and the message 'INPUT PASSWORD' follows. You can retry by entering another six-digit password, or if you did not

record the password in this user manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 23 for details.

If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time.

22 Operation

Page 24 Page 26
Image 25
Page 24 Page 26
Contents ViewSonic Compliance Information Actual Concentration SubstanceLead Pb Mercury Hg Cadmium Cd Hexavalent Chromium Cr6+ Polybrominated biphenyls PBBCopyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Introduction Projector featuresIntroduction Shipping contents Projector exterior view Controls and functions Projector and remote controlColor Mode Lamp indicator lightVolume keys + AutoPull out the battery holder Remote control effective rangeChoosing a location Positioning your projectorScreen Center of lens Projection dimensionsConnecting a computer Connecting a computer or monitorConnection To connect the projector to a notebook or desktop computerTo connect the projector to a monitor Connecting a monitorMonitor Computer VGA to DVI Cable VGA cable Connecting audio Connecting Video source devicesBest video quality Better video qualityTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceAV device Speakers Audio cable Video cable Cable To connect the projector to a composite Video source device Connecting a composite Video source deviceSpeakers AV device Video cable Audio cable Cable Starting up the projector OperationOperation See Timing chart on page 52 for details Use / to highlight the System Setup Basic menu Using the menusSystem Setup Basic System Setup AdvancedSetting a password Utilizing the password functionIf you forget the password New passwordChanging the password Entering the password recall procedureDisabling the password function Switching input signal Adjusting the projection angle Adjusting the projected imageAuto-adjusting the image Correcting keystone Fine-tuning the image size and claritySelecting the aspect ratio Magnifying and searching for detailsAbout the aspect ratio Picture modes for different types of signals Selecting a picture modePC input signals D-Sub / Comp /2 analog RGB Video input signals S-Video, Video, D-Sub / Comp /2 YPbPrFine-tuning the image quality in user modes Using Screen ColorSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Tint Adjusting ColorAdjusting Sharpness Adjusting Brilliant ColorColor Management To adjust the settingsLocking control keys Hiding the imageOrder to draw the audiences full attention to Freezing the image To activate the High Altitude ModeOperating in a high altitude environment Press MENU/EXIT on the projector or MenuShutting down the projector Personalizing the projector menu displayMenu system Menu operationMain menu Sub-menu Options Advanced BasicDescription of each menu Settings Color ModeReference ModeBlank Timer Auto PowerTimer ProjectorOut System Setup Advanced menu Function Description Active VGAAudio MenuLamp Advanced Settings Reset AllSecurity CurrentCare of the projector MaintenanceSetting Auto Power Off Setting Lamp mode as EconomicLamp information Getting to know the lamp hourStatus Message Timing of replacing the lampType number RLC-055 PJD5122/PJD5211/PJD5221 RLC-056 PJD5231 Replacing the lampLoosen the screw that secures the lamp Maintenance Tighten the screw that secures the lamp Resetting the lamp timerRestart the projector Power events IndicatorsLight Status & Description Lamp eventsCause Remedy TroubleshootingProjector specifications SpecificationsCeiling mount installation DimensionsTiming chart Horizontal Signal Format Horizontal Frequency kHzCopyright information Copyright informationAppendix RS232 command tableIR control table Pin assignment for this two endRS-232 protocol InterfaceBaud Rate Data Length Bit Parity Check None Stop BitContrast Write Blank on 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x09 0x01 VGA Hour Customer Support Limited Warranty PRJLW01 Rev h How to get serviceViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México

PJD5211, VS13304, VS13306, PJD5221, VS13305 specifications

The ViewSonic PJD5122, VS13308, PJD5231, VS13305, and PJD5221 are part of ViewSonic's well-regarded projector lineup, designed to cater to various projection needs. These models provide high-quality imaging, portability, and user-friendly features that make them suitable for both educational and business environments.

The ViewSonic PJD5122 is a DLP projector that boasts a native SVGA resolution of 800x600, delivering clear images with vibrant colors and a brightness of 2,600 lumens. It employs DynamicEco technology, which enables users to save energy and extend lamp life by automatically lowering brightness when the projector is not in use. Enhanced connectivity options, including HDMI, VGA, and composite inputs, make it versatile for various devices.

The VS13308 model stands out with its compact design and lightweight build, making it easy to transport. With a brightness of 3,000 lumens and a native resolution of 800x600, it excels in both dim and well-lit environments. The projector features an impressive contrast ratio, ensuring rich, dark blacks for a more dynamic viewing experience. Its long lamp life of up to 10,000 hours means reduced maintenance costs.

The PJD5231 offers a native XGA resolution of 1024x768 and a brightness of 3,000 lumens, making it ideal for classrooms and conference rooms. This model utilizes a 3D-ready capability, providing an immersive viewing experience for 3D content. Users can easily connect multiple devices through its extensive input options, including VGA and composite, enhancing its flexibility.

The VS13305 model is engineered for versatility, with a brightness of 3,200 lumens and a native resolution of 800x600. It includes features like Energy-saving mode, which decreases power consumption and extends the life of the lamp. Its lightweight design makes it suitable for mobile professionals who require seamless portability.

Lastly, the PJD5221 also offers a native XGA resolution, combined with a brightness of 3,200 lumens, ensuring crisp details even in large rooms. The projector also supports a wide range of connection options and is equipped with built-in speakers, allowing for an all-in-one entertainment solution.

Together, these projectors highlight ViewSonic's commitment to delivering innovative display solutions with cutting-edge technologies, making them reliable choices for those in need of quality projection for various applications.
Top Page Image Contents